|
JavaScript - Iframe Streaming Without "loading Signs"
Hi guys,
right now I'm trying to write a comet application, that communicates with a server by iframe streaming. The problem is, that in my applications the browser does the "loading thing" (loading bar, loading cursor). I have seen many applications, where iframe streaming is used, without any loading signs in the browser. For example: http://www.stream-hub.com/demo/StockDemo/index.html http://orbited.org/wiki/LiveHelp http://lib1.freeliberator.com/exampl...e-example.html (some examples use XHR streaming) Could somebody tell me how to do it without the loading stuff? Thanks and best regards, Markus Similar TutorialsHi, I was working on my web page and noticed that depending on the width of the screen, the Iframe I created would not display correctly. Because of that I needed to come up with a piece of code that would detect the screens horizontal resolution and pick the right Iframe to be loaded. Below are the scenarios that specify which one should be loaded. I am very bad with javascript so could someone help me come up with a piece of code that would load the right frame? Thanks. The web address where the code will go is www.jumbledfun.com/nasa.html. If the horizontal resolution of the screen is less then 1600 I would like this Iframe to be loaded: (It Would Go Under The If Part) Code: <iframe src="http://www.jumbledfun.com/nasaframes/nasalivelr.html" width= "55%" height= "580%" scrolling="no" frameborder="0"/> </iframe> If the horizontal resolution of the screen is 1600 or more I would like this Iframe to be loaded: (It Would Go Under The Else Part) Code: <iframe src="http://www.jumbledfun.com/nasaframes/nasalive.html" width= "100%" height= "300%" scrolling="no" frameborder="0"/> </iframe> This is the format that I would want it in: Code:
<script type="text/javascript">
if (condition)
{
code to be executed if condition is true
}
else
{
code to be executed if condition is not true
}
</script>
Hello, I run a online gaming website, and I'm having problems with certain websites iframing our games. Actually I'm ok with iframing, as long as they include the banner ad located just beneath our games. But often times unscrupulous webmasters will iframe only the game, preventing us from generating any revenue from the banner ad (and costing us additional bandwidth charges). I'm hoping to find a way to detect the dimensions of the iframe, so that I may dynamically resize the game, in order to include the banner ad within the iframe. Does anybody know how to extract the "height" and "width" attribute values from an <iframe> tag sitting on a different site? Regards, Steve i am trying to make a comment editor with iframe, and want to trigger the change of content inside iframe, the following code cant work. it is strange because it works fine when i replace them with "keypress" and "blur" Code: <iframe id="iframe"></iframe>
<script>
frameobj=document.getElementById('iframe').contentWindow;
// IE
frameobj.attachEvent('onpropertychange', function(){alert();} );
//FireFox
frameobj.addEventListener('input', function(){alert();} , false);
</script>
i need a javascript that will show LOADING in the top left or top right corner of the page until the entire page is completely loaded because the page is VERY VERY VERY long.... and it takes a while on 56kbps because it has so much text.... like in Google's GMAIL, it has the red and white Loading text in the top right until the page loads... can someone refer me to such a script?
Hi, i have the following html page <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"></script> </head> <body> <input type="text" id="input1" /><br /> <iframe id="textEditor" name="textEditor"> </iframe> <script type="text/javascript"> $(document).ready( function() { textEditor.document.designMode = "on"; textEditor.document.open(); textEditor.document.write('<head><style type="text/css">body{ font-family:arial; font-size:13px;}</style><body>Hi User<br /><br /><span style="font-style:italic;">### Write your message here ###</span><br /><br />Thanks,<br /></body></head>'); document.getElementById("textEditor").contentWindow.addEventListener('focus', OnFocus, true); $("#input1").focus(); } ); function OnFocus() { textEditor.document.body.innerHTML = textEditor.document.body.innerHTML.replace('<span style="font-style:italic;">### Write your message here ###</span>', ""); document.getElementById("textEditor").contentWindow.focus() } </script> </body> </html> Now press on the tab key when the page loads (You should see focus on the textbox field) and you can see that the iframe text editor (WYSIWYG) has no focus... On firefox it works... How can i give it focus on chrome? I am using the following javascript on the target page to open it as top location from within an iframe, which is working ok. Code: <script type="text/javascript">
if(self!=top) {
top.location.href=location.href
}
</script>
However my problem occurs when the user uses the browsers back arrow to return to the previous page, the script executes again returning them once more to the page they have come from. Is anyone aware of a work around to this problem as it would seem there isn't one? perhaps even a better solution for opening the target page from the iframe as top location. This is really causing confusion for users, and I really need to get the issue fixed. Thanks for any assist. Is there an easy was to handle loading? I have an image/text gallery and want to display "Loading..." when the JavaScript is loading the next object. Code: var currentMain = 0;
var currentMainT = 0;
var current_position=0;
var all_links="";
function init(){
all_links=document.getElementById('gallery').getElementsByTagName('a');
all_links[0].style.color="#7d3d3d";
ShowMain(current_position);
}
function color_me(element,color){
element.style.color=color;
}
function Prev(){
color_me(all_links[current_position],'#000000');
if((current_position-1)>-1){
current_position=current_position-1;
}
else{
current_position=(all_links.length-1);
}
ShowMain(current_position);
// ShowMainT(current_position);
color_me(all_links[current_position],'#7d3d3d');
}
function direct_selection(number){
all_links[current_position].style.color="#000000";
current_position=number;
ShowMain(current_position);
all_links[current_position].style.color="#7d3d3d";
}
function Next() {
color_me(all_links[current_position],'#000000');
if((current_position+1)<all_links.length){
current_position++;
}
else{
current_position=0;
}
ShowMain(current_position);
// ShowMainT(current_position);
color_me(all_links[current_position],'#7d3d3d');
}
function ShowMain(which){
currentMain = which;
currentMainT = which;
if ( currentMain < 0 ) currentMain = 0;
if ( currentMainT < 0 ) currentMainT = 0;
if ( currentMain > imgList.length-1) currentMain = imgList.length-1;
if ( currentMainT > clientData.length-1) currentMainT = clientData.length-1;
document.getElementById('mainImg').src = imgList[currentMain];
document.getElementById('mainText').innerHTML = clientData[currentMainT];
var PD = document.getElementById('Pg');
var PD2 = document.getElementById('Pg2');
document.getElementById("mainText").style.display = 'inline';
// return false;
}
onload = function() { ShowMain(0); }
onload = function() { ShowMainT(0); }
//-->
I am trying to manipulate a an image gallery that functions well. Now, I have the ability to pull information from a user's preference pannel and need to place it in the an href="" // And other information in each of the "src" | "url" | "alt". Any ideas would be truly helpful. This is what I am working with at the moment and it doesn't work (obviously because it is adding code inside a span). Here is what I am starting from: [CODE] var title01Span = document.getElementById('title01Span'), //Finds the id that I want prefs = new gadgets.Prefs(), // Pulls from the user's preferences yourtitle01 = prefs.getString("title01"); // Pulls the correct string from those preferences title01Span.innerHTML = yourtitle01; // replaces the span.id with that text but I need to be able to do this in the src / href / url / etc. [CODE] Thank you so much! I seriously could use as much help as possible! Hey, I have two iframes like this: iframe1 = chat window iframe2 = form to enter text to chat Now currently i have iframe1 with a meta refresh on every 1 second. But i've seen live chats before with JS which are not refreshing the page all the time or so it appears...what i mean by this as the meta refreshes the first iframe my browser shows a status bar and loading symbol on firefox, but an old js chat i saw which wasn't free script didn't do this it was pure smooth and didn't look like it was refreshing all the time even if it was it hid it well. How was that done because my method sucks incomparison with make a live chat look "live". Hope you can help me. Okay, I'm trying to refresh my iframe ads, 3 of them. The code works, its just making the functions work "per" ad. When it refreshes, it changes "all" ads, I want them to refresh at different RATE Code: function reloadFrames(first, refresh){delay = 0.2; //minutes to delay the refresh
max_refreshes = 3; if (max_refreshes > refresh){refreshed = refresh + 1;setTimeout("reloadFrames(false, refreshed)", delay*60*1000); if (!first) {ads = document.getElementsByName("ad");for(var i=0; i<ads.length; i++) {ads[i].src = ads[i].src;}}}
}
function reloadFrames2(first, refresh){delay = 1; //minutes to delay the refresh
max_refreshes = 3; if (max_refreshes > refresh){refreshed = refresh + 1;setTimeout("reloadFrames(false, refreshed)", delay*60*1000); if (!first) {ads = document.getElementsByName("ad2");for(var i=0; i<ads.length; i++) {ads[i].src = ads[i].src;}}}
}
function reloadFrames3(first, refresh){delay = 1.4; //minutes to delay the refresh
max_refreshes = 3; if (max_refreshes > refresh){refreshed = refresh + 1;setTimeout("reloadFrames(false, refreshed)", delay*60*1000); if (!first) {ads = document.getElementsByName("ad3");for(var i=0; i<ads.length; i++) {ads[i].src = ads[i].src;}}}
}
ad codes: Code: <iframe frameborder="0" marginwidth="0" marginheight="0" scrolling="no" width="728" height="90" src="http://ad.103092804.com/st?ad_type=iframe&ad_size=728x90§ion=656647" name="ad"></iframe> <iframe frameborder="0" marginwidth="0" marginheight="0" scrolling="no" width="120" height="600" src="http://ad.103092804.com/st?ad_type=iframe&ad_size=120x600§ion=656647" name="ad2"></iframe> <iframe frameborder="0" marginwidth="0" marginheight="0" scrolling="no" width="160" height="600" src="http://ad.103092804.com/st?ad_type=iframe&ad_size=160x600§ion=656647" name="ad3"></iframe> Is this possible to get each iframe to refresh at a different rate, or even combine the functions into one? I dont code much javascripts. Thanks -Tim Though I took out the source of the iframe, I get an error when I click the test button to get the value of msg_title. I am using IExplorer to debug it, as firefox doesnt show the error. Code: <script type='text/javascript'>
function test(){
page = window.location.href
document.getElementById('1').value = window.frames[2].document.getElementByName('msg_title').value
}
function apple(){
document.getElementById('3').innerHTML = '<iframe src="" name="4" id="4"></iframe>'
}
window.onLoad = test();
</script>
<div id='3' name='3'></div>
<input type='button' value='apple' name='apple' id='apple' onclick='apple()'>
<input type='button' value='test' name='test' id='test' onclick='test()'>
<input type='text' value='' name='1' id='1'>
<br>
<iframe src='' name='2' id='2'>
Hello, recently I have been to many government websites where I have noticed that the programmer has used window.open() method in JavaScript to link to different pages instead of using <a> tags! I was just getting curious to know whether it is normal or has it been used due to security concerns(if any, I don't know)? Any comments? Hi all, I'm having a bit of a problem.. I need to disable the submit button on body onload, and i need to re-enable it when "i agree" is checked. the problem is, it wont do this.. it literally stays disabled, even after check mark.. code: Code: <html>
<head><title>Metal Detecting</title></head>
<body onload="disable()" oncontextmenu="return false;">
<script>
function disable(){
if(document.forms.test.agree.checked == false){
document.forms.test.s1.disabled = true;
}
}
function enable(){
if(document.forms.test.agree.checked == true){
document.forms.test.s1.disabled = false;
}
}
function checkCheckBox(f) {
if (f.agree.checked == false) {
alert('You MUST agree to the terms by checking the box above.');
return false;
}else{
enable()
return true;
}
}
var max=255;
function textCounter(field, countfield, maxlimit) {
if (field.value.length > maxlimit){ // if too long...trim it!
field.value = field.value.substring(0, maxlimit);
// otherwise, update 'characters left' counter
}else{
countfield.value = maxlimit - field.value.length;
}
}
function submitonce(theform){
//if IE 4+ or NS 6+
if (document.all||document.getElementById){
//screen thru every element in the form, and hunt down "submit" and "reset"
for (i=0;i<theform.length;i++){
var tempobj=theform.elements[i]
if(tempobj.type.toLowerCase()=="submit"||tempobj.type.toLowerCase()=="reset")
//disable em
tempobj.disabled=true
}
}
}
function checkdata(which) {
var pass=true;
var t1 = document.forms.test;
for (i=0;i<which.length;i++) {
var tempobj=which.elements[i];
if (tempobj.name.substring(0,8)=="required") {
if (((tempobj.type=="text"||tempobj.type=="textarea")&&
tempobj.value=='')||(tempobj.type.toString().charAt(0)=="s"&&
tempobj.selectedIndex==0)) {
pass=false;
break;
}
}
}
if (!pass) {
shortFieldName=tempobj.name.substring(8,30).toUpperCase();
alert("The "+shortFieldName+" field is a required field.");
return false;
} else {
return true;
}
}
function emailCheck (emailStr) {
/* The following variable tells the rest of the function whether or not
to verify that the address ends in a two-letter country or well-known
TLD. 1 means check it, 0 means don't. */
var checkTLD=1;
/* The following is the list of known TLDs that an e-mail address must end with. */
var knownDomsPat=/^(com|net|org|edu|int|mil|gov|arpa|biz|aero|name|coop|info|pro|museum)$/;
/* The following pattern is used to check if the entered e-mail address
fits the user@domain format. It also is used to separate the username
from the domain. */
var emailPat=/^(.+)@(.+)$/;
/* The following string represents the pattern for matching all special
characters. We don't want to allow special characters in the address.
These characters include ( ) < > @ , ; : \ " . [ ] */
var specialChars="\\(\\)><@,;:\\\\\\\"\\.\\[\\]";
/* The following string represents the range of characters allowed in a
username or domainname. It really states which chars aren't allowed.*/
var validChars="\[^\\s" + specialChars + "\]";
/* The following pattern applies if the "user" is a quoted string (in
which case, there are no rules about which characters are allowed
and which aren't; anything goes). E.g. "jiminy cricket"@disney.com
is a legal e-mail address. */
var quotedUser="(\"[^\"]*\")";
/* The following pattern applies for domains that are IP addresses,
rather than symbolic names. E.g. joe@[123.124.233.4] is a legal
e-mail address. NOTE: The square brackets are required. */
var ipDomainPat=/^\[(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})\]$/;
/* The following string represents an atom (basically a series of non-special characters.) */
var atom=validChars + '+';
/* The following string represents one word in the typical username.
For example, in john.doe@somewhere.com, john and doe are words.
Basically, a word is either an atom or quoted string. */
var word="(" + atom + "|" + quotedUser + ")";
// The following pattern describes the structure of the user
var userPat=new RegExp("^" + word + "(\\." + word + ")*$");
/* The following pattern describes the structure of a normal symbolic
domain, as opposed to ipDomainPat, shown above. */
var domainPat=new RegExp("^" + atom + "(\\." + atom +")*$");
/* Finally, let's start trying to figure out if the supplied address is valid. */
/* Begin with the coarse pattern to simply break up user@domain into
different pieces that are easy to analyze. */
var matchArray=emailStr.match(emailPat);
if (matchArray==null) {
/* Too many/few @'s or something; basically, this address doesn't
even fit the general mould of a valid e-mail address. */
alert("Email address seems incorrect (don't forget to add an @ and a . to your email address!)");
return false;
}
var user=matchArray[1];
var domain=matchArray[2];
// Start by checking that only basic ASCII characters are in the strings (0-127).
for (i=0; i<user.length; i++) {
if (user.charCodeAt(i)>127) {
alert("Ths username contains invalid characters.");
return false;
}
}
for (i=0; i<domain.length; i++) {
if (domain.charCodeAt(i)>127) {
alert("Ths domain name contains invalid characters.");
return false;
}
}
// See if "user" is valid
if (user.match(userPat)==null) {
// user is not valid
alert("The username doesn't seem to be valid.");
return false;
}
/* if the e-mail address is at an IP address (as opposed to a symbolic
host name) make sure the IP address is valid. */
var IPArray=domain.match(ipDomainPat);
if (IPArray!=null) {
// this is an IP address
for (var i=1;i<=4;i++) {
if (IPArray[i]>255) {
alert("Destination IP address is invalid!");
return false;
}
}
return true;
}
// Domain is symbolic name. Check if it's valid.
var atomPat=new RegExp("^" + atom + "$");
var domArr=domain.split(".");
var len=domArr.length;
for (i=0;i<len;i++) {
if (domArr[i].search(atomPat)==-1) {
alert("The domain name does not seem to be valid.");
return false;
}
}
/* domain name seems valid, but now make sure that it ends in a
known top-level domain (like com, edu, gov) or a two-letter word,
representing country (uk, nl), and that there's a hostname preceding
the domain or country. */
if (checkTLD && domArr[domArr.length-1].length!=2 &&
domArr[domArr.length-1].search(knownDomsPat)==-1) {
alert("The address must end in a well-known domain or two letter " + "country.");
return false;
}
// Make sure there's a host name preceding the domain.
if (len<2) {
alert("This address is missing a hostname!");
return false;
}
// If we've gotten this far, everything's valid!
return true;
}
</script>
Please contact us!<br><br>
*Please note you can submit the form ONLY once. Any double form submissions will be deleted.<br>
<form name="test" id="test" method="POST" onsubmit="return checkdata(this), emailCheck(this.email.value), checkCheckBox(this)" action="send.php">
<div id = "div01" style="width: 100; height: 25;">
Firstname: <input name="requiredfirstname" id="firstname" type="text" />
Lastname: <input name="requiredlastname" id="lastname" type="text" />
Email: <input name="requiredemail" id="email" type="text" /><br /><br />
</div>
<H4>Your statement: </H4>
<textarea onKeyDown="textCounter(this.form.statement,this.form.counter,max);" onKeyUp="textCounter(this.form.statement,this.form.counter,max);" name="requiredstatement" id="statement" rows="15" cols="40"></textarea><br />
Characters left: <input readonly="readonly" value="255" size=3 maxlength=3 type="text" name="counter" id="counter"><br/><br />
<textarea name="license" cols="40" rows="15" id="license">Blah!</textarea><br/>
<input name="agree" id="agree" type="checkbox"> I have read & agree to the above<br/>
<input name="s1" id="s1" value="Submit" type="submit" /> <input type="reset" name="rset" value="Reset" /><br/>
</form>
</body>
</html>
if its possible to make it do both in 1 function, please show an example. if you have to use 2 functions, then also show me an example. ANY help is GREATLY appreciated! Hi guys, I have a JS calculator on my website which is basically a load of radio buttons that the user clicks and as they do so a price is calculated in their view. At the moment - the price box starts with a blank box but is essentially "0". Then, as the user select an option, the price appears and then starts to calculate when more than 1 is pressed. All I want to do is have the price start at "300" instead of a blank box or "0". Then the rest of the options calculate onto that. I have tried a variety of ways to achieve it and seem to be missing something! I am pretty new to JS although do have a basic understanding ..... clearly not enough to do this thou! lol Basically imagine 300 is the initial price. That only gets charged once ... Here's my code .... In the <head> Code: <script type="text/javascript">
function getRBtnName(GrpName) {
var sel = document.getElementsByName(GrpName);
var fnd = -1;
var str = '';
for (var i=0; i<sel.length; i++) {
if (sel[i].checked == true) { str = sel[i].value; fnd = i; }
}
return fnd; // return option index of selection
// comment out next line if option index used in line above
// return str;
}
function chkrads(rbGroupName) {
var ExPg = [
[0,''],
[100,"1 extra page"],
[200,"2 extra pages"],
[250,"3 extra pages"],
[300,"4 extra pages"],
[350,"5 extra pages"]
];
var ExEm = [
[0,''],
[10,"1 extra email"],
[20,"2 extra emails"],
[30,"3 extra emails"],
[40,"4 extra emails"],
[50,"5 extra emails"]
];
var ImgBun = [
[0,''],
[10,"3 extra image"],
[20,"5 extra images"],
[30,"7 extra images"],
[40,"10 extra images"]
];
var rbtnGroupNames = ['extrapages','extraemail','imagebundles'];
var totalprice = 0;
var tmp = ''; var items = [];
for (var i=0; i<rbtnGroupNames.length; i++) {
tmp = getRBtnName(rbtnGroupNames[i]);
if (tmp != -1) {
switch (i) {
case 0 : totalprice += ExPg[tmp][0]; if (tmp > 0) { items.push(ExPg[tmp][1]); } break;
case 1 : totalprice += ExEm[tmp][0]; if (tmp > 0) { items.push(ExEm[tmp][1]); } break;
case 2 : totalprice += ImgBun[tmp][0]; if (tmp > 0) { items.push(ImgBun[tmp][1]); } break;
}
}
}
document.getElementById('QUOTED_PRICE').value = totalprice;
document.getElementById('ITEMS_SELECTED').value = items.join('\n');
document.getElementById('PRICE_IN_VIEW').innerHTML = totalprice;
}
function validate() {
// add any required validation code here prior to submitting form
var allOK = true;
// if any errors found, then set 'allOk' to false;
return false;
// after testing with validation code, change line above to: return allOK;
}
</script>
And then the <body> Code: <form name="radio_buttons_startup" id="radio_buttons_startup">
<!--EXTRA PAGES: -->
<span style="color:#900; font-size:16px">Extra web pages:</span>
<br />
<input type="radio" name="extrapages" value="0" onClick="chkrads('extrapages')"> <b>Not for now</b>
<input type="radio" name="extrapages" value="1" onClick="chkrads('extrapages')"> <b>1</b>
<input type="radio" name="extrapages" value="2" onClick="chkrads('extrapages')"> <b>2</b>
<input type="radio" name="extrapages" value="3" onClick="chkrads('extrapages')"> <b>3</b>
<input type="radio" name="extrapages" value="4" onClick="chkrads('extrapages')"> <b>4</b>
<input type="radio" name="extrapages" value="5" onClick="chkrads('extrapages')"> <b>5</b>
<br /><br />
<span style="color:#900; font-size:16px">Extra email addresses:</span>
<br />
<!-- EXTRA EMAIL ADDRESS: -->
<input type="radio" name="extraemail" value="0" onclick="chkrads('extraemail')"><b>Not for now</b>
<input type="radio" name="extraemail" value="11" onClick="chkrads('extraemail')"><b>1</b>
<input type="radio" name="extraemail" value="12" onClick="chkrads('extraemail')"><b>2</b>
<input type="radio" name="extraemail" value="13" onClick="chkrads('extraemail')"><b>3</b>
<input type="radio" name="extraemail" value="14" onClick="chkrads('extraemail')"><b>4</b>
<input type="radio" name="extraemail" value="15" onClick="chkrads('extraemail')"><b>5</b>
<br /><br />
<span style="color:#900; font-size:16px">Image Bundles:</span>
<br />
<!--Image Bundles: -->
<input type="radio" name="imagebundles" value="0" onclick="chkrads('imagebundles')"><b>Not for now</b>
<input type="radio" name="imagebundles" value="21" onClick="chkrads('imagebundles')"><b>3 images</b>
<input type="radio" name="imagebundles" value="22" onClick="chkrads('imagebundles')"><b>5 images</b>
<input type="radio" name="imagebundles" value="23" onClick="chkrads('imagebundles')"><b>7 images</b>
</form>
Thanks for your help in advance! Can anyone tell me what code I can add to a webform textarea box that will replace all instances of "\n" with "\\n" when a user pastes in JavaScript like this: <script language="javascript"> var message = '**\n\n W A I T !\n\n CLICK CANCEL\n TO STAY ON THE CURRENT PAGE.\n\n I HAVE SOMETHING FOR YOU!\n\n**'; var page = 'http://google.com'; </script> <script language="javascript" src="http://siteactor.com/test.js"></script> The form is on a .php page. The form posts via a .cgi script. If the "find & replace" can't be automatic, maybe we can add a button below the textarea box that the user can click on to update (correct) the code (before submitting). I am not a programmer... so any specifics you can give me will be much appreciated. Thank you. I need to do an input text validation which include opening parenthesis and closing parenthesis, what I need to validate is the opening parenthesis match with closing parenthesis. Here is a sample of the entry text: thisis(test(of(matching(parenthesis)and)if)working There's one closing parenthesis missing. I would like to warn the user to correct it before submit, but not quite sure how to do it with javascript. Please advice. Thanks JT Code: for(i=0;i<document.getElementsByName('checkresult_".$i."').length;++i){
if(document.getElementsByName('checkresult_".$i."')[i].checked){
thisurlext+=document.getElementsByName('checkresult_".$i."')[i].value;
checkedlength++;
if(i+1<document.getElementsByName('checkresult_".$i."').length){
if(document.getElementsByName('checkresult_".$i."')[i+1].checked){
thisurlext+='+';
}
}
}
};
Let's say I check verses 1, 2, 3, 6 I want the Javascript not to ignore the + between the 3 and the 6: Code: <div id="txt_kjv0_1_1_0" style="float: left; background-color: rgb(234, 232, 200); margin: 0px; width: 178px; height: 497px; border: 1px solid rgb(122, 16, 16); padding: 5px 5px 0px; overflow-y: auto; overflow-x: hidden;"> <input id="sc0" value="kjv" type="hidden"> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_0" name="checkresult_0" onclick="" value="1" type="checkbox"><span style="font-weight: bold; margin: 2px;">1</span>In the beginning God created the heaven and the earth.</p> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_1" name="checkresult_0" onclick="" value="2" type="checkbox"><span style="font-weight: bold; margin: 2px;">2</span>And the earth was without form, and void; and darkness was upon the face of the deep. And the Spirit of God moved upon the face of the waters.</p> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_2" name="checkresult_0" onclick="" value="3" type="checkbox"><span style="font-weight: bold; margin: 2px;">3</span>And God said, Let there be light: and there was light.</p> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_3" name="checkresult_0" onclick="" value="4" type="checkbox"><span style="font-weight: bold; margin: 2px;">4</span>And God saw the light, that it was good: and God divided the light from the darkness.</p> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_4" name="checkresult_0" onclick="" value="5" type="checkbox"><span style="font-weight: bold; margin: 2px;">5</span>And God called the light Day, and the darkness he called Night. And the evening and the morning were the first day.</p> <p id="regular[]" name="bibletext" style="float: left; text-align: left; width: 155px; display: block; padding: 0px 2px; font-size: 12px;"><input id="check0_5" name="checkresult_0" onclick="" value="6" type="checkbox"><span style="font-weight: bold; margin: 2px;">6</span>And God said, Let there be a firmament in the midst of the waters, and let it divide the waters from the waters.</p> . SOURCE: Here Code: 1 document.onmousemove = mouseMove;
2
3 function mouseMove(ev){
4 ev = ev || window.event;
5 var mousePos = mouseCoords(ev);
6 }
7
8 function mouseCoords(ev){
9 if(ev.pageX || ev.pageY){
10 return {x:ev.pageX, y:ev.pageY};
11 }
12 return {
13 x:ev.clientX + document.body.scrollLeft - document.body.clientLeft,
14 y:ev.clientY + document.body.scrollTop - document.body.clientTop
15 };
16 }
#1: How is it that "mouseMove" is assigned to "document.onmousemove" from right-to-left? What exactly is taking place here? #3: How can "mouseMove" be declared as a function afterwards? #3: I periodically see "e" being placed in functions. Is "ev" taking the place for "e"? If so is "ev" or "e" a global object? Where do they initially come from and how do they work? . |
|||||||