|
JavaScript - Resetting/clearing Form Data, Focusing Radio Button
Hello all.
Complete newbie to this and to be quite honest, completely out of my depth. Ok, I have the following set up on my page - the page essentially uses three different search methods to bring back data in a gridview. 1. A cascading drop down list (ddlBuyer, ddlSub, ddlProd) and an associated radio button radBuyer. 2. An autocomplete textbox (tbxProdAC) that sources product information and an associated radio button (radProd) 3. A text box whereby users specify the number of products they wish to see and (txtHowMany) a subsequent sub category radio button list that breaks the products down further (radTopx) What I would like to do is essentially make the page so that a user can only user one of the above methods and the radio is focused according to what the user first specifies. For example, if they wish to use the ddl method, they should click ddlBuyer, ddlSub and ddlProd and the focus is placed upon the radBuyer. Along side of this, any information that may have been entered into tbxProdAC or txtHowMany is cleared. Alternatviely, should a user use the drop down method then wish to use the third method specified above, once a user clicks in txtHowMany, the ddl should revert back to their original values. I would like to achieve this in the c# code behind and I currently have the following code on my page load event/ I have got to the point where I am going round in circles (mainly because I don't know what I am doing!) so I would appreciate a few pointers. Code: ddlProd.Attributes.Add("onchange", "return SetRadioFocus('" + radBuyer.ClientID + "');");
radTopx.Attributes.Add("onclick", "return SetRadioFocus('" + radTopx.SelectedItem + "');");
tbxProdAC.Attributes.Add("onclick", "return SetRadioFocus('" + radProd.ClientID + "');");
ClientScript.RegisterClientScriptBlock(this.GetType(), "MyScript", @"
function SetRadioFocus(target)
{
document.getElementById(target).checked = true;
}"
, true);
If someone can help me, I would be extremely grateful and it would save me from smashing my head further into my desk. Please excuse my ignorance, brand spanking new to this and feeling more than a little thick. Similar TutorialsSo I need some help with figuring out how to reset both my text boxes when I click a different radio button so that I can give another value in the textbox area. I am trying to do it without a reset button. Any helpful ideas? I am just confused with the process of resetting the values of both the text boxes in the code.Hmmm......lol I feel like the answer is to put it inline in the <input> tag... Code: <body>
<div id="content">
<h1>Convert temperature</h1>
<input type="radio" name="conversion_type" id="to_celcius" onclick="document.getElementById('degrees_celcius').disabled=this.checked;" />From Fahrenheit to Celcius<br />
<input type="radio" name="conversion_type" id="to_fahrenheit" onclick="document.getElementById('degrees_fahrenheit').disabled=this.checked;" />From Celcius to Fahrenheit<br />
<br />
<label>Degrees Fahrenheit:</label>
<input type="text" id="degrees_fahrenheit" class="disabled" /><br />
<label>Degrees Celcius:</label>
<input type="text" id="degrees_celcius" class="disabled"/><br />
<br />
<input type="button" id="convert" value="Convert" /><br />
<br />
</div>
</body>
I have a page where a user can select (via check boxes) several categories. Each category is related to a set of possible options (radio buttons) that have numeric values. When one of the options (radio button) is selected, the amount will appear in a text box (input type="text"). The numeric value in the text box will update depending on what category options are selected. However, when the checkbox is deselected, the radio boxes in the <div> are not displayed and I need to remove (reset) the radio button values from the value seen in the text box. Here are some snippets to hopefully expound on what I would like to do. Code: <script type="text/javascript">
var amountNotice = 0;
function notice(options)
{
amountNotice = parseInt(options);
calculateTotal();
}
function calculateTotal()
{
totalAmount = amountNotice;
document.getElementById("total").value = totalAmount.toFixed(2);
}
function toggle(chkbox, group, associatedValues)
{
var visSetting;
if (chkbox.checked == true)
document.getElementById(group).style.display = "inline";
else
{
document.getElementById(group).style.display = "none";
uncheckRadio(associatedValues);
}
document.getElementById(group).style.display = visSetting;
}
function uncheckRadio(associatedValues)
{
for(var i = 0; i < document.getElementById(associatedValues).length; i++)
{
if (associatedValues[i].checked == true)
associatedValues[i].checked == false;
}
calculateTotal();
}
</script>
<style type="text/css">
#groupNotice {display: none}
</script>
.
.
<input type="button" onClick="calculateTotal()" value="Calculate"><br>
<div id="groupNotice">
<b>Required Notice</b>:
<input type="radio" name="Note" onClick="notice(this.value)" value="0"> None
<input type="radio" name="Note" onClick="notice(this.value)" value="2"> Prior Day ($2)
<input type="radio" name="Note" onClick="notice(this.value)" value="2"> Prior Call ($2)<br>
</div>
<form name="CostEstimate" method="post" action="calculator.php">
<input type="checkbox" onclick="toggle(this, 'groupNotice', 'Note'); display('groupNotice','inline')" name="Notice" value=""> Notice
</form>
Everything works except for my uncheckRadio function - not sure if I am identifying the elements correctly, or if I need a totally new approach. My thinking is that the function must be accessed by the checkbox onClick call. Previously I had tried calling uncheckRadio from the notice function before I recognized is was not an appropriate location. Any assistance is greatly appreciated. - c Hey guys, First shot at JS so please be gentle! I'm trying to get this script to clear the default value of my input elements on focus. It works well the first time, however, if a user inputs some fresh text, selects something else, then selects the same input element again, it will clear the text they entered. Make sense? Here's the script (thanks in advance!!): Code: <script language="JavaScript">
function clickFocus(input){
input.className = 'focus';
if (input.value = input.defaultValue){
input.value = '';
}
}
function unFocus(input){
input.className = 'entered';
if (input.value == ''){
input.value = input.defaultValue;
input.className = 'normal'
}
}
</script>
<form action="confirmation.php" method="post" enctype="multipart/form-data" name="form" id="form" onsubmit="return checkForm(this)">
<input type="text" name="name" value="Name" onfocus="clickFocus(this)" onblur="unFocus(this)" />
<input type="text" name="email" value="Email" onfocus="clickFocus(this)" onblur="unFocus(this)" />
<input type="text" name="subject" value="Subject" onfocus="clickFocus(this)" onblur="unFocus(this)" />
<textarea type="text" name="message" onfocus="clickFocus(this)" onblur="unFocus(this)" rows="5">Message</textarea>
<input class="submit" name="submit"type="submit" value="Send Message" />
</form>
I am trying to build a page that has a form on it with three questions, each having two answers via radio button. When the user hits submit, depending on their answers to the three questions, it redirects them to a different page. This is all I have so far and am stuck, I dont know much JS. <script type="text/javascript"> function whereTo () { if ((Goods==true) && (Direct==true) && (SoleSource==true)) { window.location = "http://www.somesite/page1"; } if ((Goods==true) && (Direct==true) && (NetworkID==true) && (Competed==true)) { window.location = "http://www.somesite/page2"; } if ((Goods==true) && (Indirect==true) && (CostCenter==true) && (SoleSource==true)) { window.location = "http://www.somesite/page3"; } if ((Goods==true) && (Direct==true) && (NetworkID==true) && (SoleSource==true)) { window.location = "http://www.somesite/page4"; } if ((Goods==true) && (Indirect==true) && (CostCenter==true) && (Competed==true)) { window.location = "http://www.somesite/page5"; } if ((Goods==true) && (Direct==true) && (NetworkID==true) && (Competed==true)) { window.location = "http://www.somesite/page6"; } } </script> The form (it only has the inputs not the questions, i know its not setup properly, just wanted to show the inputs): <form> <input type="radio" id="Goods" name="good" /> Goods<br /><input type="radio" id="Services" name="Services" /> Services <input type="radio" id="Direct" name="good" /> Direct<br /><input type="radio" id="Indirect" name="Indirect" /> Indirect <input type="radio" id="CostCenter" name="CostCenter" /> Cost Center<br /><br /><input type="radio" id="NetworkID" name="NetworkID" /> Network ID <input type="radio" id="SoleSource" name="order" /> Sole Source<br /><input type="radio" id="Competed" name="order" /> Can Be Competed</td> <input alt="Submit" onclick=" return whereTo()" /> </form> I have 4 rows in a table. Each row consist of 4 radio buttons. Each radio button per row has different values in it but has the same name (group) ex: <input type="radio" name="a" value="1"> <input type="radio" name="a" value="2"> <input type="radio" name="a" value="3"> <input type="radio" name="a" value="4"> <input type="radio" name="b" value="1"> <input type="radio" name="b" value="2"> <input type="radio" name="b" value="3"> <input type="radio" name="b" value="4"> and so on.. If I click radio button A with value 2, I want to output the total at the bottom as "2".. Also, if I click radio button B with value 3, I want to output the total of A and B as 5 and so on.. How can I automatically calculate the answer based on which radio button was click? update: I got my answer from this site: http://stackoverflow.com/questions/1...s-using-jquery I am a complete JS noob. I have been googling for hours trying to find a way to implement what I think is a simple thing - but alas my deadline is here, and I need to solve this and seek guidance from courteous experts! In a nutshell I have a simple form that has radio buttons: Code: <p><input id="amount" name="amount" type="radio" value="125" />$125</p> <p><input id="amount" name="amount" type="radio" value="75" />$75</p> <p><input id="amount" name="amount" type="radio" value="50" />$50</p> <p><input id="amount" name="amount" type="radio" value="25" />$25</p> <p><input id="amount" name="amount" type="radio" value="other" /><input id="other_amount" name="other_amount" type="text" maxlength="7" style="width:100px;" /> Other ($10 minimum donation)</p> The point of the form is to assign the value to "amount" for sending on to a paypal form. The problem is, I need the value of "amount" to change (be assigned) if they chose "other". To take the value from the text input box "other_amount" and assign it to "amount" but only if they chose the 5th radio button. I have some JS that I hacked together that checks to see if they chose the 5th radio button. attempts to assign the "other amount" to "amount" and then pops up an alert (only so I know the script is pushing the right value - wont be needed when complete.) However, Even though the alert pops up with the proper "other_amount" as if it has been assigned properly, the data is not sent on properly I presume, as it is the only aspect of the paypal donation amount form that is not working or providing the next page with the right "amount" pre-determined. Code: <script type="text/javascript">
<!--
function get_radio_value()
{
if (document.donation.amount[4].checked)
{
document.getElementById('amount').value = document.donation.other_amount.value;
alert(document.getElementById('amount').value);
}
}
//-->
</script>
Help please! Many thanks in advance! Deadline agh! Hope someone can help. i have this script I found that i think does what i am looking for but i cant seem to get it to work.I think I am just overlooking something. I have a group of radio buttons in a form on a page and i am trying to get the value and image attached to the chosen radio button to pass to another form on another page.here is what i have so far. form 1 page named - giftcards.html Code: <form action="GIFTCERTIFICATES.html" name="giftcardstyle"> <input name="giftcardstocknumber" type="radio" value="BBA - 006"/> <img src="GIFTCARDS/004 BASIC4.jpg" alt="bba-006" style="width: 150px; height: 100px"> form 2 new page named - giftcertificates.html Code: <SCRIPT LANGUAGE="JavaScript" type="text/javascript"><!--
function getParm(string,parm) {
// returns value of parm from string
var startPos = string.indexOf(parm + "=");
if (startPos > -1) {
startPos = startPos + parm.length + 1;
var endPos = string.indexOf("&",startPos);
if (endPos == -1)
endPos = string.length;
return unescape(string.substring(startPos,endPos));
}
return '';
}
var passed = location.search.substring(1);
document.f1.giftcardstocknumber.value = getParm(passed,'giftcardstocknumber');
document.formname.otherfield.value = getParm(passed,'otherfield');
//--></SCRIPT>
<input type="text" name="giftcardstocknumber"/>
<img src="" style="width: 150px; height: 100px"/>
Hello all, I have 2 radio buttons update bsc value update mnr value when user selects update mnr value, two more radio buttons should appear. I have mnr value I do not have mnr value. On selecing I do not have mnr value im submitting the form and enabling the user to select values from dropdown. ( not shown in the code as it is a coldfusion code.). On submit I am not able to still keep the 'but2', and 'my_select3' elements disabled. Please advice. I have been working on this since quite sometime. <script language="JavaScript"> function makeChoice() { var obj1 = document.getElementById('box1') var obj2 = document.getElementById('box2') if (document.getElementById('but1').checked) { obj2.setAttribute('readOnly','readonly'); obj1.removeAttribute('readOnly'); document.getElementById('but1').disabled=true; document.getElementById('but2').disabled=true; } else if (document.getElementById('but2').checked) { obj1.setAttribute('readOnly','readonly'); obj2.removeAttribute('readOnly'); document.getElementById('but2').disabled=true; document.getElementById('but1').disabled=true; } } </script> <script type="text/javascript"> function showSelect() { if (document.getElementById('but2').checked) { document.getElementById('but2').disabled=true; } } </script> <script type="text/javascript"> function showSelect1() { if (document.getElementById('but2').checked) { document.myform.submit(); document.getElementById('but2').disabled=true document.getElementById('my_select3').disabled=true } } </script> <td><input type="radio" id="but1" name="vals" onclick="makeChoice()"></td> <td>Update BSC Value </td> <tr> <td><input type="radio" id="but2" name="vals" onclick="makeChoice();showSelect();" ></td> <td>Update MNR Value </td> <td> <input id="my_select1" class="show" type="radio" name="my_select1" onclick="this.myform['my_select1'].disabled=true"></td> <td> I have a Position Number </td> <td><input id="my_select3" class="show" type="radio" name="my_select3" onclick="showSelect1();"></td> <td> I do not have a Position Number </td> Hello, I am pretty new at javascript and I am trying to create a payment form that has both fields for payment by check and payment by credit card. I am wondering how I would go about having a radio button that asks the user how they would like to pay "credit card" or "check" and depending on which one they pick it shows the fields pertaining to that type of payment. the fields in the form look like this: Credit Card Fields: Code: <select name="card_type" size="1"> <option value="">- Card Type - </option> <option value="1">Visa</option> <option value="2">Mastercard</option> <option value="3">Discover</option> <option value="4">American Express</option> </select> Expiration Date<input type="text" name="exp_date" value="" id="exp_date"> CVC Code<input type="text" name="cvc" value="" id="cvc"> Card Number<input type="text" name="card_number" value="" id="card_number"> Amount On Credit Card<input type="text" name="card_amount" value="" id="card_amount"> Name On Card<input type="text" name="name_on_card" value="" id="name_on_card"> Billing Address<input type="text" name="billing_address" value="" id="billing_address"> Billing City<input type="text" name="billing_city" value="" id="billing_city"> <select name="billing_state" size="1"> <option value="">- Billing State -</option> </select> Check Fields: Code: Name (as printed on check)<input type="text" name="check_name" value="" id="check_name"> Address On Check<input type="text" name="check_address" value="" id="check_address"> Amount On Check<input type="text" name="check_amount" value="" id="check_amount"> Checking Account Number<input type="text" name="check_acc_number" value="" id="check_acc_number"> Routing Number<input type="text" name="routing_number" value="" id="routing_number"> Check Number<input type="text" name="check_number" value="" id="check_number"> I'm only validating one (Consent) radio button with this code but i need to validate multiple different questions/buttons. Code: <script>
function getRBtnName(GrpName) {
var sel = document.getElementsByName(GrpName);
var fnd = -1;
var str = '';
for (var i=0; i<sel.length; i++) {
if (sel[i].checked == true) { str = sel[i].value; fnd = i; }
}
return fnd;
}
function checkForm() {
var chosen = getRBtnName('Consent');
if (chosen < 0) {
alert( "Please choose one answer when you are asked to select a number." );
return false;
} else { return true; }
}
</script>
<form action="congratulations_aff.php" method="post" name="congratulations_aff" onSubmit="return checkForm()">
<table border="0" cellspacing="1" cellpadding="0">
<tr>
<td colspan="3">I consent to providing my electronic signature.</p></td>
</tr>
<tr>
<td colspan="3" valign="top">
<input type="radio" name="Consent" value="Y" />
Yes
<input type="radio" name="Consent" value="N" />
No
<table border="0" cellspacing="1" cellpadding="0">
<tr>
<td>I consent to electronic receipt of my information reporting documentation.</td>
</tr>
<tr>
<td valign="top">
<input type="radio" name="Consent1099YesNo" value="Y" />
Yes
<input type="radio" name="Consent1099YesNo" value="N" />
No</td>
</tr>
<tr>
<td valign="top">
For tax purposes are you a U.S. citizen, U.S. resident, U.S. partnership, or U.S. corporation?
<input type="radio" name="USPersonYesNo" value="Y" />
Yes
<input type="radio" name="USPersonYesNo" value="N" />
No</tr>
</table>
<input type="submit" value="submit" value="Submit" />
</form>
Any help would be greatly appreciated. I am having trouble with figuring a way to set my loop up to reset values of the different coin values. Example, when I put in 78, and click calculate, it tells you how much of each coin would be given back. My problem is that I set it up and run it, but when I put different values in back to back to calculate, some of the fields don't reset. I just need some ideas or logic behind what I need to do. Code: var change_out = function(){
do {
var money = document.getElementById("cents").value;
if (money >= 25)
{
var quarters = parseInt(money / 25);
var foo = parseInt(money - (quarters * 25));
document.getElementById("quarters").value = quarters;
if (foo >= 10)
{
var left = parseInt(foo / 10);
var wow = parseInt(foo - (left * 10));
document.getElementById("dimes").value = left;
if(wow==0)return;
if (wow >= 5)
{
var dumb = parseInt(wow / 5);
var pop = parseInt(wow - (dumb * 5));
document.getElementById("nickels").value = dumb;
document.getElementById("pennies").value = pop;
}else{document.getElementById("pennies").value = wow;}
}else if (foo >= 5){
var dumb = parseInt(foo / 5);
var pop = parseInt(foo - (dumb * 5));
document.getElementById("nickels").value = dumb;
document.getElementById("pennies").value = pop;
}else{document.getElementById("pennies").value = foo;}
}else if (money >= 10){
var left = parseInt(money / 10);
var wow = parseInt(money - (left * 10));
document.getElementById("dimes").value = left;
if (wow > 5){
var dumb = parseInt(wow / 5);
var pop = parseInt(wow - (dumb * 5));
document.getElementById("nickels").value = dumb;
document.getElementById("pennies").value = pop;
document.getElementById("quarters").value = "";
}else{document.getElementById("pennies").value = wow;}
}else if (money >= 5){
var dumb = parseInt(money / 5);
var pop = parseInt(money - (dumb * 5));
document.getElementById("nickels").value = dumb;
document.getElementById("pennies").value = pop;
document.getElementById("quarters").value = "";
document.getElementById("dimes").value = "";
}else{
document.getElementById("pennies").value = money;
document.getElementById("quarters").value = "";
document.getElementById("dimes").value = "";
document.getElementById("nickels").value = "";
}
}while(isNaN(money))}
Greetings! I'm trying to disable some form elements using the onclick from a radio input element. It ain't working so great! I googled around and finally scraped together some code that in theory 'I' think should work. I'm no javascript guru! It has to be some tiny tiny thing I'm missing. Here's my code and mind you this is a project in the making! I still have along way to go! Thanks for you time and help! Code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<title>Empty Page</title>
<script type='text/javascript'>
function setReadOnly(obj)
{
if(obj.value == "1")
{
document.shiftreport.artprogs.disabled = true;
document.shiftreport.artprog_stat.disabled = true;
} else {
document.shiftreport.icprogs.disabled = true;
document.shiftreport.icprog_stat.disabled = true;
}
}
</script>
</head>
<body>
<?php
include_once('form_input_functions.php');
$artprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$artprog_wfls = array('no_job' => '------- select a job -------',
'ARTPROG/WFL/DAILY/BATCH' => 'ARTPROG/WFL/DAILY/BATCH',
'ARTPROG/WFL/OPERATIONS/IMAGE' => 'ARTPROG/WFL/OPERATIONS/IMAGE',
'ARTPROG/WFL/WKLY/BATCH' => 'ARTPROG/WFL/WKLY/BATCH',
'ARTPROG/WFL/DAILY/CLAIMS' => 'ARTPROG/WFL/DAILY/CLAIMS'
);
$bllyprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$bllyprog_wfls = array('no_job' => '------- select a job -------',
'BLLYPROG/WFL/DAILY/SISCHEDPAY' => 'BLLYPROG/WFL/DAILY/SISCHEDPAY',
'BLLYPROG/WFL/DAILY/REPORTS' => 'BLLYPROG/WFL/DAILY/REPORTS',
'BLLYPROG/WFL/WKLY/REPORTS/GYPSUM' => 'BLLYPROG/WFL/WKLY/REPORTS/GYPSUM',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP',
'$UTIL/O/AUDIT/CLOSE/BLLY' => '$UTIL/O/AUDIT/CLOSE/BLLY',
'DATASIWH/EXTRACTALL/DAILY/AUD/WFL' => 'DATASIWH/EXTRACTALL/DAILY/AUD/WFL',
);
$sbwcprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$sbwcprog_wfls = array('no_job' => '------- select a job -------',
'WORKPROG/WFL/DAILY/WAREHOUSE' => 'WORKPROG/WFL/DAILY/WAREHOUSE',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP',
'$UTIL/O/AUDIT/CLOSE/WORKCOMP' => '$UTIL/O/AUDIT/CLOSE/WORKCOMP'
);
$tcsprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$tcsprog_wfls = array ('no_job' => '------- select a job -------',
'TCS/WFL/DAILY/BATCH' => 'TCS/WFL/DAILY/BATCH',
'BLPROG/WFL/COPY/REMOVE/GLCHECKS' => 'BLPROG/WFL/COPY/REMOVE/GLCHECKS'
);
$icprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$icprog_wfls = array ('no_job' => '------- select a job -------',
'BLPROG/WFL/DAILY/INDCONT' => 'BLPROG/WFL/DAILY/INDCONT',
'INDCON/WFL/PRINT/IDCARDS' => 'INDCON/WFL/PRINT/IDCARDS',
'BLPROG/WFL/BATCH/NEWYORK/STATE-REPORT' => 'BLPROG/WFL/BATCH/NEWYORK/STATE-REPORT'
);
$truckprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$truckprog_wfls = array('no_job' => '------- select a job -------',
'TRUCKPROG/WFL/DAILY/TKINTMARSH' => 'TRUCKPROG/WFL/DAILY/TKINTMARSH',
'TRUCKPROG/WFL/DAILY/TKINTERNET' => 'TRUCKPROG/WFL/DAILY/TKINTERNET',
'TRUCKPROG/WFL/DAILY/BATCH' => 'TRUCKPROG/WFL/DAILY/BATCH',
'TRUCKPROG/WFL/DAILY/TKSCHEDPAY' => 'TRUCKPROG/WFL/DAILY/TKSCHEDPAY',
'TRUCKPROG/WFL/DAILY/REPORTS' => 'TRUCKPROG/WFL/DAILY/REPORTS',
'BLPROG/WFL/DAILY/CLAIMS' => 'BLPROG/WFL/DAILY/CLAIMS',
'TRUCKPROG/WFL/DAILY/AUDIT/PREMIUM' => 'TRUCKPROG/WFL/DAILY/AUDIT/PREMIUM',
'TRUCKPROG/WFL/DAILY/BALRPT' => 'TRUCKPROG/WFL/DAILY/BALRPT',
'PROG-MEDICAL/WFL/DAILY/PMCLMEXT' => 'PROG-MEDICAL/WFL/DAILY/PMCLMEXT',
'AGPROG/WFL/DAILY/AGNUCOPREM' => 'AGPROG/WFL/DAILY/AGNUCOPREM',
'BL/WFL/WKLY/FEDEX/0005' => 'BL/WFL/WKLY/FEDEX/0005',
'TRUCKPROG/WFL/WKLY/DE542' => 'TRUCKPROG/WFL/WKLY/DE542',
'TRUCKPROG/WFL/WKLY/FDXDISAB' => 'TRUCKPROG/WFL/WKLY/FDXDISAB',
'TRUCKPROG/WFL/WKLY/FDXDISERR' => 'TRUCKPROG/WFL/WKLY/FDXDISERR',
'BL/WFL/ONLINE/DUMP/TRUCKING' => 'BL/WFL/ONLINE/DUMP/TRUCKING',
'DATATKWH/EXTRACTALL/DAILY/WFL' => 'DATATKWH/EXTRACTALL/DAILY/WFL',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP'
);
$smallprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$smallprog_wfls = array('no_job' => '------- select a job -------',
'SMALLPROG/WFL/DAILY/BATCH' => 'SMALLPROG/WFL/DAILY/BATCH',
'SMALLPROG/WFL/DAILY/CERTS' => 'SMALLPROG/WFL/DAILY/CERTS',
'SMALLPROG/WFL/OPERATIONS/PRINT' => 'SMALLPROG/WFL/OPERATIONS/PRINT',
'SMALLPROG/WFL/WKLY/BATCH' => 'SMALLPROG/WFL/WKLY/BATCH',
'SFCLAIMS/WFL/DAILY/DWHCLAIMS' => 'SFCLAIMS/WFL/DAILY/DWHCLAIMS',
'SFCLAIMS/WFL/DAILY/REPORTS' => 'SFCLAIMS/WFL/DAILY/REPORTS',
'SFCLAIMS/WFL/WEEKLY/REPORTS' => 'SFCLAIMS/WFL/WEEKLY/REPORTS',
'BL/WFL/ONLINE/DUMP/SFDB/1WORKER' => 'BL/WFL/ONLINE/DUMP/SFDB/1WORKER',
'$UTIL/O/AUDIT/CLOSE/SFDB' => '$UTIL/O/AUDIT/CLOSE/SFDB',
'DATASFWH/EXTRACTALL/DAILY/WFL' => 'DATASFWH/EXTRACTALL/DAILY/WFL',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP'
);
$persauto_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$persauto_wfls = array('no_job' => '------- select a job -------',
'PERSAUTO/WFL/DAILY/BATCH' => 'PERSAUTO/WFL/DAILY/BATCH',
'PERSAUTO/WFL/OPERATIONS/IMAGE' => 'PERSAUTO/WFL/OPERATIONS/IMAGE',
'PERSAUTO/WFL/OPERATIONS/PRINT' => 'PERSAUTO/WFL/OPERATIONS/PRINT',
'PERSAUTO/WFL/WKLY/BATCH' => 'PERSAUTO/WFL/WKLY/BATCH',
'PERSAUTO/WFL/DAILY/CLAIMS' => 'PERSAUTO/WFL/DAILY/CLAIMS',
'BL/WFL/ONLINE/DUMP/DB1/1WORKER/FULL' => 'BL/WFL/ONLINE/DUMP/DB1/1WORKER/FULL',
'$UTIL/O/AUDIT/CLOSE/DB1' => '$UTIL/O/AUDIT/CLOSE/DB1',
'DATAWH/EXTRACTALL/DAILY/WFL' => 'DATAWH/EXTRACTALL/DAILY/WFL',
'BL/WFL/OFFLINE/DUMP/WAREHOUSE' => 'BL/WFL/OFFLINE/DUMP/WAREHOUSE'
);
$isoprog_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$isoprog_wfls = array('no_job' => '------- select a job -------',
'ISOPROG/WFL/BATCH/ISOSAGDAILY' => 'ISOPROG/WFL/BATCH/ISOSAGDAILY'
);
$bkuplive_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$bkuplive_wfls = array('no_job' => '------- select a job -------',
'BL/WFL/ONLINE/DUMP/BLDB' => 'BL/WFL/ONLINE/DUMP/BLDB',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP',
'$UTIL/O/AUDIT/CLOSE/BLDB' => '$UTIL/O/AUDIT/CLOSE/BLDB',
'DATARDWH/EXTRACTALL/DAILY/REIN/WFL' => 'DATARDWH/EXTRACTALL/DAILY/REIN/WFL',
'(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => '(BLPACK)BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP',
'BL/WFL/FICHE/DISK' => 'BL/WFL/FICHE/DISK'
);
$testsite_status = array('none' => 'None',
'stopped' => 'Stopped',
'running' => 'Running',
'completed' => 'Completed',
);
$testsite_wfls = array('no_job' => '------- select a job -------',
'WFL/TESTLYON/DATABASE/ONLINE/DISABLE' => 'WFL/TESTLYON/DATABASE/ONLINE/DISABLE',
'UTIL/WFL/REMOVE/TESTLYON/BDFILES' => 'UTIL/WFL/REMOVE/TESTLYON/BDFILES',
'BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP' => 'BALDLYON/WFL/BLPACK/ARCHIVEANDBACKUP'
);
?>
<form method="POST" name="shiftreport" action="<?php print $_SERVER['PHP_SELF']; ?>">
<p>1st Shift <?php input_radiocheck('radio','shift','0','1','1'); ?></p>
<p>2st Shift <?php input_radiocheck('radio','shift','0','2','1'); ?></p>
<p>3st Shift <?php input_radiocheck('radio','shift','0','3','1'); ?></p>
<table>
<thead>
<tr>
<th>Application</th>
<th>Job Stream</th>
<th>Status</th>
</tr>
</thead>
<tbody>
<tr>
<td>ARTISAN</td>
<td>
<?php input_select('artprogs',$artprog_wfls['no_job'], $GLOBALS['artprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('artprog_stat', $artprog_status['none'] , $GLOBALS['artprog_status']); ?>
</td>
</tr>
<tr>
<td>SELF INSURED</td>
<td>
<?php input_select('bllyprogs',$bllyprog_wfls['no_job'], $GLOBALS['bllyprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('bllyprog_stat', $bllyprog_status['none'] , $GLOBALS['bllyprog_status']); ?>
</td>
</tr>
<tr>
<td>SBWC</td>
<td>
<?php input_select('sbwcprogs',$sbwcprog_wfls['no_job'],$GLOBALS['sbwcprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('sbwcprog_stat', $sbwcprog_status['none'] , $GLOBALS['sbwcprog_status']); ?>
</td>
</tr>
<tr>
<td>TCS</td>
<td>
<?php input_select('tcsprogs',$tcsprog_wfls['no_job'], $GLOBALS['tcsprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('tcsprog_stat', $tcsprog_status['none'] , $GLOBALS['tcsprog_status']); ?>
</td>
</tr>
<tr>
<td>IC</td>
<td>
<?php input_select('icprogs',$icprog_wfls['no_job'], $GLOBALS['icprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('icprog_stat', $icprog_status['none'] , $GLOBALS['icprog_status']); ?>
</td>
</tr>
<tr>
<td>TRUCKING</td>
<td>
<?php input_select('truckprogs',$truckprog_wfls['no_job'], $GLOBALS['truckprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('truckprog_stat', $truckprog_status['none'] , $GLOBALS['truckprog_status']); ?>
</td>
</tr>
<tr>
<td>SMALL FLEET</td>
<td>
<?php input_select('smallprogs',$smallprog_wfls['no_job'], $GLOBALS['smallprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('smallprog_stat', $smallprog_status['none'] , $GLOBALS['smallprog_status']); ?>
</td>
</tr>
<tr>
<td>PERSONAL AUTO</td>
<td>
<?php input_select('persauto',$persauto_wfls['no_job'], $GLOBALS['persauto_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('persauto_stat', $persauto_status['none'] , $GLOBALS['persauto_status']); ?>
</td>
</tr>
<tr>
<td>ISO</td>
<td>
<?php input_select('isoprog',$isoprog_wfls['no_job'], $GLOBALS['isoprog_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('isoprog_stat', $isoprog_status['none'] , $GLOBALS['isoprog_status']); ?>
</td>
</tr>
<tr>
<td>BACKUPS LIVE</td>
<td>
<?php input_select('bkuplive',$bkuplive_wfls['no_job'], $GLOBALS['bkuplive_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('bkuplive_stat', $bkuplive_status['none'] , $GLOBALS['bkuplive_status']); ?>
</td>
</tr>
<tr>
<td>TEST SITE INSTRUCTIONS</td>
<td>
<?php input_select('testsite',$testsite_wfls['no_job'], $GLOBALS['testsite_wfls'], '390px'); ?>
</td>
<td>
<?php input_select('testsite_stat', $testsite_status['none'] , $GLOBALS['testsite_status']); ?>
</td>
</tr>
</tbody>
</table>
</form>
</body>
</html>
The included functions file that I didn't include is below: Code: <?php
function input_text($element_name, $value) {
print '<input type="text" name="' . $element_name . '" value="';
print htmlentities($values[$element_name]) . '">';
}
function input_submit($element_name,$label) {
print '<input type="submit" name="' . $element_name .'" value="';
print htmlentities($label) .'"/>';
}
function input_textarea($element_name,$values) {
print '<textarea name="' . $element_name . '">';
print htmlentities($values[$element_name]) . '</textarea>';
}
function input_radiocheck($type,$element_name,$values,$element_value,$clicker = '0') {
print '<input type="' . $type . '" name="' . $element_name . '" value="' . $element_value . '" ';
if ($element_value == $values[$element_name]) {
print ' checked="checked"';
}
if ($clicker == '1')
print ' onclick="setReadOnly(this)"';
print '/>';
}
function input_select($element_name, $selected, $options, $drop_width = '100px', $multiple = false) {
print '<select style="width:' . $drop_width . ';" name="' . $element_name;
if ($multiple) { print '[]" multiple="multiple'; }
print '">';
$selected_options = array();
if ($multiple) {
foreach ($selected[$element_name] as $val) {
$selected_options[$val] = true;
}
} else {
$selected_options[ $selected[$element_name] ] = true;
}
foreach ($options as $option => $label) {
print '<option value="' . htmlentities($option) . '"';
if (isset($selected_options[$option])) {
print ' selected="selected"';
}
print '>' . htmlentities($label) . '</option>';
}
print '</select>';
}
?>
here is the html code that i have PHP Code: <td valign="middle" valign="middle"> <input type="radio" name="gender" id="genderM" value="Male" /> Male <input type="radio" name="gender" id="genderFM" value="Female" /> Female </td> and here is the js funtion PHP Code: var $j = jQuery.noConflict(); function isValidEmail(str) { return (str.indexOf(".") > 2) && (str.indexOf("@") > 0); } function validateForm(){ var firstName; var lastName; var email; var mobile; var comment; var error; firstName = $j('#firstName').val(); lastName = $j('#lastName').val(); email = $j('#email').val(); mobile = $j('#mobile').val(); comment = $j('#comment').val(); if(firstName=='' || firstName.length < 3){ error = 'Please Enter Your First Name'; $j('#errormsg').html('<p class="errors">'+ error +'</p>'); return false; } if(lastName=='' || lastName.length < 3){ error = 'Please Enter Your Second Name'; $j('#errormsg').html('<p class="errors">'+ error +'</p>'); return false; } //mob //$jmob_pattern = '^\d{10}$j'; if(mobile.length != 10 || isNaN(mobile)){ error = 'Please Enter Your Mobile Number'; $j('#errormsg').html('<p class="errors">'+ error +'</p>'); return false; } if(email=='' || !isValidEmail(email)){ error = 'Please Enter Your Email Address'; $j('#errormsg').html('<p class="errors">'+ error +'</p>'); return false; } if(comment.length < 5){ error = 'Please Enter A Comment'; $j('#errormsg').html('<p class="errors">'+ error +'</p>'); return false; } return true; } Does anybody know how i check to see if the radio button is select and also can anybody tell me how i can check for an email in the correct format the function isValidEmail in the above alows emails to pass through if they are in this format aaa@aaa. i only want them to go through if they are aaa@aaa.com Thanks for your help if you give it I have a form with a text box that is greyed out unless a checkbox is checked. The problem is if the checkbox is checked and this enables the text box to enter data and I hit reset, the text box does not reset and turn grey. It allows data to be entered. I have both the html reset button and the javascript clear form, but neither seem to work. How do I reset the text box to grey as well if reset is hit? Code: <form method="post" action="" name="resetproblemform" enctype="text/plain" onReset="return confirm('Do you really want
to reset the form?')">
<div>Check Which Apply:
LineTest1<input type="checkbox" name="status" value="1" style="margin-left:10px; margin-right:40px"
onclick="this.form.line1test2.disabled = !this.checked;"/>
Line1Test2<input type="text" name="line1test2" style="margin-left:10px; margin-right:67px" maxlength="9"
disabled="disabled" size="9"/> </div>
<div class="break10" style="margin-left:140px">
Line2Test1<input type="checkbox" name="status" value="3" style="margin-left:10px; margin-right:40px"
onclick="this.form.line2test2.disabled = !this.checked;"/>
Line2Test2<input type="text" name="line2test2" style="margin-left:10px; margin-right:67px" maxlength="9"
disabled="disabled" size="9"/> </div>
<div class="break10" style="margin-left:140px">Line3Test1<input type="checkbox" name="status" value="5"
style="margin-left:10px"/> </div>
<input type="submit" value="Submit" />
<input type="button" value="Reset JAVA" onClick="this.form.reset()" />
<input type="reset" value="Rest HTML" />
</form>
I'm sort of new at JS and trying to have an option to clear the fields by pressing the clear fields button, but nothing happens. This should be correct but for some odd reason it's not.. In addition, I have to edit my fuction doSubmit so once submitted an alert box with all the information is in it.. Does that make sense So the alert should be: John Does 462 Smith St Johnston, NC 44524 Email@com 214-854-6555 Etc Code: <script>
function doClear()
{
document.PizzaForm.customer.value = "";
document.PizzaForm.address.value = "";
document.PizzaForm.city.value = "";
document.PizzaForm.state.value = "";
document.PizzaForm.zip.value = "";
document.PizzaForm.phone.value = "";
document.PizzaForm.email.value = "";
document.PizzaForm.sizes[0].checked = false;
document.PizzaForm.sizes[1].checked = false;
document.PizzaForm.sizes[2].checked = false;
document.PizzaForm.sizes[3].checked = false;
document.PizzaForm.toppings[0].checked = false;
document.PizzaForm.toppings[1].checked = false;
document.PizzaForm.toppings[2].checked = false;
document.PizzaForm.toppings[3].checked = false;
document.PizzaForm.toppings[4].checked = false;
document.PizzaForm.toppings[5].checked = false;
document.PizzaForm.toppings[6].checked = false;
document.PizzaForm.toppings[7].checked = false;
return;
}
function doSubmit()
{
alert("Your pizza order has been submitted.");
return;
}
</script>
</head>
<body>
<form name="PizzaForm">
<h1>Pizza Parlor</h1>
<p>
<h4>Step 1: Enter your name, address, phone number, and email address:</h4>
<font face="Courier New">
Name: <input name=:customer" size="50" type="text"><br>
Address: <input name="address" size="50" type="text"><br>
City: <input name="city" size="15" type="text">
State: <input name="state" size="2" type="TEXT">
Zip: <input name="zip" size="5" type="text"><br>
Phone: <input name="phone" size="50" type="text"><br>
Email: <input name="email" size="50" type="text"><br>
</font>
</p>
<p>
<h4>Step 2: Select the size of pizza you want:</h4>
<font face="Courier New">
<input name="sizes" type="radio">Small
<input name="sizes" type="radio">Medium
<input name="sizes" type="radio">Large
<input name="sizes" type="radio">Jumbo<br>
</font>
</p>
<p>
<h4>Step 3: Select the pizza toppings you want:</h4>
<font face="Courier New">
<input name="toppings" type="checkbox">Pepperoni
<input name="toppings" type="checkbox">Canadanian Bacon
<input name="toppings" type="checkbox">Sausage<br>
<input name="toppings" type="checkbox">Mushrooms
<input name="toppings" type="checkbox">Pineapple
<input name="toppings" type="checkbox">Black Olives<br>
<input name="toppings" type="checkbox">Extra Cheese
<input name="toppings" type="checkbox">Green Peppers<br>
</font>
</p>
<input type="button" value="Submit Order" onClick="doSubmit()">
<input type="button" value="Clear Entries" onClick="doClear()">
</form>
</body>
Hello everyone. I'm having a bit of a problem with the ajax chat system that I'm working on. The problem that I am having is that in the chat box if say you want to go and high light something inside of the chat box every time the chat box goes to refresh which happens to be every 2 seconds it loses focusing on the text that you were high lighting. I know it's because that its re-entering the data box into there over and over again so every time it re-enters it loses the focus. I don't know of any other way of doing this though. This is a problem I would like to fix, I've seen others ajax chat systems that actually doesn't mess up the focus of the chat box when it refreshes. How can I go about doing this? Here's my current code: Code: var refresh_rate = 2000; //Every second
var idleTime = 1200000; //20 minutes
function $(elem) {
var obj = document.getElementById(elem);
if(!obj) return;
return obj;
}
function addEvent(elem, typ, func) {
var obj = document.getElementById(elem);
if(document.getElementById && !document.all) {
obj.addEventListener(typ, func, false);
}
else if(document.all) {
obj.attachEvent("on"+typ, func);
}
}
var http = createAjax();
function createAjax() {
if(!this.http && window.ActiveXObject) {
try {
this.http = new ActiveXObject("Msxml2.XMLHTTP" || "Microsoft.XMLHTTP");
}
catch(e1) {
this.http = false;
}
}
if(!this.http && window.XMLHttpRequest) {
try {
this.http = new XMLHttpRequest();
}
catch(e2) {
alert("Sorry we was unable to make a request between your browser.");
}
}
return this.http;
}
function cancelInterval() {
this.canInterval = window.setTimeout("stopInterval();", idleTime);
}
function stopInterval() {
window.clearInterval(this.refreshChat);
this.refreshChat = null;
this.canInterval = null;
$('chat-window').innerHTML += '<span style=\"color:#D83E3E; font-size:0.8em; font-style:italic;\">Your chat has gone idle</span>';
$('chat-window').scrollTop = $('chat-window').scrollHeight;
}
function canTimeout() {
window.clearTimeout(this.canInterval);
this.canInterval = null;
}
function startRefresh() {
this.refreshChat = window.setInterval("rh()", refresh_rate);
}
function pressEnter(e) {
if(this.canInterval) {
canTimeout();
}
var textbox = $('textbox').value;
if(e.keyCode == 13) { //press enter
http.open('post','scripts/php/chat.php',true);
http.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded');
http.send('textbox='+textbox);
$('textbox').value = '';
}
http.onreadystatechange = rf;
function rf() {
if(http.readyState == 4) {
var p = document.createElementBy("p");
p.innerHTML = http.responseText;
$('chat-window').appendChild(p);
$('chat-window').scrollTop = $('chat-window').scrollHeight;
}
}
if(!this.refreshChat) {
startRefresh();
}
}
function sendText() {
if(this.canInterval) {
canTimeout();
}
var textbox = $('textbox').value;
var params = 'textbox='+textbox;
http.open('post','scripts/php/chat.php',true);
http.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded');
http.setRequestHeader('Content-length', params.length);
http.setRequestHeader('Connection','close');
http.send(params);
$('textbox').value = '';
http.onreadystatechange = rf;
function rf() {
if(http.readyState == 4) {
$('chat-window').innerHTML = http.responseText;
$('chat-window').scrollTop = $('chat-window').scrollHeight;
}
}
if(!this.refreshChat) {
startRefresh();
}
}
function rh() {
if(!this.canInterval) {
cancelInterval();
}
var rmd = Math.random();
http.open('get','scripts/php/chat.php?s=true&rmd='+rmd);
http.send(null);
http.onreadystatechange = refresh;
function refresh() {
var scrollT;
($('expand').innerHTML == 'Expand +') ? scrollT = 133 : scrollT = 233;
if(http.readyState == 4 && http.status == 200) {
$('chat-window').innerHTML = http.responseText;
if($('chat-window').scrollTop+36 >= $('chat-window').scrollHeight-scrollT) {
$('chat-window').scrollTop = $('chat-window').scrollHeight;
}
}
}
}
this.refreshChat = window.setInterval("rh()", refresh_rate);
Thanks with any of the help that I can get. I need to learn how to clear form fields when a user clicks on them. Here is the site in question: http://www.yourvancouvermortgagebroker.ca/apply They used to work, but then I changed the field value and now it doesn't work on some of the fields (whichever ones I changed). Here is a link to the .js file: http://www.yourvancouvermortgagebroker.ca/js/apply.js okay. clearing a form. I have a clear button. when I push it, I want all the red text boxes and onblur messages to disappear. anyone have an idea on where i can start? heres javascript Code: function isFormValid()
{
var userF = document.getElementById('FName').value;
var userL = document.getElementById('LName').value;
var userPW = document.getElementById('pw').value;
var userPW2 = document.getElementById('pw2').value;
var userBDay = document.getElementById('BDay').value;
var userEmail = document.getElementById('email').value;
var NameFormat = /^[A-Za-z]{2,12}$/;
var PWFormat = /^[A-Za-z0-9]{6,12}$]/;
var BDayFormat = /^(\d{1,2})[\s\.\/-](\d{1,2})[\s\.\/-](\d{4})$/;
var EmailFormat = /^([\w-]{2,})@([A-z\d][-A-z\d]+)\.[A-z]{2,8}/;
var retVal = true;
var errorMsg = "";
if (!NameFormat.test(userF))
{
assignErrorClass("FName");
errorMsg = "First Name is required. 2-12 letters only\n";
retVal = false;
}
if (!NameFormat.test(userL))
{
assignErrorClass("LName");
errorMsg = errorMsg + "Last Name is required. 2-12 letters only\n";
retVal = false;
}
if (!PWFormat.test(userPW))
{
assignErrorClass("pw");
errorMsg = errorMsg + "Password is required. 6-12 letters or numbers only.\n";
retVal = false;
}
if (userPW2 == "")
{
assignErrorClass("pw2");
errorMsg = errorMsg + "Please Retype password.\n";
retVal = false;
}
if ((userPW != userPW2) && (userPW2 !== ""))
{
assignErrorClass("pw2");
errorMsg = errorMsg + "Passwords do not match.\n";
retVal = false;
}
if (userBDay == "")
{
assignErrorClass("BDay");
errorMsg = errorMsg + "Please Enter a Birthday.\n";
retVal = false;
}
if ((!BDayFormat.test(userBDay)) && (userBDay !== ""))
{
assignErrorClass("BDay");
errorMsg = errorMsg + "Incorrect Birthday format\n";
retVal = false;
}
if (badBirthday("BDay") && (userBDay !== "")) {
assignErrorClass("BDay");
retVal = false;
errorMsg = errorMsg + "Invalid Birthday\n";
}
if (userEmail == "")
{
assignErrorClass("email");
errorMsg = errorMsg + "Please Enter an Email address.\n";
retVal = false;
}
if ((!EmailFormat.test(userEmail)) && (userEmail !== ""))
{
assignErrorClass("email");
errorMsg = errorMsg + "Please Enter a valid Email address.\n";
retVal = false;
}
if (!retVal)
{
alert( errorMsg);
}
return retVal;
}
function assignErrorClass(objName)
{
var obj = document.getElementById(objName);
obj.className = "err";
}
function badBirthday( objName) {
var obj = document.getElementById(objName);
var dateStr = obj.value;
var mn = dateStr.split("/")[0];
var dy = dateStr.split("/")[1];
var yr = dateStr.split("/")[2];
var dateObj = new Date(yr,mn-1,dy); //JavaScript and PHP number the months 0 to 11.
if (dateObj.getFullYear() != yr || dateObj.getMonth()+1 != mn || dateObj.getDate() != dy) {
return true;
} else {
return false;
}
}
function checkFName()
{
var userF = document.getElementById('FName').value;
var elementF = document.getElementById('labelFName');
var NameFormat = /^[A-Za-z]{2,12}$/;
if (!NameFormat.test(userF))
{
elementF.innerHTML = "First Name is required. 2-12 letters only";
elementF.style.color = "red";
}
else
{
elementF.innerHTML = "";
elementF.style.color = "green";
}
}
function checkLName()
{
var userL = document.getElementById('LName').value;
var elementL = document.getElementById('labelLName');
var NameFormat = /^[A-Za-z]{2,12}$/;
if (!NameFormat.test(userL))
{
elementL.innerHTML = "Last Name is required. 2-12 letters only";
elementL.style.color = "red";
}
else
{
elementL.innerHTML = "";
elementL.style.color = "green";
}
}
function checkpw()
{
var userPW = document.getElementById('pw').value;
var elementPW = document.getElementById('labelpw');
var PWFormat = /^[A-z0-9]{6,12}$/;
if (!PWFormat.test(userPW))
{
elementPW.innerHTML = "Password is required. 6-12 letters or numbers only.";
elementPW.style.color = "red";
}
else
{
elementPW.innerHTML = "Good Password";
elementPW.style.color = "green";
}
}
function checkpw2()
{
var userPW2 = document.getElementById('pw2').value;
var userPW = document.getElementById('pw').value;
var elementPW2 = document.getElementById('labelpw2');
if ((userPW != userPW2) && (userPW2 !== ""))
{
elementPW2.innerHTML = "Passwords do not match.";
elementPW2.style.color = "red";
}
else if (userPW2 == "")
{
elementPW2.innerHTML = "Please Retype password.";
elementPW2.style.color = "red";
}
else
{
elementPW2.innerHTML = "Passwords Match";
elementPW2.style.color = "green";
}
}
function checkBDay()
{
var userBDay = document.getElementById('BDay').value;
var elementBDay = document.getElementById('labelBDay');
var BDayFormat = /^(\d{1,2})[\s\.\/-](\d{1,2})[\s\.\/-](\d{4})$/;
if (userBDay == "")
{
elementBDay.innerHTML = "Please enter A Birthday.";
elementBDay.style.color = "red";
}
else if ((!BDayFormat.test(userBDay)) && (userBDay !== ""))
{
elementBDay.innerHTML = "Please enter mm/dd/yyyy format.";
elementBDay.style.color = "red";
}
else if ((badBirthday("BDay")) && (userBDay !== ""))
{
elementBDay.innerHTML = "Please enter valid Birthday.";
elementBDay.style.color = "red";
}
else
{
elementBDay.innerHTML = "";
elementBDay.style.color = "green";
}
}
function checkEmail()
{
var userEmail = document.getElementById('email').value;
var elementEmail = document.getElementById('labelEmail');
var EmailFormat = /^([\w-]{2,})@([A-z\d][-A-z\d]+)\.[A-z]{2,8}/;
if ((!EmailFormat.test(userEmail)) && (userEmail !== ""))
{
elementEmail.innerHTML = "Please enter a Valid Email address.";
elementEmail.style.color = "red";
}
else if (userEmail == "")
{
elementEmail.innerHTML = "Please enter an Email address.";
elementEmail.style.color = "red";
}
else
{
elementEmail.innerHTML = "";
elementEmail.style.color = "green";
}
}
heres the html Code: <form action="mailto:hummdedum@felloff.com" method="post" name="form" onSubmit="return isFormValid();">
* First Name: <input type="text" name="FName" id="FName" onblur="checkFName();"/><label id="labelFName"></label><br />
* Last Name: <input type="text" name="LName" id="LName"onblur="checkLName();"/><label id="labelLName"></label><br />
* Password: <input type="password" id="pw" name="Password" onblur="checkpw();"/><label id="labelpw"></label><br />
*Re-type Password: <input type="password" name="2Password" id="pw2" onblur="checkpw2();" /><label id="labelpw2"></label><br />
I am a: <br />
<input type="radio" name="status" value="fresh" /> Freshman<br />
<input type="radio" name="status" value="soph" /> Sophomore<br />
<input type="radio" name="status" value="jr" /> Junior<br />
<input type="radio" name="status" value="sr" /> Senior<br />
I am taking classes in the: <br />
<input type="checkbox" name="semester" value="fall" /> fall time<br />
<input type="checkbox" name="semester" value="spring" /> Spring time <br />
My favorite element is:
<select name="element" id="element">
<option value="">select</option>
<option value="fire">Fire</option>
<option value="earth">Earth</option>
<option value="water">Water</option>
<option value="air">Air</option>
</select><br />
*Birthday: mm/dd/yyyy<input type="text" id="BDay" name="Birthday" onblur="checkBDay();"/><label id="labelBDay"></label><br />
*E-Mail: <input type="text" id="email" name="Email" onblur="checkEmail();"/><label id="labelEmail"></label><br />
<input type="submit" value="Submit" />
<input type="reset" value="Clear" />
</form>
css i guess would be Code: .err {
border: 2px solid #FF0000;}
#errMsg {
font-size: 110%;
color: #FF0000;}
super thanks!!!!!! -pumpkin I have a page with a form on it and a button that opens a new window for them to verify the data. What happens is that when the window opens, the form gets cleared out. This is with FireFox (IE has issues too!) Now this code has actually work fine for several years, now all of a sudden it's an issue. Possibly browser update issues? Here's a VERY stripped down version that shows the problem: Code: <HTML>
<HEAD>
<TITLE>Test</TITLE>
<script language="JavaScript" type="text/javascript">
function Proc_Reg(frm)
{
window.open("","","status=1,menubar=1,resizable=1,scrollbars=1,width=900,height=800");
}
</script>
</HEAD>
<BODY>
test
<form name=RegForm >
<TABLE>
<TR><TD><font color = "RED">PLEASE MAKE SURE YOUR BROWSER'S SECURITY SETTINGS ALLOW SCRIPTS TO RUN.</font></TD></TR></TABLE>
<BR><BR>
<font size=7>BCU Festival Registration</font><BR><center>Event Date: September 11, 2011</center>
<HR>
<table>
<tbody>
<tr><td><FONT FACE="BRITANNIC BOLD" size=4>
Name:</font></td><td>
<input title="What is Your Name?" name="FullName" rows="1" size="45" type="text">
</td></tr>
</tbody></table>
</form>
<A HREF="" OnClick="javascript:Proc_Reg(RegForm);">Click</A>
</BODY>
</HTML>
Ideas??? I have an Iframe in my webpage wher I have the focus. I now want to give the focus back to the parent document, so i've used top.focus() in my code. Works fine in almost every browser but not inIE7. Any hints? |
|||||||