|
CSS - What Is The Meaning Of Mso-height-source: Userset
Hi,
Can you please let me know the meaning of "mso-height-source: userset" in the css styles? I have searched in the google but I couldn't find it. Thanks, Sridhar. Similar TutorialsHi all, I am trying to automate everything on my test website and I have one more angle to cover. In effect, I want to adjust the line-height property (which I can do) based on the number of files within a specific folder (PHP and already done). The more files in the folder, the lower the line-height value must be. This is to ensure if I copy additional files into the folder, then the navigation menu (which is PHP reading files in this particular folder) will alter the CSS line-height property accordingly to ensure it can never exceed a certain height. Sounds wierd? go to www.re3.org.uk (next to the RE3 image, I have a list of hyperlinks which are obtained from files within the folder) My problem, when adjusting the CSS property (which is set as cm in *.css file) in javascript, it doesn't correspond correctly, the line-height property in javascript doesn't appear to be work in cm but some other measurement. Does anyone know how to change what unit of measurement Javascript works in? Or does anyone know what unit of measurement javascript uses when adjusting line-height / line-width values? I want to create a mini-algorithm that works out the appropriate line-height based on the image height (got that already) and the number of files in the folder (got that too) so the menu automatically adjusts to fit. Whew! Hello Just recently I had an idea for a page I wanted to make, the design is basically a 3-column layout with no traditional header or footer, the height of all three columns should run the length of the window/page height the left and rightmost column would have a fixed width or a width in em, the center column width should fill the space in between. If the content is short all columns should extend to the height of the page window, but if the content in any of the columns is longer than the window height they should all extend to reach the bottom of the page and accommodate the content length In my first attempt things didn't go so well, results varied wildly across browsers so I decided to start from scratch bit by bit Bellow is the point at which I reach consistent but undesired behaviour, I have validated and tested the code in Firefox 3/Pale Moon, Internet Explorer 8, Chromium 9, and Opera 11 I would like the end result to work in the above browsers as well as IE7 if possible I should point out now that im not interested in using faux-columns, the layout should not require images, I also wish to have absolute-positioned elements in the columns some time later Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Three Columns</title>
<style type="text/css">
*, html, body {
margin: 0;
padding: 0;
font-size: 100%;
}
html, body {
width: 100%;
height: 100%;
}
#maincontainer {
position: relative;
height: 100%;
background: #eee;
}
#left {
position: absolute;
top: 0px;
left: 0px;
width: 200px;
background: #fbb;
height: 100%;
}
#mid {
position: relative;
margin: 0 200px 0 200px;
background: #efe;
height: 100%;
}
#right {
position: absolute;
top: 0px;
right: 0px;
width: 200px;
background: #bbf;
height: 100%;
}
</style>
</head>
<body>
<div id="maincontainer">
<div id="left">
left start<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left<br />
left end<br />
</div>
<div id="mid">
mid start<br />
mid<br />
mid<br />
mid<br />
mid<br />
mid<br />
mid end<br />
</div>
<div id="right">
right start<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right<br />
right end<br />
</div>
</div>
</body>
</html>
In the above example it works as long as the content within the columns is shorter than the window height, but if you re-size the window so that the text in the right or left column goes beyond the page, and then scroll to the bottom, the columns do not extend to the bottom of the page so there is a large gap where the content overflows beyond the column What I would like to do from this point is make the columns extend to the bottom of the page when this happens, but I'm not sure how best to proceed I also have a version of the above code which uses floated left and right columns instead of absolute positioned ones, would it be better to work from that? or does it not really matter Thanks in advance It seem that everytime I added the image tag, the div'x area get bigger in IE but not in Mozilla/Firefox browser. So, I thought by added the "margin-bottom:-360px;" to the div would fix it but it had an opposite effect. Meaning it worked in IE but Mozilla show a vertical scrollbar. So, does anyone know how can I make the <img> overlap one another without being stacked on one after another in height for IE if I take out the "margin-bottom: -360px;"? Thanks... Code:
div.divBox1
{
width: 286px;
height: 359px;
float: left;
}
div.divClearFloat
{
clear: both;
height: 0px; /* For IE Stupidity (it added some spaces after clearing the float) */
font-size: 1pt; /* For IE Stupidity (minimum height only work with current font-size somewhere) */
}
div.divDottedLineAdvertisementSeperator1
{
width: 575px;
height: 3px;
background-color: #ff0000;
font-size: 1pt; /* For IE Stupidity (minimum height only work with current font-size somewhere) */
}
Code: <div class="divBox1"> <div style="margin-bottom:-360px;"> <img src="images/doctor.jpg" style="position:relative;top:0px;left:0px;z-index:2;"> <img src="images/we_help.jpg" style="position:relative;top:-360px;left:0px;z-index:1;"> </div> </div> <div class="divClearFloat"></div> <div class="divDottedLineAdvertisementSeperator1"></div> I've never done much CSS work, but I know this has to be an easy fix. Each DIV appears to be 10px higher when viewed in IE. I want them to be 8px high and they end up being 18px high. In Firefox, Netscape, and Opera it works fine. Anyone mind correcting this imbarrassing little problem? Code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" >
<head>
<title>IE 10px Padding Problem</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">
body {
margin:0px; }
#container {
position:relative;
margin:auto;
width:730px; }
#header {
height:110px; }
.textualtop {
border:1px solid #000000;
height:8px; }
.textualbottom {
border:1px solid #000000;
height:8px; }
</style>
</head>
<body>
<div id="container">
<div id="header"></div>
<div class="textualtop"></div>
<div class="textualbottom"></div>
<div class="textualtop"></div>
<div class="textualbottom"></div>
<p>Notice how in IE6 each DIV is 10px higher then in FF. Why is it doing this?</p>
</div>
</body>
</html>
Hello everybody! I have been having a big problem with my webpage for a long time now and hope I can find an answer to my problem with your help. I want a div that contains the content of my pages (which varies in length depending on the individual page) to stretch the length of my page, but it only stretches the length of the window. Here's the HTML and CSS: HTML (I only included the very basic structure): <html> <body> <div class="container"> <div id="content"> <div id="..."></div> <div id="..."></div> <div id="..."></div> <div id="..."></div> </div> </div> </body> </html>` CSS: html, body { height: 100%; font-family: Arial; font-size: 10px; color: #000000; background: #FFF url(../../images/body.png) no-repeat center 40px; margin: 0; position: relative;} .container { height: 100%; width: 960px; margin-right: auto; margin-left: auto; position: relative;} #content { width: 939px; min-height: 100%; position: relative; top: 210px; left: 6px; box-shadow: 0px 0px 8px #666; -moz-box-shadow: 0px 0px 8px #666; -webkit-box-shadow: 0px 0px 8px #666; background-color: #FFF;} I tried to set the content div to overflow: auto, but that includes a scroll bar for the content div that I do not want. It does, however, create the desired effect of the shadow and background of the #content div all the way to the end of the page. Am I missing anything? I thought min-height would work, but it doesn't! It only stretches the content div to page height and everything else is overflow, but without the content div's background color and shadow. Does anybody maybe see where the problem lies? Thank you so much in advance for your help. If you look at the bottom of the page at www.res-technologies_DOT_com/index.php?jos_change_template=restech2 in both IE and FF, you will see that it looks fine in IE, but in FF the page length is extended by exactly the height of the header image at the top of the page. Trying to figure out what's causing this is driving me nuts! Can anyone help? thx dh I am having a problem trying to get one column match the height of another. Within a large DIV box, I created two columns separated by about 20 px. I floated one to the left, then pushed one over to the right. Both boxes will expand depending on the amount of content, but I would like them to match the same height. The boxes will be used throughout the entire website, so it would not make sense to create a background image to try and trick it into being the same height.. or actually specifying the height. Is there any way to tell the left box to be the same height as the right box?? I tried to link to my site but it won't let a new member link to a website. My web page has a display bug in IE 5+ on Windows. Specifically, I have a DIV within which I wish to place two images. The two images are the same height and width, and I want to layer them (the top one is a PNG with transparency, but I have already solved that problem, this is a positioning problem) exactly on top of each other. I have done this by positioning them relatively within the DIV. The first image is top:0;left:0 and the second is top:-150;left:0 (the images are 150 px tall). They layer fine, but the DIV is twice the height (as if the second image were still following the first, making he DIV 300 px tall). I have tried many things and am stumped. Here is the site: URL Here is the relevant CSS: Code: #bannerPhoto {
border-bottom-width: 1px;
border-bottom-style: solid;
border-bottom-color: #000000;
height: 150px;
width: 750px;
}
#bannerPic {
position: relative;
z-index: 1;
left: 0px;
top: 0px;
}
#bannerText {
position: relative;
z-index: 2;
left: 0px;
top: -150px;
}
And the HTML: Code: <div id="bannerPhoto"> <div id="bannerPic"><img src="../images/bannerPhotos/image.jpg" height="150" width="750" /></div> <div id="bannerText"><img src="../images/text-cover.png" height="150" width="750" /></div> </div> Anyone? Thanks, Denver. I have the need to have the footer at the top of the source code (as near as possible), but display at the bottom of the content as one would expect for a footer. I don't want it 'fixed' at the bottom of the page, I want it to flow and scroll -- just be the last part of content that displays. May sound like a stupid request but it is for SEM/SOC. What am I missing? There has to be a simple float solution to solve this? I have easily been able to have an element at the bottom of the source float to the top, but not the reverse. Code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html lang="en">
<head><title>Test</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<style type="text/css">
#container { margin: 0 auto; width: 300px; }
#footer { }
#content { height: 100px; border: 1px solid #000; }
#left { position: relative; float: left; }
#right { position: relative; float: right; }
</style>
</head>
<body>
<div id="container">
<div id="footer">Footer</div>
<div id="header">Header</div>
<div id="content">
<div id="left">Left</div>
<div id="right">Right</div>
</div>
</div>
</body>
</html>
hello I am currently working on a website with a template from mambo open source. Unfortunately there are some icons built in the css that are rather ugly to look at. Would any one of you know how to hide them? thank you and regards, schnauzer anyway to disable a user from viewing your css source? not particular for me but, i think there might be a way with php in the css file, but it still displays the code when i go to the file Ok, so I have been reading that it is best to place text as far up in the source code as possible for search engines. That being said, is it feasible to write code that uses DIVS extensively, and by doing so, place a div for the very top of a web page at the bottom of the source code, and a div for body text at the very beginning of the source code? I hope this makes sense... Error: Material "debug/debuglightmap" uses unknown shader "LightmappedGeneric_dx8"Warning: using WorldTwoTextureBlend on a non-displacement surface.Support for this will go away soon. - Material : de_dust/groundsand_blend - Surface center : -912 64 -16Warning: using WorldTwoTextureBlend on a non-displacement surface (material: de_dust/groundsand_blend). Support for this will go away soon. (THESE ARE THE REASONS WHY MY CSS IS SCREWING UP REALLY BAD) any help please i have no idea what this means Hi ... I'm new here. I hope someone can help me. I've taken a Dreamweaver CS3 3-column template and added a fourth column. Everything looks okay until I move the "main content" column above columns 2 and 3 in the source code (so that it will load before them, because they have external content). Then I get float drop with columns 2 and 3. Since I'm a new user, I'm not allowed to post URLs, but I think if you go to my profile you can see my home page address. Then just add the following paths: Page without float drop (before changing column order) /new/index.html Page with float drop (after changing column order) /new/about.html I tested this on the basic DW template that I started with, and it has the same problem. I ran my page through the CSS validator with only two errors that I can't figure out. However, I get 75 errors when I use the XHTML validator, and I think I'll have a nervous breakdown if I have to try to fix all that. I know it's probably something to do with margins or floats, but I've tried everything I can think of and I'm at wit's end. Thanks in advance. i came across a solution for this a while ago and can't repeat the result i have 3 columns, div format with a left left right float. 1 2 3 #2 contains content that varies with the page, #1 and #3 contain background elements. i need 1 and 3 to extend the full height of 2, even tho the actual content is much less. thanks for the help! Hi Guys, Consider the following box: PHP Code: <div style=border: 1mm black Solid; width: 148mm; height: 98mm;'> </div> 148mm + 1mm + 1mm = width of 150mm 98mm + 1mm + 1mm = width of 100mm Now why does neither firefox or ie manage to get it? Firefox is about 2mm out and ie is about 3mm out? Any ideas or is it some quirk? Charlie On a CSS tutorial page, I saw an element for an "include-source" command that you can put into your style sheet. It's something like: include-source: url("test.html"); My understanding from that site was that you can put this into your style sheet. Therefore, you can have another page's contents (in my case, only text) display. In other words, whatever I had in the test.html file would display in the <div> tag on the index page where I had called it. It's not working, so what am I missing? I'm using PHP; would that be easier? What I'm trying to do is have a standard layout for all of my pages using css. Instead of having to go into each page and edit it, I'd rather have it in files that I can get into and not search through all of the PHP, HTML, CSS code. Any ideas or suggestions? Thanks. Tim if i had two left and right divisions with the right one expanding based on what content was in it. How do i get the left one to grow to the height of the right one? Or is this impossible? Okay, I can't quite seem to figure out what is wrong here. I can get the background to stretch 100%, basically whatever your screen views at, but thats it, if the page continues on, and you have to scroll, the background doesn't continue on with the site, it stops at the bottome of your screen when it is at the top of the page. My site can be viewed he http://www.skilla.shiverlabs.net/cms/ My CSS can be viewed he http://www.skilla.shiverlabs.net/cms/site.css Any helps is appreciated greatly, thanks. Also, please note: the problem only occurs in Mozilla FireFox Im trying to create a devider between 2 lines of text in an href like this Code:
.devide{
padding:0px;
margin:0px;
border:0px;
width:100%;
height:1px;
background-color: #666666;
}
<a href = "blah">Line 1<div class="devide"></div>line2</href>
In Firefox this looks great but in IE it is about 10-15 px in height. Aside from putting a 1px image in there (not even sure if that will work) how can I fix this? |
|||||||