|
JavaScript - Check For Errors First And Then Send To Email. Not Just Send To Email First.
I'm creating a validation form. It's basic information but I want the form to be sent to my email after the form has been validated. My problem right now is when I hit submit my email comes up so I can send it to the assigned email address. It's not checking for errors first. I have created 5 different validation forms and I'm running across the same problem. I'm not sure if it's a function or form issue maybe even both. Any advice would be highly appreciated.
Code: <script type="text/javascript">
/* <![CDATA[ */
/* ]]> */
function checkForNumber(fieldValue) {
var numberCheck = isNaN (fieldValue);
if (numberCheck ==true) {
window.alert("You must enter a numeric value!");
return false;
}
else
return true;
}
function checkForLetter(fieldValue) {
var alphaCheck= /^[A-Za-z]+$/ (fieldValue);
if (alphaCheck == true) {
window.alert("You must enter letters only!");
return false;
}
else
return true;
}
function checkEmail(fieldValue) {
var emailCheck = /^\w+([/.-]?\w+)*@\w+([\-]?\w+)*(\.\w{2.3})+$/ (fieldValue);
if (emailCheck == true) {
window.alert("Please enter a valid email address!");
return false;
}
else
return true;
}
function checkAlphanumeric(fieldValue) {
var alphanumericCheck = /^[0-9a-zA-Z]+$/ (fieldValue);
if (alphanumericCheck == true) {
window.alert("Please enter an alphanumeric address!");
return false;
}
else
return true;
}
function buttonPic() {
for (var i=0; i<document.forms.morePic.length; ++i) {
if (document.forms[0].morePic[i].checked == true) {
document.forms[0].morePic[i].checked = false;
break;
}
}
}
function checkPurch() {
for (var j=0; j<document.forms.purchase.length; ++j) {
if (document.forms[0].purchase[j].checked == true) {
document.forms[0].purchase[j].checked = false;
break;
}
}
}
function confirmSubmit() {
var submitForm = window.confirm("Are you sure you want to submit form?");
if (document.forms[0].name_info.value == ""
|| document.forms[0].address_info.value == ""
|| document.forms[0].city_info.value == ""
|| document.forms[0].state_info.value == ""
|| document.forms[0].zip_info.value == "") {
window.alert("You must enter your address.");
return false;
}
else if (document.forms[0].validateEmail.value == "") {
window.alert("Please enter a email address where I can contact you.");
return false
}
var picSelected = false;
for (var i=0; i < 2; ++i) {
if (document.forms[0].morePic[i].checked == true) {
picSelected = true;
break;
}
}
if (picSelected! = true) {
window.alert("Please select if you would like more pictures.");
return false;
}
var purchSelected = false;
for (var j=0; j<2; ++j) {
if (document.forms[0].purchase[j].check == true) {
purchSelected = true;
break;
}
}
if (purchSelected! = true) {
window.alert("Please select if you are interested in one or two vehicles.");
return false;
return true;
}
function confirmReset() {
var resetForm = window.confirm("Are you sure you want to reset this form.");
if (resetForm == true)
return true;
return false;
}
}
</script>
</head>
<body>
<p>Full Name:<input type="text" name="name_info" size="30" onblur="return checkForLetter(this.value);"/></p>
<p>Street Address:<input type="text" name="address_info" size="50" onblur="return checkAlphanumeric(this.value);"/></p>
City:<input type="text" name="city_info" size="20" onblur="return checkForLetter(this.value);"/>    
State:
<select name="state_info">
<option value="chooseYourState">Choose Your State</option>
<option value="alabama">Alabama</option>
<option value="alaska">Alaska</option>
<option value="arizona">Arizona</option>
</select>    
Zip Code:
<input type="text" name="zip_info" size="10" onblur="return checkForNumber(this.value);"/></p>
Email Address:
<input type="text" name="validateEmail" size="30" onblur="return checkEmail(this.value);"/></p>
<p>Would you like more pictures sent to your email?</p>
<input type="radio" name="morePic" value="Yes" onblur="return buttonPic();"/>Yes        
<input type="radio" name="morePic" value="No" onblur="return buttonPic();"/>No
<p>Are you thinking about purchasing one or two vehicles?</p>
<input type="checkbox" name="purchase" value="One" onblur="return checkPurch();"/>One        
<input type="checkbox" name="purchase" value="Two" onblur="return checkPurch();"/>Two
<form action="mailto:abc@yahoo.com" method="get">
<p><input type="submit" value="Send" onsubmit="return confirmSubmit();"/>
<input type="reset" value="Reset" onreset="return confirmReset();"/></p>
</form>
Similar TutorialsHi, Im using the old nopcard scripts on my site. It does every thing right except it does not send a Email to my to my email adres. I dont know how to correct this because i dont know Javascript. I include the script if anybody know how to alter it so that it will send the info to my email adres as well. Thank you very much for your previous help. Kees Meyer Oudtshoorn South Africa. The checkout.pl script : #!/usr/bin/perl #=====================================================================|| # NOP Design JavaScript Shopping Cart || # PERL CGI Checkout Module || # || # For more information on SmartSystems, or how NOPDesign can help you || # Please visit us on the WWW at http://www.nopdesign.com || # || # Javascript portions of this shopping cart software are available as || # freeware from NOP Design. You must keep this comment unchanged in || # your code. For more information contact FreeCart@NopDesign.com. || # || # JavaScript Shop Module, V.4.4.0 || #=====================================================================|| # || # Function: Writes available form elements from the NOP || # Free Cart (http://www.nopdesign.com/freecart) || # and other form elements to an email file, and || # send user confirmation || # || #=====================================================================|| require 5.001; ######################################################################## # # # User defined variables: # # $header - string value containing the complete # # path of the HTML page header # # $footer - string value containing the complete # # path of the HTML page footer # # $mailprogram - string value containing the complete path to # # the sendmail binary on the system. # # $youremail - string value containing the email address to # # send catalog orders in EMAIL or BOTH modes # # **Don't forget to put a \ before the @ in your # # email address. ie. spam\@nopdesign.com*** # # $returnpage - URL to send user when checkout is complete # # $csvfilename - string value containing the complete # # path of the user database. # # $csvquote - string value containing what to use for quotes # # in the csv file (typically "" or \") # # $mode - string value containing 'EMAIL', 'FILE' or # # 'BOTH' to determine if the script should send # # an email to you with the new order, write the # # order to a CSV file, or do both. # ######################################################################## $header = "header.html"; $footer = "footer.html"; $mailprogram = "/usr/lib/sendmail -t"; $returnpage = "/"; $youremail = "support\@ebookstore.co.za"; $csvfilename = "orders.csv"; $csvquote = "\"\""; $mode = "BOTH"; #These are required fields. I recommend enforcing these by javascript, #but let's just make sure here as well. @required = ( 'b_first', 'b_last', 'b_addr', 'b_city', 'b_state', 'b_zip', 'b_phone', 'b_email' ); ############################################################## #FUNCTION: urlDecode # #RETURNS: The decoded string. # #PARAMETERS: An encoded string. # #PURPOSE: Decodes a URL encoded string. # ############################################################## sub urlDecode { my ($string) = @_; $string =~ tr/+/ /; $string =~ s/%([\dA-Fa-f][\dA-Fa-f])/pack ("C", hex($1))/eg; $string =~ s/['"]/\'/g; return ($string); } ############################################################## #FUNCTION: processCGI # #RETURNS: # #PARAMETERS: # #PURPOSE: Retrieves form data submitted via the 'GET' # # method and decodes it. You may then access # # the passed in variables via calls to $[name] # # where [name] is the name of the form element. # ############################################################## sub processCGI { local ($cgiData, $key, $value, $pair, @pairs); if ($ENV{'REQUEST_METHOD'} eq 'GET') { $cgiData = $ENV{'QUERY_STRING'}; } else { $cgiData = <STDIN>; } @pairs = split (/&/, $cgiData); foreach $pair (@pairs) { ($key, $value) = split (/\=/, $pair); $key = &urlDecode($key); $value = &urlDecode($value); if(defined ${$key}){ ${$key} .= ", ".$value; }else{ ${$key} = $value; } } } ############################################################## #FUNCTION: doFormError # #RETURNS: # #PARAMETERS: A error message string. # #PURPOSE: Generates an HTML page indicating a form # # submission error occurred. # ############################################################## sub doFormError { my ($errString) = @_; open (HEAD, $header); @LINES = <HEAD>; close HEAD; print "Content-type: text/html\n\n"; print @LINES; print "<FONT SIZE=+2>The form you submitted was not complete.<BR><BR></FONT>"; print "$errString<BR><BR>\n"; print "<INPUT TYPE=BUTTON ONCLICK='history.back()' VALUE=' Return to the checkout page '><HR>"; open (FOOT, $footer); @LINES = <FOOT>; close FOOT; print @LINES; exit; } ############################################################## #FUNCTION: doError # #RETURNS: # #PARAMETERS: A error message string. # #PURPOSE: Generates an HTML page indicating an error # # occurred. # ############################################################## sub doError { my ($errString) = @_; print "Content-type: text/html\n\n"; open (HEAD, $header); @LINES = <HEAD>; close HEAD; print @LINES; print "$errString<BR><BR>\n"; open (FOOT, $footer); @LINES = <FOOT>; close FOOT; print @LINES; exit; } ############################################################## #FUNCTION: invalidE # #RETURNS: 1 if invalid, 0 if valid. # #PARAMETERS: An email address variable. # #PURPOSE: Checks to see if a submitted email address is # # of the valid form 'x@y'. # ############################################################## sub invalidE { my ($szEmail) = @_; my ($user, $host); $szEmail =~ tr/A-Z/a-z/; if ($szEmail =~ /\s/) { return 1; } ($user, $host) = split (/\@/, $szEmail); if ($host =~ /compuserve/i) { ; } else { if (! $user =~ /\D/) { return 1; } if (! $host =~ /\D/) { return 1; } if (substr ($user,0,1) !~ /[a-z]/) { return 1; } } if ($szEmail =~ /\w+\@[\w|\.]/) { return 0; } else { return 1; } } sub populateDateVar { (Taken out because Text to long for email) "===================================================================== \n"; print MAIL "$QUANTITY_1 \R$PRICE_1 $ID_1 - $NAME_1 $ADDTLINFO_1 \n"; if( $NAME_2 ) {print MAIL "$QUANTITY_2 \R$PRICE_2 $ID_2 - $NAME_2 $ADDTLINFO_2 \n";} if( $NAME_3 ) {print MAIL "$QUANTITY_3 \R$PRICE_3 $ID_3 - $NAME_3 $ADDTLINFO_3 \n";} if( $NAME_4 ) {print MAIL "$QUANTITY_4 \R$PRICE_4 $ID_4 - $NAME_4 $ADDTLINFO_4 \n";} if( $NAME_5 ) {print MAIL "$QUANTITY_5 \R$PRICE_5 $ID_5 - $NAME_5 $ADDTLINFO_5 \n";} if( $NAME_6 ) {print MAIL "$QUANTITY_6 \R$PRICE_6 $ID_6 - $NAME_6 $ADDTLINFO_6 \n";} if( $NAME_7 ) {print MAIL "$QUANTITY_7 \R$PRICE_7 $ID_7 - $NAME_7 $ADDTLINFO_7 \n";} if( $NAME_8 ) {print MAIL "$QUANTITY_8 \R$PRICE_8 $ID_8 - $NAME_8 $ADDTLINFO_8 \n";} if( $NAME_9 ) {print MAIL "$QUANTITY_9 \R$PRICE_9 $ID_9 - $NAME_9 $ADDTLINFO_9 \n";} if( $NAME_10 ){print MAIL "$QUANTITY_10 \R$PRICE_10 $ID_10 - $NAME_10 $ADDTLINFO_10 \n";} if( $NAME_11 ){print MAIL "$QUANTITY_11 \R$PRICE_11 $ID_11 - $NAME_11 $ADDTLINFO_11 \n";} if( $NAME_12 ){print MAIL "$QUANTITY_12 \R$PRICE_12 $ID_12 - $NAME_12 $ADDTLINFO_12 \n";} if( $NAME_13 ){print MAIL "$QUANTITY_13 \R$PRICE_13 $ID_13 - $NAME_13 $ADDTLINFO_13 \n";} print MAIL "===================================================================== \n"; print MAIL "SUBTOTAL: $SUBTOTAL \n"; print MAIL "TOTAL: $TOTAL \n"; print MAIL "\n"; print MAIL "\n\n"; print MAIL "Comments: \n"; print MAIL "--------- \n"; print MAIL "$comment \n"; print MAIL " \n"; close MAIL; } if( $mode eq "BOTH" || $mode eq "FILE") { $csvcomments = $comment; #$csvcomments =~ s/\"/$csvquote/ig; open (CSVF,">>$csvfilename"); print CSVF "\""; print CSVF "$months[$month] $day, $year $hour:$min:$sec"; print CSVF "\",\""; print CSVF "$b_first"; print CSVF "\",\""; print CSVF "$b_last"; print CSVF "\",\""; print CSVF "$b_addr"; print CSVF "\",\""; print CSVF "$b_addr2"; print CSVF "\",\""; print CSVF "$b_city"; print CSVF "\",\""; print CSVF "$b_state"; print CSVF "\",\""; print CSVF "$b_zip"; print CSVF "\",\""; print CSVF "$b_phone"; print CSVF "\",\""; print CSVF "$b_fax"; print CSVF "\",\""; print CSVF "$b_email"; print CSVF "\",\""; print CSVF "$s_first"; print CSVF "\",\""; print CSVF "$s_last"; print CSVF "\",\""; print CSVF "$s_addr"; print CSVF "\",\""; print CSVF "$s_addr2"; print CSVF "\",\""; print CSVF "$s_city"; print CSVF "\",\""; print CSVF "$s_state"; print CSVF "\",\""; print CSVF "$s_zip"; print CSVF "\",\""; print CSVF "$s_phone"; print CSVF "\",\""; print CSVF "$QUANTITY_1"; print CSVF "\",\""; print CSVF "\R$PRICE_1"; print CSVF "\",\""; print CSVF "$ID_1"; print CSVF "\",\""; print CSVF "$NAME_1"; print CSVF "\",\""; print CSVF "$ADDTLINFO_1"; print CSVF "\",\""; print CSVF "$QUANTITY_2"; print CSVF "\",\""; print CSVF "\R$PRICE_2"; print CSVF "\",\""; print CSVF "$ID_2"; print CSVF "\",\""; print CSVF "$NAME_2"; print CSVF "\",\""; print CSVF "$ADDTLINFO_2"; print CSVF "\",\""; print CSVF "$QUANTITY_3"; print CSVF "\",\""; print CSVF "\R$PRICE_3"; print CSVF "\",\""; print CSVF "$ID_3"; print CSVF "\",\""; print CSVF "$NAME_3"; print CSVF "\",\""; print CSVF "$ADDTLINFO_3"; print CSVF "\",\""; print CSVF "$QUANTITY_4"; print CSVF "\",\""; print CSVF "\R$PRICE_4"; print CSVF "\",\""; print CSVF "$ID_4"; print CSVF "\",\""; print CSVF "$NAME_4"; print CSVF "\",\""; print CSVF "$ADDTLINFO_4"; print CSVF "\",\""; print CSVF "$QUANTITY_5"; print CSVF "\",\""; print CSVF "\R$PRICE_5"; print CSVF "\",\""; print CSVF "$ID_5"; print CSVF "\",\""; print CSVF "$NAME_5"; print CSVF "\",\""; print CSVF "$ADDTLINFO_5"; print CSVF "\",\""; print CSVF "$QUANTITY_6"; print CSVF "\",\""; print CSVF "\R$PRICE_6"; print CSVF "\",\""; print CSVF "$ID_6"; print CSVF "\",\""; print CSVF "$NAME_6"; print CSVF "\",\""; print CSVF "$ADDTLINFO_6"; print CSVF "\",\""; print CSVF "$QUANTITY_7"; print CSVF "\",\""; print CSVF "\R$PRICE_7"; print CSVF "\",\""; print CSVF "$ID_7"; print CSVF "\",\""; print CSVF "$NAME_7"; print CSVF "\",\""; print CSVF "$ADDTLINFO_7"; print CSVF "\",\""; print CSVF "$QUANTITY_8"; print CSVF "\",\""; print CSVF "\R$PRICE_8"; print CSVF "\",\""; print CSVF "$ID_8"; print CSVF "\",\""; print CSVF "$NAME_8"; print CSVF "\",\""; print CSVF "$ADDTLINFO_8"; print CSVF "\",\""; print CSVF "$QUANTITY_9"; print CSVF "\",\""; print CSVF "\R$PRICE_9"; print CSVF "\",\""; print CSVF "$ID_9"; print CSVF "\",\""; print CSVF "$NAME_9"; print CSVF "\",\""; print CSVF "$ADDTLINFO_9"; print CSVF "\",\""; print CSVF "$QUANTITY_10"; print CSVF "\",\""; print CSVF "\R$PRICE_10"; print CSVF "\",\""; print CSVF "$ID_10"; print CSVF "\",\""; print CSVF "$NAME_10"; print CSVF "\",\""; print CSVF "$ADDTLINFO_10"; print CSVF "\",\""; print CSVF "$QUANTITY_11"; print CSVF "\",\""; print CSVF "\R$PRICE_11"; print CSVF "\",\""; print CSVF "$ID_11"; print CSVF "\",\""; print CSVF "$NAME_11"; print CSVF "\",\""; print CSVF "$ADDTLINFO_11"; print CSVF "\",\""; print CSVF "$QUANTITY_12"; print CSVF "\",\""; print CSVF "\R$PRICE_12"; print CSVF "\",\""; print CSVF "$ID_12"; print CSVF "\",\""; print CSVF "$NAME_12"; print CSVF "\",\""; print CSVF "$ADDTLINFO_12"; print CSVF "\",\""; print CSVF "$QUANTITY_13"; print CSVF "\",\""; print CSVF "\R$PRICE_13"; print CSVF "\",\""; print CSVF "$ID_13"; print CSVF "\",\""; print CSVF "$NAME_13"; print CSVF "\",\""; print CSVF "$ADDTLINFO_13"; print CSVF "\",\""; print CSVF "$SUBTOTAL"; print CSVF "\",\""; print CSVF "$TOTAL"; print CSVF "\",\""; print CSVF "$SHIPPING"; print CSVF "\",\""; print CSVF "$comment"; print CSVF "\"\n"; close CSVF; } # Send email conformation to the customer..... open (MAIL,"|$mailprogram"); print MAIL "To: $b_email\n"; print MAIL "From: $youremail\n"; print MAIL "Subject: Order Confirmation\n"; print MAIL "\n\n"; print MAIL "A new order has been received. A summary of this order appears below.\n"; print MAIL "\n"; print MAIL "Order Date: $months[$month] $day, $year $hour:$min:$sec \n"; print MAIL " \n"; print MAIL "Bill To: \n"; print MAIL "-------- \n"; print MAIL " $b_first $b_last \n"; print MAIL " $b_addr \n"; print MAIL " $b_addr2 \n"; print MAIL " $b_city, $b_state $b_zip \n"; print MAIL " $b_phone \n"; print MAIL " $b_fax \n"; print MAIL " $b_email \n"; print MAIL " \n"; print MAIL " \n"; print MAIL "-------- \n"; if ( $s_addr eq "" ) { print MAIL " Use Billing Address\n"; } else { print MAIL " $s_first $s_last \n"; print MAIL " $s_addr \n"; print MAIL " $s_addr2 \n"; print MAIL " $s_city, $s_state $s_zip \n"; print MAIL " $s_phone \n"; } print MAIL " \n"; print MAIL " \n"; print MAIL "Qty Price(\R) Product ID - Product Name\n"; print MAIL "===================================================================== \n"; print MAIL "$QUANTITY_1 \R$PRICE_1 $ID_1 - $NAME_1 $ADDTLINFO_1 \n"; if( $NAME_2 ) {print MAIL "$QUANTITY_2 \R$PRICE_2 $ID_2 - $NAME_2 $ADDTLINFO_2 \n";} if( $NAME_3 ) {print MAIL "$QUANTITY_3 \R$PRICE_3 $ID_3 - $NAME_3 $ADDTLINFO_3 \n";} if( $NAME_4 ) {print MAIL "$QUANTITY_4 \R$PRICE_4 $ID_4 - $NAME_4 $ADDTLINFO_4 \n";} if( $NAME_5 ) {print MAIL "$QUANTITY_5 \R$PRICE_5 $ID_5 - $NAME_5 $ADDTLINFO_5 \n";} if( $NAME_6 ) {print MAIL "$QUANTITY_6 \R$PRICE_6 $ID_6 - $NAME_6 $ADDTLINFO_6 \n";} if( $NAME_7 ) {print MAIL "$QUANTITY_7 \R$PRICE_7 $ID_7 - $NAME_7 $ADDTLINFO_7 \n";} if( $NAME_8 ) {print MAIL "$QUANTITY_8 \R$PRICE_8 $ID_8 - $NAME_8 $ADDTLINFO_8 \n";} if( $NAME_9 ) {print MAIL "$QUANTITY_9 \R$PRICE_9 $ID_9 - $NAME_9 $ADDTLINFO_9 \n";} if( $NAME_10 ){print MAIL "$QUANTITY_10 \R$PRICE_10 $ID_10 - $NAME_10 $ADDTLINFO_10 \n";} if( $NAME_11 ){print MAIL "$QUANTITY_11 \R$PRICE_11 $ID_11 - $NAME_11 $ADDTLINFO_11 \n";} if( $NAME_12 ){print MAIL "$QUANTITY_12 \R$PRICE_12 $ID_12 - $NAME_12 $ADDTLINFO_12 \n";} if( $NAME_13 ){print MAIL "$QUANTITY_13 \R$PRICE_13 $ID_13 - $NAME_13 $ADDTLINFO_13 \n";} print MAIL "===================================================================== \n"; print MAIL "SUBTOTAL: $SUBTOTAL \n"; print MAIL "TOTAL: $TOTAL \n"; print MAIL "\n"; print MAIL "\n\n"; print MAIL "Comments: \n"; print MAIL "--------- \n"; print MAIL "$comment \n"; print MAIL " \n"; close MAIL; print "Content-type: text/html\n\n"; open (HEAD, $header); @LINES = <HEAD>; close HEAD; print @LINES; print "<h2>Thank you</h2>"; print "Thank you for your order."; print "Please contact us at $youremail if you have any problems questions or concerns. Thank U again for your support Kees Meyer."; print "<P>"; print "<A HREF=\"$returnpage\" rel="nofollow" target=_top>Return Home</A>"; print "<P>"; open (FOOT, $footer); @LINES = <FOOT>; close FOOT; print @LINES; exit; I am programatically trying to send multiple emails from within javascript code. I have read forums with different ideas and have not found a true solution. The problem I am having is as follows: - in one try - i am using window.location="mailto:"+emailList - this works great if it only needs to generate 1 email, but I am doing it in a loop. when it loops through the 2nd time, it does not create a 2nd email - in a 2nd try - i am using window.open("mailto:"+emailList - this does open multiple emails, but it also opens multiple windows. I am trying to find a way to either not have the windows open (only the multiple emails) or automatically close the extra windows. I am including my code below - note - the window.location try is listed, but commented out. Any help would be appreciated. if (emailListArray.length > jsNumEmails) { var j=1; for (var i=0; i<emailListArray.length; i++) { partialEmailList = partialEmailList + ";" + emailListArray[i]; if (j == jsNumEmails) { //window.location="mailto:"+partialEmailList; window.open("mailto:"+partialEmailList, "temp", "height=5, width=5, top=0, left=0"); j = 0; partialEmailList = ""; } //if j++; }//for } // if anything left in the partial list, then send that separately if (partialEmailList != "") { //window.location="mailto:"+partialEmailList; window.open("mailto:"+partialEmailList, "temp", "height=5, width=5, top=0, left=0"); } I want to send a simple email with just email & subject only when the user clicks a link that opens a pdf. I'm thinking javascript is the best way to do this but I have no idea how. I have googled it a bunch but most information is about getting an email when someone clicks a link you send in an email. I don't want that. This is on a website. I'm not sure if php would be better to use. Any help would be most appreciated!
Hi, I am new to Microsoft Outlook. I want to send a email using Microsoft Outlook. But that needs to send HTML email , I have tried for this but not getting the solution. I tried a lot by using <html> but it doesn't work. The code i have used is given below. Could you guys please help me out in this. Please make me know how can I send my email in html using Outlook Express ? .aspx.cs Quote: private void SendMail(DropDownList ddllist, TextBox txtTitle, TextBox txtSubSystem) { string email = string.Empty; string lastName = string.Empty; string title = string.Empty; string subsystem = string.Empty; string task = string.Empty; string issue_id = string.Empty; try { //DropDownList ddlAssignedTo = (DropDownList)fvIssue.FindControl("ddlAssignedTo"); string tb_assigned_to = ddllist.SelectedValue; task = Request.Url.OriginalString.ToString(); issue_id = Request.Url.OriginalString.ToString().Split('=')[2]; title = txtTitle.Text.Replace("'", " "); subsystem = txtSubSystem.Text.Replace("'", " "); if (tb_assigned_to != null) { if (tb_assigned_to.Equals(ConstValues.SCANNER_GROUP) || tb_assigned_to.Equals(ConstValues.SERVER_GROUP) || tb_assigned_to.Equals(ConstValues.TEST_GROUP)) { Session["emailTo"] = Util.GetGroupEmails(tb_assigned_to); } else { CdsContactBLL contact = new CdsContactBLL(); email = contact.EmailAddress(tb_assigned_to); if (email != string.Empty) Session["emailTo"] = email; else Session["emailTo"] = tb_assigned_to + "_DOES_EXIST_IN_CDS_CONTACT@datascanlp.com"; } } else Session["emailTo"] = "TO_EMAIL_GOES_HERE@test.com"; } catch (Exception ex) { Session["emailTo"] = "TO_EMAIL_GOES_HERE@test.com"; } InjectScript.Text = "<script type=\"text/javascript\">EmailIt('" + task + "','" + issue_id + "','" + Session["emailTo"].ToString() + "','" + title + "','" + subsystem + "')</script>"; } SendEmail.js Quote: // JScript File function EmailIt(task,issue_id,emailTO,strTitle,strsubsystem) { //win = window.open("...\\Issues\\HTMLPage3.htm"); var daReferrer = document.referrer; //var task = escape(document.URLUnencoded); //var issue_id = document.URLUnencoded.split("="); var email = emailTO; var title = strTitle; var subsystem = strsubsystem; var subject = "Issue Task number is " + issue_id + " - " + escape(title) ; var body_message = " Your Assigned Task is.%0D " + escape(task); body_message += escape("\n"); body_message += escape("\n"); body_message += " Sub System : " + escape(subsystem); body_message += escape("\n"); body_message += " Title : " + escape(title); body_message += escape("\n"); var mailto_link = 'mailto:'+email+'?subject='+subject+'&body='+body_message; win = window.open(mailto_link); if (win && win.open &&!win.closed) win.close(); //window.history.back(-1); } Regards, vimal kumar srivastava Madhepura,India I am trying to give uses the ability to email a web page in addition to print the pages but I cannot get the web page to post as the body of the email. Here is what the print function looks like: Code: function OnPrint() {
var contentWindow = GetContentFrame().contentWindow;
{
contentWindow.focus();
contentWindow.print();
}
}
and here is where I stand on the email the page(not just a link to the page) Code: function mailpage()
{
mail_str = "mailto:optilinksupport@seton.org?subject=Check out the " + document.title;
mail_str += "&body=I thought you might be interested in the " + document.title;
mail_str += ". You can view it at, " + location.href;
location.href = mail_str;
}
The above work great if I want to send a link to the page. How do I amend the above so that the the mail_str = contentWindow html? And do I need to do make other changes to format the email as html rather than text? Thank for a rookie! I have thought about using the standard email checker pattern but we have had problems in the past so looking to check if the string follows these simple rules. has no spaces, has a character/s at the start followed by an @ then has a character/s followed by a (dot) then another character/s i.e a@a.a aa@aa.aa aaa@aaaaaaaaa.aaa i am not sure how the standard pattern works but feel that it may be to complex which causes some email address to fail. Hi guys. I'm a mediocre website designer i know html , at JS i'm to noob to actualy make something of my own just Edit, i'm still learning and atm i'm working on a web project and I'm struggling to find a way to Filter email addresses to redirect my New Members to their e-mail provider, for example if they would register newmmember@hotmail.com to be forwarded to www.hotmail.com so they would login and activate their account, or if they enter @yahoo.com to be forwarded there . Can you please point out a few things i'm eager to learn how to Forward User to email provider after he creates his account . Or how can i forward email to URL inside my webpage , this could help me with another ideea i have, again this would have to be filtered @yahoo.com , @hotmail.com etc , to be forwarded to a local URL inside the site depending on what Email Provider they enter . I know this is a lot to ask but if you could point me out on the right path i would really appreciate all your help . Cheers
Here is the script I am using: PHP Code: <script type="text/javascript"> //set all the FCKeditor configuration here and pass it to the editable var oFCKeditor = new FCKeditor( 'editor1') ; oFCKeditor.BasePath = "fckeditor/" ; $('.myipwe').editable( { type: 'wysiwyg', editor: oFCKeditor, onSubmit:function submitData(content){ $.ajax({ type: "POST",url: "save.php?savepage=$page", data: {"content": content.current}, complete: function(){ }, //manage the complate if needed success: function(html){ }//get some data back to the screen if needed }); //close $.ajax( }, submit:'save', cancel:'cancel' }); </script> I'm not very familiar with javascript, but I want to get a variable called $page and then set it as the save.php?savepage=$page link. Anyone please tell me how to do it? I need to add onclick event to an element => myFunction(myVariable) but instead of the myVariable I need it's value to be set as an attr. As in: Code: <!html>
<head>
</head>
<body>
<input type="button" id="element" value="click me!">
<script type="text/javascript">
var myVariable = "myvalue";
document.getElementById('element').onclick = function () {
showIt(myVariable);
}
myVariable = "myvalue2";
function showIt(msg){
alert(msg);
}
</script>
</body>
</html>
Now i need the "click me!" input to alert "myvalue" and not "myvalue2". Can I send a key stroke to effectively click the back button? Cheers Daniel. Is it possible to send a checkbox value to the DB when checked and or unchecked. I mean when you Physically chage it's state. I am running a PHP project, the page I need this functionality on has a dynamically built table from the Database. What I need to do is send the value "1" to the DB if I check on one of the rows "Published" checkbox and vice versa, removing the value of 1 from the db and changing the state to unchecked. The reason I ask in the JS forum is that PHP is a server side language and as such may not submit the change in realtime. Any help and or suggestions is much appreciated. I'm trying to make a jQuery slider, and I want the user (the person who installs it on their site) to be able to specify options easily. I know the Nivo slider does it from within the $(document).ready() event, but I can't figure out how to do it that way. I want it to be like this: Code: <script>
$(document).ready(function() {
myFunction({
option1: 'value1',
option2: 'value2',
etc: 'etc'
});
});
</script>
But how do I recover this data so I can use it later? Hi all. I have a form that I am writing which needs to send information contained inside a textbox when the user presses the "Post Comment" button. I want it be sent as a parameter to the addComment() function. How can you do this??? I have been trying to figure it out for a while now but can't seem to get the syntax right. This is what my code looks like currently. If possible I would like this to work without referencing the name of this form. Code: <form method="post" name="form" action="" style="padding:0px; margin:0px;"> <textarea name="content" id="content" style="width:600px; height:114px; font-family:Verdana,Arial,Tahoma,Times New Roman; font-size:12px; border:1px #666 solid;" onFocus="this.value=''; this.onfocus=null;">Enter your comment...</textarea><br /> <input type="submit" value="Post Comment" id="v" name="submit" onclick="addComment(this.content.value);" /> <span id="wait"></span><span id="flash"></span> </form> Hello, In the following code i'm trying to check if the value of the text field is exist in the array. the problem that the function dose not accept the the value(node.value) from the text field. Code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Text Validation</title>
<script type="text/javascript" language="javascript">
Array.prototype.inArray = function (value)
{
// Returns true if the passed value is found in the
// array. Returns false if it is not.
alert(value);
var i;
for (i=0; i < this.length; i++)
{
if (this[i] == value)
{
return true;
}
}
return false;
};
function cal(xx)
{
var node_list = document.getElementsByTagName('input');
arr = new Array("");
for (var i = 0; i < node_list.length; i++)
{
var node = node_list[i];
///alert(node_list.length);
// alert(node.value);
arr.push(node.value)
}
alert(xx.length);
//var arr= new Array(1,2,3,4,5,6,7,8,9,10);
if(xx.length!=0)
{
if(arr.inArray(xx))
{
alert("Your value is found in the Array");
}
else
{
alert("Your value is not found in the Array");
}
}
}
</script>
</head>
<body>
<form id="text_validation" name="text_validation" action="" method="post">
<table width="600" border="1">
<tr>
<td><label for="abc_text_1" id="abc_text_1_lb">Text 1</label> </td>
<td>:</td>
<td><input type="text" id="abc_text_1" name="abc_text_1" onblur="return cal(this.value);" /></td>
</tr>
<tr>
<td><label for="cde_text_2" id="cde_text_2_lb">Text 2</label> </td>
<td>:</td>
<td><input type="text" id="cde_text_2" name="cde_text_2" value="abc" /></td>
</tr>
<tr>
<td><label for="fgh_text_3" id="fgh_text_3_lb">Text 3</label> </td>
<td>:</td>
<td><input type="text" id="fgh_text_3" name="fgh_text_3" value="abcaaaaa" onblur="return testvalidation(fgh_text_3);" /></td>
</tr>
<tr>
<td><label for="ijk_text_4" id="ijk_text_4_lb">Text 4</label> </td>
<td>:</td>
<td><input type="text" id="ijk_text_4" name="ijk_text_4" onblur="return testvalidation(ijk_text_4);" /></td>
</tr>
<tr>
<td><label for="lmn_text_5" id="lmn_text_5_lb">Text 5</label> </td>
<td>:</td>
<td><input type="text" id="lmn_text_5" name="lmn_text_5" onblur="return testvalidation(lmn_text_5);" /></td>
</tr>
<tr>
<td><label for="opq_text_6" id="opq_text_6_lb">Text 6</label> </td>
<td>:</td>
<td><input type="text" id="opq_text_6" name="opq_text_6" onblur="return testvalidation(opq_text_6);" /></td>
</tr>
<tr>
<td><label for="rst_text_7" id="rst_text_7_lb">Text 7</label> </td>
<td>:</td>
<td><input type="text" id="rst_text_7" name="rst_text_7" /></td>
</tr>
<tr>
<td><label for="uvw_text_8" id="uvw_text_8_lb">Text 8</label> </td>
<td>:</td>
<td><input type="text" id="uvw_text_8" name="uvw_text_8" /></td>
</tr>
<tr>
<td><label for="xyz_text_9" id="xyz_text_9_lb">Text 9</label> </td>
<td>:</td>
<td><input type="text" id="xyz_text_9" name="xyz_text_9" /></td>
</tr>
<tr>
<td><label for="klm_text_0" id="klm_text_0_lb">Text 10</label> </td>
<td>:</td>
<td><input type="text" id="klm_text_0" name="klm_text_0" value="10" /></td>
</tr>
</table>
</form>
</body>
</html>
Hey guys, I am wondering how to send text to a textarea when clicking on a link. Kinda like when clicking on a smiley or bbcode. I have a script, and it works, but only when the text to insert is on one line. Here is the code: Code: <script>
function sendtext(e, text) {
e.value += text
}
</script>
Code: <img onClick="sendtext(document.myform.mytextarea, ':)')" src="smiley.gif"> Now I want to use this little script to insert an e-mail template which I am getting from the database into my textarea. Only, it works when the template is on one line, I am using this for my php code, which works, so no need to worry about that: Code: <img onClick="sendtext(document.myform.mytextarea, '<? echo ("$row['mytemplate']"); ?>')" src="smiley.gif">
When the "$row['mytemplate'];" is as follows: Code: Hey, this works It works, but when it's as follows: Code: Hey, it does not work Then it doesn't. So whenever there's a linebreak, it does not work. My question is, can someone help me with this, or a similar script, so I can add a piece of text to my textarea which has linebreaks in it? I hope you understand what I'm asking Thanks in advance for the help. Hello, First off thank you for looking at my post. Please forgive me if I do something incorrectly here. I have never posted in a forum before. You are very kind to assist me in this problem. I wish to send the javascript calculated value in a form from one page to another page form. I just need the one value sent. The value is "answer: in the code below. I would like to send it to a form page called "answer.html" I am not a computer person, and I am doing this in frontpage. I do not know how to write java or anything, I just copied this from a free script site and am trying to use it. Thank you once again for your kindness and patience with me. Thanks to all you experts! Michael here is the code I have. --------------------------------------------- Code: <table cellspacing=0 width=427
height=1 bgcolor="#FFFFFF" style="border-collapse: collapse" cellpadding="0" border="0">
<tr>
<td width="634" nowrap height="1">
<script language="JavaScript">
function findcalculatorcalculate(form) {
a = form.debt.value - 0;
b = form.faith.value - 0;
d = a / b;
form.answer.value = Math.round (d);
}</script>
<p align="right" style="margin-left: 3; margin-right: 5"></p>
<form name="form" style=" margin-right: 5; padding-left: 4; padding-right: 4; padding-top: 1; padding-bottom: 1" action="--WEBBOT-SELF--" method="POST">
<p align="right">
<font style="font-size: 11pt; font-weight:700">Input amount <input class="regfont" size="13" type="text" name="debt"></font><span style="font-size: 11pt; font-weight:700"> <br>
divide by
</span><font style="font-size: 11pt; font-weight:700"><input class="regfont" size="6" type="text" name="faith"></font><br>
<b><font color="#FF0000" size="5"> </font></b><font style="font-size: 11pt"><input onclick="findcalculatorcalculate(this.form)" value="CLICK HERE TO CALCULATE" type="button" style="border-style:solid; border-width:2; font-weight: bold; font-family:Arial"><br>
<b>ANSWER</b>
</font></font>
<INPUT NAME="answer" SIZE="5" VALUE=""><br>
<INPUT TYPE="BUTTON" onClick="nextpage()" VALUE="Go to the next page"></p>
</p>
</form>
</td>
</tr>
</table>
<p align="right" style="margin-left: 3; margin-right: 5">I would like ANSWER
field to
pre populate the calculated amount on the second page titled "answer.html" THANK
YOU!</p>
------------------------ Thank you again for helping me in plain language because I do not have the skills that all of you do. Is it possible to send variables via link in javascript without altering the users window? Kind of like a redirect without actually redirecting the user. Hi there, I guess my question is very novice but I have to ask it. I can find lots of "form applications" on internet. But anytime I check them I cannot see any "send" button help. I mean I know that when I click it, it wont send the informations to my e-mail page. Because they don't show where to insert my email address there, in the example. So how can we make a form work for us, how can we arrange it to send the informations to our e-mail address? Do we need to use a php file for it? if yes, how? Regards and Thanks in advance Hello, I would like to know how can I send the selection from a dropdown from a webpage to another. In the first page where I have the dropdown list, I have this: Code: <td valign="top" align="left" nowrap width="90%">
<input name="time" style="width:100%" />
</td>
<td valign="top" align="left" nowrap width="50">
<select name="time2">
<option value="60">Minutes</option>
<option value="3600">Hour</option>
<option value="86400">Days</option>
</select>
</td>
In the second page, where I want this selection to be dispalyed, I created this code: Code: <td width="188" valign="top" align="left" nowrap> <SCRIPT LANGUAGE="JavaScript">document.write(window.opener.document.form.elements["time"].value + " " + window.opener.document.form.elements["time2"].value);</SCRIPT> </td> The issue I have with this is that the value dispalyed for the "time2" element is the actual attribute value (for instance 60) and not the actual value (for instance "Minutes"). If anyone have a clue what I'm doing wrong, I appreciate your help. Regards, |
|||||||