HTML - Link To Specific Content On Page With No Anchors

Hello Folks

I want to be able to anchor to not only a different page, this is a simple link, but I also want to be able to go to a specific point on that new page from the original hyper link...

Example;

I am viewing on page "A," on my site and I want to set a link on page "A" to take me to page "B" to the word "Widget."

On page "B" I have the word "Widget" 2/3rds the way down the page.

I want to go further than just to the top of page "B," I want my SAME link from page "A" to take me to the word "Widget" that is near the bottom of the page "B" all in the same link. (One click)

I understand I am going to need to set code at each word, this is a lot of work and this is OK..

Thank You So Very Much for any assistance

David

I'm using an iframe to show an external page.
I want the iframe to open to a certain part of that page.
Problem is, it's like 2 pages down on the external page.

How can I make it scroll down and show only that part?

I have created a web page in ASP.Net, but completely using HTML codes. This web page shows first 25 hit movies in year wise. I have 2006, 2007 and 2008 year's details in 3 different tables (HTML Tables). All of them are in one page

When user clicks main page, it shows all the three year details in tables. User has to scroll down the apge to see full details. Here, I want to give 3 page sections (or page breaks).. If user clicks main page urs, it should show all and user have to scroll down...if user press 2006, it shoud take him to that specific area. If similarly if user clicks 2007, it should take him/her to 2007 details area..

How to do this? I heard that with 'submenubullet', we can do this...Please help me on this

Hi guys. I have no idea which category to post this in, or if it's even possible to achieve, so think of it as a challenge to your web skills

In Visual Basic you can build a routine that checks a value (such as today's date). If today's date matches the date stored then an action will occur.

My question is, can this be done with a web page?

I'd like an index page to be active until a certain date, and after that date I would like it to automatically redirect to a different page which carries a message for the user. The page should operate completely normally until the date I set is reached, with no sign that anything is going to happen. Once the date is reached, anyone calling the index page will be instantly redirected to my message page instead.

What do you think? Is it a possibility?

Hi there i was wondering if it was possible to click on an image that has been mapped and have it open another web page but at a specific location. for example i have a large image of the U.S. i would like to have a smaller image that is mapped to be able to jump to the larger image at that specific location like if i click the northeast porition of the U.S. on the small image i would like it to load the larger image at the northeast porition of the U.S. using just html if possible? thanks for any help.

I need to know how to define in html a 'class' for lack of a better term so i can make the hyperlink go to page.html#specificpoint

I know how to do the hyperlink, just not define where it would load to...

Hello!

I'm kinda stuck trying to get this idea on HTML for my web site:

www.luzvenidera.com/webnueva/indexinframe.htm

This is the thing: I want the content to appear in the main rectangle, and have it resize automatically to the content. I have been able to do this with an inframe and using a specific script. Next to the content there are cells with an image that should go on the top of each cell and a background tiled image that continues the pattern. At least on my computer, the current code works in IE7, but in FF3 the image inside the side cells ends up showing in the middle instead of the top.

I have also read that using inframe isn't really a good idea for the main content section of the page, for a variety of reasons including that it's not search engine friendly, so I'm trying to figure out an alternative..

I'm stuck here. If I make an entire frame beneath the navigation bar and just add the content there then the scroll bar would only show up for that frame, that is, beneath the navigation bar. I want the whole page to have the scroll bar, I don't want the header and navigation bar to stay in place while the rest of the content is scrolled as the background in the sides would break.

My questions would be: what should I do to make it so I have the content in a frame, having it expand so the content would fit, without screwing up the side bars and making the whole page scrollable to read the content?

I really don't want to make an instance of the whole page tailored to each section's content.

I'm also getting ActiveX warnings in IE that prevent the inframe to show up unless it's manually permitted.. if I'm forced to use inframe, is there any way to prevent this?

I hope I'm being clear, and would really appreciate any advice! I'm new to most of this stuff, and I got a big headache trying to figure this one out!

Thanks in advance!

Hello,
I'm a windows app programmer, but don't know too much about HTML. I use Frontpage to maintain my web site.

I need to check the referring page, and if it equals what I want, then I need to redirect to another page.

OK, to explain further, I've had a web site for years. Lets call it www.p.com. Yesterday, I registered two new domain names, we'll call them www.a.com and www.b.com. I had my web host simply make them pointers directly to www.p.com.

So, when users type in www.a.com or www.b.com, they are automatically taken to www.p.com. This is OK...but, it is causing some issues.

What I'd like to do is, when the page (www.p.com) is loaded, I want the page to check the page the user came from, such as www.a.com. If it was www.a.com or www.b.com, then I want to re-load www.p.com, so that the page is refreshed so that it actually was www.p.com and not a re-direct from www.a.com.

Can I do this? and how can this be done?

Many thanks in advance!

domls

Hi guys,

I'm working on a project which requires an HTML page to be updated regularly, say every 10 seconds. however its not the whole page i need to refresh but rather a section of it.

that section in question is a table that has status icons within. those status Icons receive values from a server and update accordingly.

the following code corresponds to those images you see in the attachment.

HTML Code:

      <td width="100" style="TEXT-ALIGN:center" onclick="showNFailDialog('{IP_ID}','{ZONE_ID}','{GROUP_ID}');">
       <IMG style="WIDTH:24px;HEIGHT:22px;CURSOR:hand" class="ZState NFail" name="disp" alt="Zone {ZONE_ID}"
            src="../../Icons/circle_cancel.png"
            eis="name:{IP_ID}.{ZONE_ID}.{GROUP_ID}.Alarm;type:1;virtual:1;img0:/Icons/circle_green.png;img1:/Icons/circle_red.png;">
      </td>

this line basically says value 0 shows green, value 1 shows red..
img0:/Icons/circle_green.png;img1:/Icons/circle_red.png

Is there a way I can insert some code into the image section that makes the image refresh every so often but without refreshing the whole page/table

your help is greatly appreciated

Trying to see if someone has a work around for this. I have a vbulletin forum with a shoutbox and I would like to move the shoutbox to a page outside of the forum. I did this before with an iframe when I had phpbb3 but have not been able to do this with vbulletin.

I now have the shoutbox on an external page but it still contains the header and footer and I have not found a way to remove these. I just need the actual shoutbox approx 730px by 350px. Is there a way to pull only the specific area of a page to another page?

*****Edit Resolved *********

Hi guys!

I need to show the content of a html link (<a href>) in an iframe placed into div tags, hiding the content between the divs when I click the link .
I do the following :

heading.html
Code:

<a href="http://maps.google.es  target="centre">Where are </a>

and in the div placed behind of the link , I do the following:


index.html
Code:

  <div id="centre"> 
                 <iframe src="../html/heading.html" name="centre">  -->
                        <form action="../Fillm" method="post">  
                          ...
                       </form>
                  </iframe>
   </div>

But the page appears me duplicated, one above and the other page behind this one, and when I click the link, the content appears me in the behind page.

I would be grateful if somebody could help me, because I am Stuck.

Bye

Hello,

I have a html page and a drop down menu on top. The drop down menu is for like users. The user has to pick their role and based on that, the page will only show some parts of the content.

So I have the drop down on top (e.g Developer, Editor, etc) and based on what they pick, hide the contents that they're not supposed to see.

Is this possible with HTML? What do I need to do?

Disregard this post

It's seems I've come across a problem. When the page loads, I want it to go to the anchor. Do I have to use the "onload" Java command?

Arrrg,

- Miles

I would like to use anchors to move down a long scrolling section of my page. The idea is like freezing the top of a spread-sheet. The top section is fixed and has a solid background and a high z-index. The bottom is similar to the top section. The middle shows the low z-index section and allows it to scroll. Since the top is currently set to a height of 200px, I need to have my anchors offset by 200px.

I have this line of code showing in the top section:
<a href="#line1">group 1</a>, <a href="#line2">group 2</a>, <a href="#line3">group 3</a>, <a href="#line4">group 4</a>

Down in the code for the middle section I have code that looks like this:
<a name="line1" id="line1">Group 1</a> repeated for four groups of text.

The problem is that an anchor moves to the top of the browser window which is 200px above the area that is visible.

Here are two links http://www.roberson-family.com/testing/scroll_test.html this is showing the problem.

http://www.roberson-family.com/testi...ll_test_1.html and this is showing the cause of the problem. You can see that the underlying text aligns to the top of the browser.

Surely there is a method to do this, but thus far, Google has failed me, and I find nothing like this here.