|
JavaScript - Need Assistance With Code For Preset Buttons To Add Text To A Form List.
I have been looking around for a while on google and have come accross a few things but still am unable to find the exact codes.
I am trying to have a page setup so that when the user clicks a button it will add preset text to a form box and keep the chronological order of buttons that are clicked. This is going to be used for my ambulance service to assist dispatch so basically i am looking for preset buttons that the dispatcher can click disp. and have the dispatch and time added to a list in the form box that can later be copied and emailed to our cell phones. Thanks for any help. Similar TutorialsI am delving into the coding world and while I understand the basic principle of cookies, conditional statements, arrays, etc... I am still learning how to properly implement them. Any asistance with the following situation would be greatly appreciated and help with my learning as I try to reverse engineer the logic. I have looked around the web and this forum with little success. If the situation below is too complicated, I would really appreciate even a shove in the right direction regarding the logic. ----------------- How could I show a preset counter which counts up from a preset, beginning number toward a preset, end number? I imagine the increment and speed is set be the difference between the two numbers and a timeframe. Assumptions: I would rather not set the increment but edit the end number to show a steady increase. As I update that number, the increment adapts dynamically. I would want the number/script to be useful, so it should not refresh to the beginning number on each page load (i.e. num=0). When a visitor comes to the page, it must seem like the counter has been steadily been increasing in their absence. Coke or Pesi did something similar one time regarding cans sold to date (doubt it was plugged into a DB somewhere but rather based on a steady sales figure) and it was pretty cool. All the best! I have a javascript code, which initiates via "onClick" when a user clicks on a checkbox. I downloaded the sample code, but the problem is is that I need the javascript to be initiated automatically, not when a user clicks on a checkbox. I would greatly appreciate it if anyone could help me resolve this issue. Below is a sample of the code I'm using. Thanks in advance. Code: <!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1.0, maximum-scale=1.0, user-scalable=no;" />
<meta http-equiv="Content-type" content="text/html; charset=utf-8">
<!-- iPad/iPhone specific css below, add after your main css >
<link rel="stylesheet" media="only screen and (max-device-width: 1024px)" href="ipad.css" type="text/css" />
<link rel="stylesheet" media="only screen and (max-device-width: 480px)" href="iphone.css" type="text/css" />
-->
<!-- If you application is targeting iOS BEFORE 4.0 you MUST put json2.js from http://www.JSON.org/json2.js into your www directory and include it here -->
<script type="text/javascript" charset="utf-8" src="phonegap.0.9.6.min.js"></script>
<script type="text/javascript" charset="utf-8" src="SAiOSAdPlugin.js"></script>
<script type="text/javascript" charset="utf-8">
// If you want to prevent dragging, uncomment this section
/*
function preventBehavior(e)
{
e.preventDefault();
};
document.addEventListener("touchmove", preventBehavior, false);
*/
var gLastAdLoadedDate = null;
var gTotalAdsLoaded = 0;
var gTimerId = null;
function onBodyLoad()
{
document.addEventListener("deviceready", onDeviceReady,false);
}
function onOrientationChange()
{
//alert(window.orientation);
}
/* When this function is called, PhoneGap has been initialized and is ready to roll */
function onDeviceReady()
{
// listen for orientation changes
window.addEventListener("orientationchange", window.plugins.iAdPlugin.orientationChanged, false);
// listen for the "iAdBannerViewDidLoadAdEvent" that is sent by the iAdPlugin
document.addEventListener("iAdBannerViewDidLoadAdEvent", iAdBannerViewDidLoadAdEventHandler, false);
// listen for the "iAdBannerViewDidFailToReceiveAdWithErrorEvent" that is sent by the iAdPlugin
document.addEventListener("iAdBannerViewDidFailToReceiveAdWithErrorEvent", iAdBannerViewDidFailToReceiveAdWithErrorEventHandler, false);
var adAtBottom = false;
setTimeout(function() {
window.plugins.iAdPlugin.prepare(adAtBottom); // by default, ad is at Top
}, 1000);
}
function iAdBannerViewDidFailToReceiveAdWithErrorEventHandler(evt)
{
alert(evt.error);
window.plugins.iAdPlugin.showAd(false);
var elem = document.getElementById("showAd");
elem.checked = false;
}
function iAdBannerViewDidLoadAdEventHandler(evt)
{
// if we got this event, a new ad is loaded
var elem = document.getElementById("lastAdLoaded");
gLastAdLoadedDate = new Date();
elem.innerHTML = gLastAdLoadedDate.toLocaleString();
elem = document.getElementById("showAd");
elem.disabled = false;
elem.checked = true;
window.plugins.iAdPlugin.showAd(true);
gTotalAdsLoaded++;
elem = document.getElementById("totalAdsLoaded");
elem.innerHTML = gTotalAdsLoaded.toString();
if (gTimerId) {
clearInterval(gTimerId);
}
gTimerId = setInterval(lastAdLoadedInterval, 1000);
}
function lastAdLoadedInterval()
{
var now = (new Date()).getTime();
var diff = now - gLastAdLoadedDate.getTime();
var elem = document.getElementById("lastAdLoaded");
var ms_in_a_year = 31449600000; /* 1000ms x 60s x 60m x 24hrs x 7d x 52w */
var ms_in_a_week = 604800000; /* 1000ms x 60s x 60m x 24hrs * 7d */
var ms_in_a_day = 86400000; /* 1000ms x 60s x 60m x 24hrs */
var ms_in_an_hour = 3600000; /* 1000ms x 60s x 60m */
var ms_in_a_minute = 60000; /* 1000ms x 60s */
var ms_in_a_second = 1000;
var milliseconds = Math.floor(diff);
var seconds = Math.floor(milliseconds / ms_in_a_second) % 60;
var minutes = Math.floor(milliseconds / ms_in_a_minute) % 60;
var hours = Math.floor(milliseconds / ms_in_an_hour) % 24;
var days = Math.floor(milliseconds / ms_in_a_day) % 7;
var weeks = Math.floor(milliseconds / ms_in_a_week) % 52;
var years = Math.floor(milliseconds / ms_in_a_year);
var caption = seconds + "s ago";
if (minutes > 0) {
caption = minutes + "m " + caption;
}
if (hours > 0) {
caption = hours + "h " + caption;
}
if (days > 0) {
caption = days + "d " + caption;
}
if (weeks > 0) {
caption = weeks + "w " + caption;
}
if (years > 0) {
caption = years + "yr " + caption;
}
elem.innerHTML = caption;
}
function showAdClicked(evt)
{
window.plugins.iAdPlugin.showAd(evt.checked);
}
</script>
</head>
<body style="margin:0; padding:0;border:1px solid blue;" onload="onBodyLoad()">
<span style="position:absolute; top:0;">
This is some text at the top of the webview.
</span>
<br /><br />
<form>
<input type="checkbox" id="showAd" name="showAd" disabled="disabled" onclick="showAdClicked(this);">Show iAd</input><br />
<br />
<span>New Ad Loaded: <span id="lastAdLoaded">Waiting.</span></span><br />
<span>Total Ads Loaded: <span id="totalAdsLoaded">None.</span></span>
</form>
<br />
<span style="position:absolute;bottom:0">
This is some text at the bottom of the webview.
</span>
</body>
</html>
The javascript (SoiOSADPLUGIN.JS) that is referenceD in this html page i also pasted below he Code: /**
* Constructor
*/
function SAiOSAdPlugin()
{
}
/**
* show - true to show the ad, false to hide the ad
*/
SAiOSAdPlugin.prototype.orientationChanged = function()
{
PhoneGap.exec("SAiOSAdPlugin.orientationChanged", window.orientation);
}
/**
* show - true to show the ad, false to hide the ad
*/
SAiOSAdPlugin.prototype.showAd = function(show)
{
PhoneGap.exec("SAiOSAdPlugin.showAd", show);
}
/**
* atBottom - true to put the ad at the bottom, false to put the ad at the top
*/
SAiOSAdPlugin.prototype.prepare = function(atBottom)
{
if (!atBottom) {
atBottom = false;
}
PhoneGap.exec("SAiOSAdPlugin.prepare", atBottom);
}
/**
* Install function
*/
SAiOSAdPlugin.install = function()
{
if ( !window.plugins )
window.plugins = {};
if ( !window.plugins.iAdPlugin )
window.plugins.iAdPlugin = new SAiOSAdPlugin();
}
/**
* Add to PhoneGap constructor
*/
PhoneGap.addConstructor(SAiOSAdPlugin.install);
I get the code to work when I click the checkbox, and it satisfies my needs, but having a checkbox toggle is not exactly ideal for this function. Is there anyway for me to have the "Onclick" function in this code changed to onload? Hello. I am rying to give same name to the radio button options and those in the drop down list. It should look like in the picture below. It is obvious that the input names of all options (of radio buttons & in the dropdown list) should be the same. E.g. <input name="find"> Please help me with code Thank you. Hi all, I have been struggling on a bit of code for a while now. I need to populate a second drop down list (Region) based upon the selection of the first (County). I have found a piece of code that works on its own and have adapted to suit my needs - see below. However, when I drop it into my main page the javascript is not working. It's because of the formObject but I just don't know enough to resolve this! Furthermore, I need the textboxes the user has already completed in the form to retain their value once the javascript kicks in as the completed form will submit to a database. This piece of code is working well . . . . Code: <?php
$link = mysql_connect('myhost', 'myusername', 'mypassword') or die('Could not connect: ' . mysql_error());
mysql_select_db('mydatabase') or die('Could not select database');
if(isset($_GET["County"]) && is_numeric($_GET["County"]))
{
$County = $_GET["County"];
}
if(isset($_GET["Region"]) && is_numeric($_GET["Region"]))
{
$Region = $_GET["Region"];
}
?>
<script language="JavaScript">
function autoSubmit()
{
var formObject = document.forms['theForm'];
formObject.submit();
}
</script>
<form name="theForm" method="get">
<!-- County SELECTION BASED ON city VALUE -->
<?php
?>
<select name="County" onChange="autoSubmit();">
<option value=''</option>
<?php
//POPULATE DROP DOWN MENU WITH COUNTRIES FROM A GIVEN city
$sql = "SELECT * FROM county_regions";
$counties = mysql_query($sql,$link);
while($row = mysql_fetch_array($counties))
{
echo ("<option value=\"$row[CountyID]\" " . ($County == $row["CountyID"]? " selected" : "") . ">$row[County]</option>");
}
?>
</select>
<?php
?>
<br><br>
<?php
if($County!= null && is_numeric($County))
{
?>
<select name="Region" onChange="autoSubmit();">
<?php
//POPULATE DROP DOWN MENU WITH RegionS FROM A GIVEN city, County
$sql = "SELECT * FROM county_regions WHERE CountyID = $County ";
$Regions = mysql_query($sql,$link);
while($row = mysql_fetch_array($Regions))
{
echo ("<option value=\"$row[CountyID]\" " . ($Region == $row["CountyID"]? " selected" : "") . ">$row[Region]</option>");
}
?>
</select>
<?php
}
?>
What follows is my form where the javascript is not working - edited quite a bit to save on space! Code:
<head>
<script language="JavaScript">
function autoSubmit()
{
var formObject = document.forms['subform'];
formObject.submit();
}
</script>
</head>
<form enctype="multipart/form-data" method="post" action="add_attraction01.php" FORM NAME="FormName">
<input type="hidden" name="MAX_FILE_SIZE" value="32768" />
<label for="Business_name">Business Name</label>
<input type="text" size="60" STYLE="color: #FFFFFF; font-family: Arial, Helvetica, sans-serif; font-weight: bold; font-size: 12px; background-color: #72A4D2;"
<id="Business_name" name="Business_name" maxlength=60/><font size="1" face="arial" color="red">Required field</font><br />
<label for="StreetAddress">Address</label>
<input type="text" size="60" rows="2" id="StreetAddress" name="StreetAddress" maxlength=120/><font size="1" face="arial" color="red">Required field</font><br />
<label for="Town">Town</label> <input type="text" size="25" id="Town" name="Town" maxlength=25/><font size="1" face="arial" color="red">Required field</font><br />
<?php
$link = mysql_connect('myhost', 'myusername', 'mypassword') or die('Could not connect: ' . mysql_error());
mysql_select_db('mydatabase') or die('Could not select database');
if(isset($_GET["County"]) && is_numeric($_GET["County"]))
{
$County = $_GET["County"];
}
if(isset($_GET["Region"]) && is_numeric($_GET["Region"]))
{
$Region = $_GET["Region"];
}
?>
<form name = "subform" method="get">
<select name="County" onChange="autoSubmit();">
<option value=''</option>
<?php
$sql = "SELECT * FROM county_regions";
$counties = mysql_query($sql,$link);
while($row = mysql_fetch_array($counties))
{
echo ("<option value=\"$row[CountyID]\" " . ($County == $row["CountyID"]? " selected" : "") . ">$row[County]</option>");
}
?>
</select>
<?php
?>
<br><br>
<?php
if($County!= null && is_numeric($County))
{
?>
<select name="Region" onChange="autoSubmit();">
<?php
$sql = "SELECT * FROM county_regions WHERE CountyID = $County ";
$Regions = mysql_query($sql,$link);
while($row = mysql_fetch_array($Regions))
{
echo ("<option value=\"$row[CountyID]\" " . ($Region == $row["CountyID"]? " selected" : "") . ">$row[Region]</option>");
}
?>
</select>
<?php
}
?>
<input type="text" size="20"id="Tel_No" name="Tel_No" maxlength=20 onkeypress="return isNumberKey(event)"/><font size="1" face="arial" color="red">Required field</font><br />
<br/>
<input type="submit" value="Submit your attraction" name="submit" onclick="return BothFieldsIdenticalCaseSensitive();"/>
</form>
</body>
</html>
It's probably obvious to you guys!! Thanks in advance for your help. Hi again For instance I want to display some announcements from an external text file on a predefined box, like lets say 140 wide and height scalable according to text. The texts would be some announcements from me, a few words. I want the text justified and with previous / next link, if possible. And when they navigate to another page, they will get a random message in that box. There are news tickers on the net, but I just want something simple like this, no scrolling, fading, etc.. Has anyone a clue how I can accomplish that? Thanks. Hey all- trying to get this bit of js to work properly. I'm close, but the issue is that if the window is opened at a size that is SMALLER than the original image, it wont scale down to the smaller size until i first make the window bigger, THEN size it down smaller. The image itself is big (its fashion photography so it needs to be high res) and the js sets the minimum width at 1070. Id like to have the image as big as possible and then on page load automatically drop down to as low as 1070px if the window size is small. Here is the js: Code: jQuery.noConflict();
function screenSize() {
var w, h;
w = (
window.innerWidth ?
window.innerWidth :
(
document.documentElement.clientWidth ?
document.documentElement.clientWidth :
document.body.offsetWidth));
h = (
window.innerHeight ?
window.innerHeight :
(
document.documentElement.clientHeight ?
document.documentElement.clientHeight :
document.body.offsetHeight));
return {w:w, h:h};
}
jQuery(document).ready(function ()
{
if( screenSize().w > 1070 )
{
document.getElementById('home-page-bg-image').style.width = screenSize().w + 'px';
}
})
jQuery(window).resize(function()
{
if( screenSize().w > 1070 )
{
document.getElementById('home-page-bg-image').style.width = screenSize().w + 'px';
}
});
let me know if you have any ideas Hello, I have a script that lets you add tasks to a task list and then you can click a button to sort them, but I cannot get the "Delete Selected Task" and "Delete All Tasks" buttons to work correctly. I will be eternally indebted to whoever can help me fix these two buttons. The code I am working on is posted below. Thank you for your time. [CODE] <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="content-type" content="text/html; charset=iso-8859-1" /> <title>To Do List</title> <script type="text/javascript"> /* <![CDATA[ */ function addTask() { if (document.forms[0].newtask.value == "") window.alert("You must enter a value in the New Task field."); else { if (document.forms[0].tasks.options.value == "tasks") document.forms[0].tasks.options[0] = null; var newTask = new Option(); newTask.value = document.forms[0].newtask.value; newTask.text = document.forms[0].newtask.value; var numTasks = document.forms[0].tasks.options.length; document.forms[0].tasks.options[numTasks] = newTask; document.forms[0].newtask.value = ""; } } function deleteTask() { var selectedTask = 0; var taskSelected = false; while (selectedTask < document.forms[0].tasks.length) { if (document.forms[0].tasks.options[selectedTask].selected == true) { taskSelected = true; break; } ++selectedTask; } if (taskSelected == true) document.forms[0].tasks.options[selectedTasks] = null; else window.alert("You must select a task in the list."); } function ascendingSort() { var newTasks = new Array(); for (var i =0; i < document.forms[0].tasks.length; ++i) { newTasks[i] = document.forms[0].tasks.options[i].value; } newTasks.sort(); for (var j =0; j < document.forms[0].tasks.length; ++j) { document.forms[0].tasks.options[j].value = newTasks[j]; document.forms[0].tasks.options[j].text = newTasks[j]; } } /* ]]> */ </script> </head> <body> <h1>To Do List</h1> <form action=""> <p>New Task <input type="text" size="68" name="newtask" /></p> <p><input type="button" value="Add Task" onclick="addTask()" style="width: 150px" /> <input type="button" value="Delete Selected Task" onclick="deleteTask()" style="width: 150px" /> <input type="button" value="Delete All Tasks" onclick="document.forms[0].task.options.length = 0;" style="width: 150px" /><br /> <input type="button" value="Ascending Sort" onclick="ascendingSort()" style="width: 150px" /> </p> <p><select name="tasks" size="10" style="width: 500px"> <option value="tasks">Tasks</option></select></p> </form> </body> </html> [CODE] Code: <script type="text/javascript" language="javascript">
function toggle()
{
var ele = document.getElementById("toggle");
var text = document.getElementById("display");
if(ele.style.display == "block")
{
ele.style.display = "none";
text.innerHTML = "Show";
}
else {
ele.style.display = "block";
text.innerHTML = "Hide";
}
}
</script>
Code: <a href="javascript:toggle();" id="display" style="color:#000000">Show</a> <div id="toggle" style="display:none">CONTENT</div> The above toggle code works perfectly. How can I edit the code to use buttons instead of text? In other words: How can I replace two different texts that say "Show" and "Hide" with two different buttons that say "Show" and "Hide"? Thanks. Hi guys, I have a form I am working on that has 4 text boxes in it, but I want to change it so that if a Radio button is selected it makes the 4th text box disappear, but still gives it a value of "0" when the form is submitted. Is this possible with Javascript? Here is what it looks like so far - Code: <FORM><table id='table_columns'>
<tr>
<td colspan="2" align="center">3 Columns <input name="3columns" type="radio" value="3columns"> 4 Columns <input name="4columns" type="radio" value="3columns"></td></tr><tr>
<td align="right"><p>Column 1</p></td>
<td align="left"><input class="txt" size="2" maxlength="2" name="WIDTH1" size="20" Title="Insert the desired width" value="25" /></td>
</tr>
<tr>
<td align="right"><p>Column 2</p></td>
<td align="left"><input class="txt" size="2" maxlength="2" name="WIDTH2" size="20" Title="Insert the desired width" value="25" /></td>
</tr>
<tr>
<td align="right"><p>Column 3</p></td>
<td align="left"><input class="txt" size="2" maxlength="2" name="WIDTH3" size="20" Title="Insert the desired width" value="25" /></td>
</tr>
<tr>
<td align="right"><p>Column 4</p></td>
<td align="left"><input class="txt" size="2" maxlength="2" name="WIDTH4" size="20" Title="Insert the desired width" value="25" /></td>
</tr>
</table>
<br />
<input type="button" value="Save" Title="Save these Settings" onClick="updateSettings('COLUMNS');" /></FORM>
If 3 Columns, WIDTH4 is not viewed and defaults to "0". If 4 Columns, all are visible and the number is then optional. Would love some assistance with this as my coding skills are pretty limited and my fingers have gone numb trying to google an answer. I am building an online store where the customer can select custom parts. I'm quite new to javascript, but I've managed to create a radio button list, where the price is added from each section. I would like a box to show all of the options selected, not just the sum total. I've included the text with value and used parseInt. I have been told I can use value.split(" "), but I don't really know how to go about doing that. I've been fiddling for hours now and don't seem to be able to get anywhere. I would also like to include a 3rd value, another number, and add that one in a separate calculation. E.g. For "50 5850ati1gb 56" I would like one calculation which adds 50 to the total, another calculation adding 56 to a different total and 5850ati1gb added to a list of all of the components. I am not very experienced with this, so don't be afraid to talk to me like I'm stupid! Thank you in advance. My code so far: Code: <head>
<script type="text/javascript">
function DisplayPrice(price){
var val1 = 0;
for( i = 0; i < document.form1.part.length; i++ ){
if( document.form1.part[i].checked == true ){
val1 = document.form1.part[i].value;
}
}
var val2 = 0;
for( i = 0; i < document.form2.part2.length; i++ ){
if( document.form2.part2[i].checked == true ){
val2 = document.form2.part2[i].value;
}
}
var val3 = 0;
for( i = 0; i < document.form3.part3.length; i++ ){
if( document.form3.part3[i].checked == true ){
val3 = document.form3.part3[i].value;
}
}
var sum=parseInt(val1) + parseInt(val2) + parseInt(val3);
document.getElementById('totalSum').value=sum;
}
</script>
</head>
<body>
<form name="form1" id="form1" runat="server">
<br>
<input id="rdo_1" type="radio" value="0 1.8ghz2xAMD" name="part" checked="checked" onclick="DisplayPrice(this.value);">1.8Ghz Dual Core AMD
<br>
<input id="rdo_2" type="radio" value="50 2ghz2xAMD" name="part" onclick="DisplayPrice(this.value);">2Ghz Dual Core AMD
<br>
</form>Choose your memory:<br />
<form name="form2" id="form2" runat="server">
<br>
<input id="rdo_1" type="radio" value="0 1333corsair1gb" name="part2" checked="checked" onclick="DisplayPrice(this.value);">1333 Corsair 1GB
<br>
<input id="rdo_2" type="radio" value="50 1333corsair2x1gb" name="part2" onclick="DisplayPrice(this.value);">1333 Corsair 2x1GB
<br>
</form>Choose your graphics card:<br />
<form name="form3" id="form3" runat="server">
<br />
<input id="rdo_1" type="radio" value="0 5830ATI1gb" name="part3" checked="checked" onclick="DisplayPrice(this.value);">1GB ATI 5830
<br />
<input id="rdo_2" type="radio" value="50 5850ATI1gb" name="part3" onclick="DisplayPrice(this.value);">1GB ATI 5850
<br />
<input id="rdo_3" type="radio" value="75 5870ATI1gb" name="part3" onclick="DisplayPrice(this.value);">1GB ATI 5870
<br />
</form>
</body>
Hi guys, I am working on my first validation form and although the Submit button works fine and puts me to the landing page, I don't get the alert, when nothing is checked. Please look at my code and help if you can. I really don't need anything fancy, just working Code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="keywords" content="social media survey, social media, media survey, survey, danish media, danish media survey" />
<meta name="description" content="This survey is a school project, not an actual research. It has been designed to figure out the connection between the gender of the Danish users and their knowledge and usage of social media." />
<script language="JavaScript" type="text/javascript"></script>
<script>
function isRadioButtonSelected(radioGrpName, errorMsg){
var radios = document.getElementsByName(radioGrpName);
var i;
for (i=0; i<radios.length; i=i+1 ){
if (radios[i].checked){
return true;
}
}
alert(errorMsg);
return false;
}
function validate(){
if(isRadioButtonSelected('gender', 'please select your gender')){
return true;
}
return false;
}
</script>
<title>The Social Media survey</title>
<style type="text/css">
<!--
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #8DC63F;
margin: 0;
padding: 0;
color: #000;
}
}
a img {
border: none;
}
.container {
width: 960px;
margin: 0 auto;
}
.header {
background: #FFF;
margin-top: 30px;
background-color:transparent;
background-image:url(header.jpg);
background-attachment: fixed;
background-position:left center;
background-repeat:no-repeat;
}
.content {
padding-left: 50px;
padding-right: 50px;
padding-top: 30px;
padding-bottom: 30px;
background-color:#E7EFB9;
font-family:Verdana, Geneva, sans-serif;
font-size: 13px;
}
.footer {
background: #FFF;
}
.fltrt {
float: right;
margin-left: 8px;
}
.fltlft {
float: left;
margin-right: 8px;
}
.clearfloat {
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
}
</style>
</head>
<body>
<div class="container">
<div class="header"><img src="header1.jpg" alt="The Social Media survey" width="960" height="175" /></div>
<div class="content">
<form id="page1" action="http://projects.knord.dk/interaction/saveforminfo.aspx" onsubmit="return validate(); method="post">
<input type="hidden" name="surveyid" value="igakotra" />
<input type="hidden" name="landingpage" value="http://www.google.com" />
<input type="hidden" name="usecookie" value="true" />
<h3>1. Choose your gender</h3>
<input type="radio" name="gender" value="male" id="male"/><label for "male">Male</label>
<input type="radio" name="gender" value="female" id="female"/><label for "female">Female</label><br /><br />
<input type="submit" name="submit" value="Submit"/>
</form>
</div>
<div class="footer"><a href="page1.html"><img src="1page.jpg" width="960" height="99" alt="1/6 pages" /></div>
</div>
</body>
</html>
I really need it asap... thanks guys, you're awesome I'm trying to set up a post preview to use before submitting a post. I need button 1 to open a pop-up with the preview of the post, and then button 2 should submit the post after the poster is satisfied. With the code below, when either button is clicked, each work as expected. The problem I'm having is, after the preview (OnButton1) is clicked, the submit button (OnButton2) will only open in a new tab, and not submit to the opened page from where it is being executed. This could lead to many double posts, if someone who's not sure what is going on, keeps clicking the submit button. I am wondering if there is a target "_self", or another method to make this work. I'm very happy with the preview window popping up, as it should, but will try any suggestions that are offered. function OnButton1() { var popUp = window.open ('','popUp','scrollbars=yes,resizable=yes,width=800, height=450'); document.form.action = "index.php?page=Preview" document.form.target = "popUp"; // Open in a new window document.form.preview(); // Submit the page return true; } function OnButton2() { document.form.action = "index.php?page=post" document.form.submit(); // Submit the page return true; } I have written some code below which hopefully changes teh value of the flag using JavaScript, I now want to request the value of the flag to see if it's a 1 or a 2? Code: <script>
function collatedata()
{
document.f1.flag.value=1;
document.f1.submit();
}
function generateinvoices()
{
document.f1.flag.value=2;
document.f1.submit();
}
</script>
<input type="hidden" name="flag" id="flag" />
<a href="javascript:collatedata();" class="button"><span>Collate</span></a>
<a href="javascript:generateinvoices();" class="button"><span>Generate</span></a>
Is it necessary (or advisable) to place <form> tags around input buttons? They seem to work fine either way. Code: <input type="button" value=" Home " onClick="parent.main.location='home.htm'"> Hello in "validateField" function radio is not exists and I don't know how can I add a validation rule for radio buttons. please help me . my code is attached. thank you Hi, I've got a form, and it contains a JS function to validate input (e.g. check for empty fields / valid email etc). I currently only have one submit button, which takes a user to a preview screen for the data they entered. I'd like to add a 2nd button to allow them to send the data right away, skipping the preview bit. However, I can't see how to have one form, with 2 buttons, and for each button to have a different destination, AND for each button to call the form validation JS. In fact, what I'm trying to do is much the same as this newthread page on this form, as it has the "Submit New Thread" and "Preview Post" buttons, each taking the user to a different page, each firing the form validation JS. I'd be grateful for any advice about how to do this. Thanks! Hi all, I have a form which has two radio buttons at the beginning which show and hide fields depending on what button is clicked: I want to adapt this js and html code so that when the page loads it checks whether one of the two radio buttons is clicked and depending on that it displays/hides the divs which are declared in the current function, at the moment it performs this when the user clicks one of the radio buttons but I want to perform it when the page is loaded and also when the user first enters the page I want the yes radio button to be selected and obviously hiding/showing the appropriate fields. Thanks for the help! Code:
function checkjob(jobvalue){
if(jobvalue!="yes") {
document.getElementById("nombre").style.display = "block";
document.getElementById("apellido").style.display = "block";
document.getElementById("empresa").style.display = "none";
document.getElementById("contacto").style.display = "none";
}else{
document.getElementById("nombre").style.display = "none";
document.getElementById("apellido").style.display = "none";
document.getElementById("empresa").style.display = "block";
document.getElementById("contacto").style.display = "block";
}
}
HTML
<div class="form_element">
<label >></label>
<div class="radio_element">
<input type="radio" value="yes" class="radio" id="yes" name="job" onchange="checkjob(this.value)" >
<span >yes</span>
</div>
<div class="radio_element">
<input type="radio" value="no" class="radio" id="no" name="job" onchange="checkjob(this.value)">
<span >no</span>
</div>
</div>
hello everyone Im new to javascript as well as to this forum, Im coming here for first class help that I can only get from skilled programmers like you. I have a html form that uses javascript for validation, this is an assignment that consists of a form that sells hard drives from three different manufacturers, more specifically the part im stuck on is where if a manufacturer hoes have a number in the number of drives textbox, javascript needs to check to see that one of the radio buttons in that row is checked, if no radio button is checked an alert is displayed, however when I do select a radio button I still get the alert I used a "if...else if...else" construction but my logic is not well structured and thereby I get those problems, I have included the code down below if anyone is interested in helping a newbie out, thanks Code: <html>
<head>
<style type="text/css">
.bold {font-weight:bold ; font-family:"comic sans ms"}
</style>
<script type="text/javascript">
function number_of_drives()
{
//checks that a value is entered for at least one drive's manufacturer
if(document.myform.drive1.value=="" && document.myform.drive2.value=="" && document.myform.drive3.value=="")
{
alert("please enter a quantity for the number of drives you wish to purchase from a manufacturer"); //if no value is entered in any the message is displayed
return; //no further calculation is done
}
else if(isNaN(document.myform.drive1.value || document.myform.drive2.value || document.myform.drive3.value ))//verifies that only numeric values were entered
{
alert("make sure you enter a numeric values for the 'number of drives' column");
return;
}
else
{
if(document.myform.drive1.value !="" && document.myform.western[0].checked==false && document.myform.western[1].checked==false && document.myform.western[2].checked==false)
alert("please select a size for the western digital drive");
else if(document.myform.drive2.value !="" && document.myform.maxtor[0].checked==false && document.myform.maxtor[1].checked==false && document.myform.maxtor[2].checked==false)
alert("please select a size for the maxtor digital drive");
else if(document.myform.drive2.value !="" && document.myform.quantum[0].checked==false && document.myform.quantum[].checked==false && document.myform.quantum[2].checked==false)
alert("please select a size for the quantum digital drive");
}
}
function check_radios()//function to check that a size is selected in the same row as the number of drives textbox//function to check that a size is selected in the same row as the number of drives textbox
{
if(document.myform.drive1!="" && document.myform.western[0].checked==false && document.myform.western[1].checked==false && document.myform.western[2].checked==false)// if drive1 textbox is not empty and no radio button is selected, a message will appear
{
alert("please select a size for the 'western digital' drive");
return;
}
else{return;}
if(document.myform.drive2!="" && document.myform.maxtor[0].checked==false && document.myform.maxtor[1].checked==false && document.myform.maxtor[2].checked==false)// if drive2 textbox is not empty and no radio button is selected, a message will appear
{
alert("please select a size for the 'maxtor' drive");
return;
}
else{return;}
if(document.myform.drive3!="" && document.myform.quantum[0].checked==false && document.myform.quantum[1].checked==false && document.myform.quantum[2].checked==false) // if drive2 textbox is not empty and no radio button is selected, a message will appear
{
alert("please select a size for the 'quantum' drive");
return;
}
else{return;}
}
function clear_form()
{
document.myform.western[0].value=="";
document.myform.western[1].value=="";
document.myform.western[2].value=="";
document.myform.maxtor[0].value=="";
document.myform.maxtor[1].value=="";
document.myform.maxtor[2].value=="";
document.myform.quantum[0].value=="";
document.myform.quantum[1].value=="";
document.myform.quantum[2].value=="";
document.myform.drive1.value=="";
document.myform.drive2.value=="";
document.myform.drive3.value=="";
document.myform.size1.value=="";
document.myform.size2.value=="";
document.myform.size3.value=="";
document.myform.totalsize.value=="";
document.myform.totalcost.value=="";
document.myform.discount.value=="";
document.myform.grandtotal.value=="";
}
</script>
<title></title>
</head>
<body>
<form name="myform">
<table align="center" border="1" width="80%">
<tr style="font-family:'comic sans ms'; font-size:24pt"><td align="center" colspan="6">Rupert's Hard Drive Emporium</td></tr>
<tr><td class="bold" valign="middle" align="center" rowspan="2">Manufacturer</td><td colspan="3" align="center" class="bold">Drive Size</td><td rowspan="2" class="bold">Number of Drivers</td><td rowspan="2" class="bold">Number of GB</td></tr>
<tr><td class="bold">500 Gigabytes</td><td class="bold">1 Terabyte</td><td class="bold">2 Terabytes</td></tr>
<tr><td>Western Digital ($0.12/GB)</td><td align="center"><INPUT TYPE=RADIO NAME="western" value="500" /></td><td align="center"><INPUT TYPE=RADIO NAME="western" value="1024"/></td><td align="center"><INPUT TYPE=RADIO NAME="western" value="2048"/></td><td align="center"><input type="text" name="drive1"/></td><td align="center"><input type="text" name="size1"/></td></tr>
<tr><td>Maxtor ($0.16/GB)</td><td align="center"><INPUT TYPE=RADIO NAME="maxtor" value="500"/></td><td align="center"><INPUT TYPE=RADIO NAME="maxtor" value="1024"/></td><td align="center"><INPUT TYPE=RADIO NAME="maxtor" value="2048"/></td><td align="center"><input type="text" name="drive2"/></td><td align="center"><input type="text" name="size2"/></td></tr>
<tr><td>Quantum ($0.09/GB)</td><td align="center"><INPUT TYPE=RADIO NAME="quantum" value="500"/></td><td align="center"><INPUT TYPE=RADIO NAME="quantum" value="1024"/></td><td align="center"><INPUT TYPE=RADIO NAME="quantum" value="2048"/></td><td align="center"><input type="text" name="drive3"/></td><td align="center"><input type="text" name="size3"/></td></tr>
<tr><td rowspan="4" align="center"><img src="hardisk.jpg" height="120pt" width="90pt"/></td><td colspan="3" align="right">Total Gigabytes Purchased</td><td align="center" colspan="2"><input type="text" name="totalsize" readonly="true"/></td></tr>
<tr><td colspan="3" align="right">Total Cost of Drives</td><td align="center" colspan="2"><input type="text" name="totalcost" readonly="true"/></td></tr>
<tr><td colspan="3" align="right">Discount</td><td align="center" colspan="2"><input type="text" name="discount" readonly="true"/></td></tr>
<tr><td colspan="3" align="right">Grand Total</td><td align="center" colspan="2"><input type="text" name="grandtotal" readonly="true"/></td></tr>
<tr><td align="center"><input type="submit" value="calculate" onclick="number_of_drives()"/></td><td align="center" colspan="5"><input type="submit" value="clear the form" onclick="clear_form()"/></td></tr>
</table>
</form>
</body>
</html>
|
|||||||