|
PHP - Mysql/php Query Using Regexp Issue
Hi there, im looking for a little bit of help, could someone who knows how to use REXEXP properly tell me how i would select only the uppercase titles from title column and display them
Code: [Select] +------------+-----------+ | id | title | +------------+-----------+ | 1 | one | | 2 | TWO | | 3 | three | | 4 | FOUR | +------------+-----------+ Code: [Select] <?php $username="user"; $password="pw"; $database="db"; mysql_connect(localhost,$username,$password); @mysql_select_db($database) or die( "Unable to select database"); $query = "SELECT title FROM template WHERE name REGEXP '^(A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z)'"; $result = mysql_query($query); while($row = mysql_fetch_array($result, MYSQL_ASSOC)) { echo "Custom Template Name : {$row['title']} <br><br>"; } mysql_close(); ?> This was an attempt i made but it did not work i got the following error: Quote Warning: mysql_fetch_array() expects parameter 1 to be resource, boolean given in C:\ProgramData\xampp\htdocs\test.php on line 14 I did attempt to do a search on it but if im honest i didnt fully understand what they were saying. Im using php 5.3.5 and mysql 5.5.8 Thanks for your help Similar TutorialsHi all
I want to display 5 records found in query and display by date order to most recent to todays date.
Any help most appreciated.
The php script below
<?php include 'c/config.php'; include 'c/library/opendb.php'; include 'c/library/timeFunctions.php'; include 'c/library/displayFunctions2.php'; $query = "SELECT * FROM events ORDER BY date,time"; $result = mysql_query($query); while($row = mysql_fetch_assoc($result)) { if ($row['date'] >= date('Y-m-d')) { displayEventsCurrent($row); } } include 'c/library/closedb.php'; ?> Hi, I am defining a php script to check captured input username and password from a form against a MySQL database and can't get the syntax right - regarding the $_POST['password'] portion of query. Here's the actual php code showing query: Code: [Select] //create and issue the query // $command = "SELECT username FROM agents WHERE username ='".$_POST['username']."';"; // THIS ONE WORKS JUST FINE IF JUST CHECKING USERNAME from DB $command = "SELECT username FROM agents WHERE username ='".$_POST['username']."' AND password = MD5('".$_POST['password']."');"; echo "Command: ".$command."<br>"; $result = mysql_query($command); echo "Result: ".$result."<br>"; Here's the error I get on the php page when loading and submitting username and password: Command: SELECT username FROM agents WHERE username ='user1' AND password = MD5('pass1234'); Result: Warning: mysql_num_rows(): supplied argument is not a valid MySQL result resource in /home/websited/public_html/projects/forgottenmobile/index.php on line 58 Note: line 58 is just checking for: Code: [Select] mysql_num_rows($result) == 1; The issue is the query is not correct regarding: password = MD5('pass1234') portion of the SQL string. I know it's with the location of th single and double quotes but struggling to find the right syntax structure. Can someone advise the correct syntax structure to include MD5 function for the variable '$_POST[password]' in the $command query? --- Note: the password is encrypted using MD5 so that function required in the query. thanks! Alright so I have a database table of users set up that creates a unique member_id for each new registered user. I then have a second table that stores data entries that also has a member_id field. When the users are logged in, they can enter a new entry into this second table. The problem I'm having is that when the entry is written into the database, the member_id field always comes up as "0." I'm using the session variables to pass the member_id to the query. Here's the code: //Create Member Session Variables $memberID = $_SESSION['SESS_MEMBER_ID']; //Create INSERT query $qry = "INSERT INTO userBars(member_id, barName, barAddress, barCity, barState, barZip) VALUES('$memberID','$ename','$street','$city','$state','$zipcode')"; $result = @mysql_query($qry); //Check whether the query was successful or not if($result) { header("location: register-success.php"); exit(); }else { die("Query failed"); } When I echo the $memberID var I do in fact get the member_id, but when this script writes into the database, the member_id field is always set to "0." Anyone have any ideas as to why this might happen? I'm having a few issues with a serach function in Internet Explorer, it works fine in firefox which is very annoying. What basically is happening, is the a form is sumbitting and posting info across, but on itself and then this is transfered into a php variable which is used on the query. Default values have been assigned if the isset of the form is not true. So I believe the issue is occuring on the " if(isset($_POST['submit'])) " but as stated it works perfectly fine in firefox. Any suggestions? Code: [Select] <?php print " <form target='_self' method='POST'> <table class=''> <tr> <td> <input name='vehicle' type='text' id='search_name' size='16'> <input type='image' src='images/search.gif' alt='Search' name='submit' id='search' value='Search'/> </td> </tr> <tr> <td> <select name='filter' id='filter'> <option value='make' selected='selected'>Filter By</option> <option value='make'>Vehicle Manufacture</option> <option value='model'>Vehicle Model</option> <option value='our_price'>Price</option> <option value='delivery_time'>Delivery Time</option> </select> </td> </tr> <tr> <td> <input type='radio' name='direction' value='ASC' checked/>Ascending <input type='radio' name='direction' value='DESC' />Descending </td> </tr> </form> "; include "connections/dbconnect.php"; if(isset($_POST['submit'])) { $vehicle = $_POST['vehicle']; $filter = $_POST['filter']; $direction = $_POST['direction']; //$rowsPerPage = $_POST['limit']; } else { $filter = "make"; $direction = "ASC"; } //$manfactures = "Ford"; if(isset($_GET['limit'])) { $rowsPerPage = $_GET['limit'];; } else { // how many rows to show per page $rowsPerPage = 10; } // by default we show first page $pageNum = 1; // if $_GET['page'] defined, use it as page number if(isset($_GET['page'])) { $pageNum = $_GET['page']; } // counting the offset $offset = ($pageNum - 1) * $rowsPerPage; $car_query = " SELECT * FROM cars WHERE model LIKE '%$vehicle%' OR make LIKE '%$vehicle%' OR model_details LIKE '%$vehicle%' OR search LIKE '%$vehicle%' ORDER BY $filter $direction LIMIT $offset, $rowsPerPage"; $car_result = mysql_query($car_query) or die ("Error in query: $car_query. ".mysql_error()); setlocale(LC_MONETARY, 'en_GB'); $fmt = '%i'; // how many rows we have in database $query = "SELECT COUNT(model) AS numrows FROM cars"; $result = mysql_query($query) or die('Error, query failed'); $row = mysql_fetch_array($result, MYSQL_ASSOC); $numrows = $row['numrows']; // how many pages we have when using paging? $maxPage = ceil($numrows/$rowsPerPage); // print the link to access each page $self = $_SERVER['PHP_SELF']; $nav = ''; for($page = 1; $page <= $maxPage; $page++) { if ($page == $pageNum) { $nav .= " $page "; // no need to create a link to current page } else { $nav .= " <a href=\"$self?page=$page&limit=$rowsPerPage\">$page</a> "; } } if ($pageNum > 1) { $page = $pageNum - 1; $prev = " <a href=\"$self?page=$page&limit=$rowsPerPage\">[Prev]</a> "; $first = " <a href=\"$self?page=1&limit=$rowsPerPage\">[First Page]</a> "; } else { $prev = ' '; // we're on page one, don't print previous link $first = ' '; // nor the first page link } if ($pageNum < $maxPage) { $page = $pageNum + 1; $next = " <a href=\"$self?page=$page&limit=$rowsPerPage\">[Next]</a> "; $last = " <a href=\"$self?page=$maxPage&limit=$rowsPerPage\">[Last Page]</a> "; } else { $next = ' '; // we're on the last page, don't print next link $last = ' '; // nor the last page link } if (mysql_num_rows($car_result) > 0) { ...... bringing back all the information from the database Hi I have a 4 button navigation, home, projects, about and contact. This is in one table, menu, this table has the relevant icon to display with the appropriate link and another field is the link itself, ?page=home. Menu is joined with the pages table using the following query SELECT * FROM menu LEFT JOIN pages ON menu.id = pages.page_id When I run this through phpmyadmin sql console everything is returned as expected, all pages match up with the navigation. When I print_r($row); all 4 fields from the nav table and all 7 fields from the pages table, totalling 11 fields, display as per the query running in phpmyadmin which was as expected however, on the actual page it isn't going as hoped and expected. I have
/* query for page data(navigation & title) */
$sql= "SELECT * FROM menu LEFT JOIN pages ON menu.id = pages.page_id"; $stmt = $db->query($sql); $row = $stmt->fetchAll(PDO::FETCH_ASSOC);
<?php echo $row['header']; ?>
*/ echo "<pre>"; print_r($row); echo "</pre>";
$row = $stmt->fetch(PDO::FETCH_ASSOC);
The php used for the navigation is
<?php echo $row['url']; ?> <?php echo $row['icon']; ?> <?php echo $row['header']; ?>
<a href="<?php echo $row['url']; ?>"><i class="<?php echo $row['icon']; ?>"></i> <?php echo $row['header']; ?></a>
As I know the SQL is working I realise I have made an error in the PHP but cannot work out what. As far as I can see I should be using fetch, rather than fetchAll, so as to only return 1 record as requested via the navigation links however fetchAll would give me the data required for the navigation to be labelled correctly. I cannot work out where I am going wrong. Any help would be appreciated.
Edited October 31, 2020 by Skorpio Update with further information Hi Guys I am having trouble with a mysql regexp expression called through php. I am not sure but I suspect its to do with the {} in the mysql code and PHP parsing them incorrectly. Here is my code snippet: $q = mysql_real_escape_string($_POST['keyword']); $limit = 10; //limit number of responses from dictionary $remainder = 11 - strlen($q); if ($q) { $qy = "SELECT * FROM dict_list WHERE UCASE(word) <> UCASE('$q') AND (word REGEXP '^$q.{$remainder}') LIMIT $limit"; $query = mysql_query($qy); ... What I want to do is this: a user types in a word. I then want to query a dictionary table called dict_list for all matches of the this word up to 11 characters max. Example: if $q was the word aero then the response would be all words beginning with aero and up to a max of 11 characters. That is why IU thought I could calculate length of $q and from this get the $remainder = 11 - strlen($q) then in the REGEXP use .{$remainder} but when testing if I echo out the query $qy the curly braces will not show on screen. Any help would be greatly appreciated. I hope this is posted in correct location. Apologies if not. Thanks, Fergal. Here is my code: // Start MySQL Query for Records $query = "SELECT codes_update_no_join_1b" . "SET orig_code_1 = new_code_1, orig_code_2 = new_code_2" . "WHERE concat(orig_code_1, orig_code_2) = concat(old_code_1, old_code_2)"; $results = mysql_query($query) or die(mysql_error()); // End MySQL Query for Records This query runs perfectly fine when run direct as SQL in phpMyAdmin, but throws this error when running in my script??? Why is this??? Code: [Select] You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= new_code_1, orig_code_2 = new_code_2WHERE concat(orig_code_1, orig_c' at line 1 If you also have any feedback on my code, please do tell me. I wish to improve my coding base. Basically when you fill out the register form, it will check for data, then execute the insert query. But for some reason, the query will NOT insert into the database. In the following code below, I left out the field ID. Doesn't work with it anyways, and I'm not sure it makes a difference. Code: Code: [Select] mysql_query("INSERT INTO servers (username, password, name, type, description, ip, votes, beta) VALUES ($username, $password, $name, $server_type, $description, $ip, 0, 1)"); Full code: Code: [Select] <?php include_once("includes/config.php"); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title><? $title; ?></title> <meta http-equiv="Content-Language" content="English" /> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <link rel="stylesheet" type="text/css" href="style.css" media="screen" /> </head> <body> <div id="wrap"> <div id="header"> <h1><? $title; ?></h1> <h2><? $description; ?></h2> </div> <? include_once("includes/navigation.php"); ?> <div id="content"> <div id="right"> <h2>Create</h2> <div id="artlicles"> <?php if(!$_SESSION['user']) { $username = mysql_real_escape_string($_POST['username']); $password = mysql_real_escape_string($_POST['password']); $name = mysql_real_escape_string($_POST['name']); $server_type = mysql_real_escape_string($_POST['type']); $description = mysql_real_escape_string($_POST['description']); if(!$username || !$password || !$server_type || !$description || !$name) { echo "Note: Descriptions allow HTML. Any abuse of this will result in an IP and account ban. No warnings!<br/>All forms are required to be filled out.<br><form action='create.php' method='POST'><table><tr><td>Username</td><td><input type='text' name='username'></td></tr><tr><td>Password</td><td><input type='password' name='password'></td></tr>"; echo "<tr><td>Sever Name</td><td><input type='text' name='name' maxlength='35'></td></tr><tr><td>Type of Server</td><td><select name='type'> <option value='Any'>Any</option> <option value='PvP'>PvP</option> <option value='Creative'>Creative</option> <option value='Survival'>Survival</option> <option value='Roleplay'>RolePlay</option> </select></td></tr> <tr><td>Description</td><td><textarea maxlength='1500' rows='18' cols='40' name='description'></textarea></td></tr>"; echo "<tr><td>Submit</td><td><input type='submit'></td></tr></table></form>"; } elseif(strlen($password) < 8) { echo "Password needs to be higher than 8 characters!"; } elseif(strlen($username) > 13) { echo "Username can't be greater than 13 characters!"; } else { $check1 = mysql_query("SELECT username,name FROM servers WHERE username = '$username' OR name = '$name' LIMIT 1"); if(mysql_num_rows($check1) < 0) { echo "Sorry, there is already an account with this username and/or server name!"; } else { $ip = $_SERVER['REMOTE_ADDR']; mysql_query("INSERT INTO servers (username, password, name, type, description, ip, votes, beta) VALUES ($username, $password, $name, $server_type, $description, $ip, 0, 1)"); echo "Server has been succesfully created!"; } } } else { echo "You are currently logged in!"; } ?> </div> </div> <div style="clear: both;"> </div> </div> <div id="footer"> <a href="http://www.templatesold.com/" target="_blank">Website Templates</a> by <a href="http://www.free-css-templates.com/" target="_blank">Free CSS Templates</a> - Site Copyright MCTop </div> </div> </body> </html> I'm restarting this under a new subject b/c I learned some things after I initially posted and the subject heading is no longer accurate. What would cause this behavior - when I populate session vars from a MYSQL query, they stick, if I populate them from an MSSQL query, they drop. It doesn't matter if I get to the next page using a header redirect or a form submit. I have two session vars I'm loading from a MYSQL query and they remain, the two loaded from MSSQL disappear. I have confirmed that all four session vars are loading ok initially and I can echo them out to the page, but when the application moves to next page via redirect or form submit, the two vars loaded from MSSQL are empty. Any ideas? Hi, I have this code below which groups all the SubHeading together and then queries the same table to find RiskConsequence which are grouped that match SubHeading then to query this table one more last time with all the Risk Mitigation that matches the grouped RiskConsequence. Problem I get is it does the SubHeading, the RiskConsequences it only does one of them not all of them before it moves onto the RiskMitigation. I know I have a php coding issue just cant see the wood from the tree's as the queries work. Code: [Select] <?php include ("include.php"); $query = "SELECT * FROM tblriskassessmentdatabank GROUP BY SubHeading"; $results = mysql_query($query) or die("Error: " . mysql_error()); while($row1 = mysql_fetch_array($results)){ echo'<a href="#" onClick="return(changeDisplay(';echo"'";echo($row1[SubHeading]);echo"'))";echo'">';echo($row1[SubHeading]);echo'</a><br /><br />'; echo'<div id="';echo($row1[SubHeading]); echo'" class="HideText">'; $risksub = $row1[SubHeading]; $query1 = "SELECT * FROM tblriskassessmentdatabank GROUP By RiskConsequence"; $results1 = mysql_query($query1) or die("Error: " . mysql_error()); while($row2 = mysql_fetch_array($results1)){ echo'<a href="#" onClick="return(changeDisplay(';echo"'";echo($row2[RiskConsequence]);echo"'))";echo'">';echo($row2[RiskConsequence]);echo'</a><br />'; echo'<div id="';echo($row2[RiskConsequence]); echo'" class="HideText">'; $risksub1 = $row2[RiskConsequence]; $query1 = "SELECT * FROM tblriskassessmentdatabank WHERE RiskConsequence = '$risksub1'"; $results1 = mysql_query($query1) or die("Error: " . mysql_error()); while($row3 = mysql_fetch_array($results1)){ echo'<input name="checkbox[]" type="checkbox" id="checkbox[]" value="';echo($row3[IssueNumber]);echo'" /> <label for="checkbox[]"></label>';echo($row3[RiskMitigation]);echo'<br /><br />'; } echo'</div>'; } echo'</div>'; } ?> Hi everyone... My script register01.php isnt working as expected, it should take variables from register00.php and insert them into the db. It is currently re-loading itself and not inserting, could you take a look at this for me: register00.php Code: [Select] <form enctype="multipart/form-data" method="post" action="register01.php"> <table width="316" height="120" border="0"> <tr><td colspan=2><h1>Register/Sign Up</h1></td></tr> <tr><td>Company Name:</td><td> <input name="company_name" type="text" id="company_name"> </td></tr> <tr><td>Contact Name:</td><td> <input name="contact_name" type="text" id="contact_name"> </td></tr> <tr><td>Contact Number:</td><td> <input name="phone" type="number" id="phone" value="incl. area code"> </td></tr> <tr><td>Address line 1:</td><td> <input name="street1" type="text" id="street1"> </td></tr> <tr><td>Address line 2:</td><td> <input name="street2" type="text" id="street1"> </td></tr> <tr><td>Area:</td><td> <input name="location" type="text" id="location"> </td></tr> <tr><td>City:</td><td> <input name="city" type="text" id="city"> </td></tr> <tr><td>Postcode:</td><td> <input name="postcode" type="text" id="postcode"> </td></tr> <tr><td>Username:</td><td> <input name="username" type="text" id="username"> </td></tr> <tr><td>Password:</td><td> <input name="password" type="password" class="style7" id="password"> </td></tr> <tr><td>Email:</td><td> <input name="email" type="text" class="style7" id="email"> </td></tr> <tr><td>Company Logo:</td><td> <input name="upload" type="file" class="style7" id="upload"> </td></tr> <tr><td>Company Description:</td><td> <textarea rows="20" cols="50" name="premiumuser_description" id="premiumuser_description"></textarea> </td></tr> <tr><td> <input name="Submit" type="submit" value="Register" /> </td></tr> </table> register01.php Code: [Select] <?PHP session_start(); include('db.php'); /* set some validation variables */ $error_message = ""; /* DEFINE THE FUNCTION */ /* ============================================== */ /* ============================================== */ /* DO NOT MODIFY THIS FUNCTION */ function Resize_Image($save,$file,$t_w,$t_h,$s_path,$o_path) { $s_path = trim($s_path); $o_path = trim($o_path); $save = $s_path . $save; $file = $o_path . $file; $ext = strtolower(end(explode('.',$save))); list($width, $height) = getimagesize($file) ; if(($width>$t_w) OR ($height>$t_h)) { $r1 = $t_w/$width; $r2 = $t_h/$height; if($r1<$r2) { $size = $t_w/$width; }else{ $size = $t_h/$height; } }else{ $size=1; } $modwidth = $width * $size; $modheight = $height * $size; $tn = imagecreatetruecolor($modwidth, $modheight) ; switch ($ext) { case 'jpg': case 'jpeg': $image = imagecreatefromjpeg($file) ; break; case 'gif': $image = imagecreatefromgif($file) ; break; case 'png': $image = imagecreatefrompng($file) ; break; } imagecopyresampled($tn, $image, 0, 0, 0, 0, $modwidth, $modheight, $width, $height) ; imagejpeg($tn, $save, 100) ; return; } /* END OF RESIZE FUNCTION */ //This is the directory where images will be saved $target = "/home/users/web/b109/ipg.removalspacecom/images/COMPANIES/"; $target = $target . basename( $_FILES['upload']['name']); // Connects to your Database session_start(); include ('db.php'); //This gets all the other information from the form /* ============================================== */ /* ============================================== */ /* YOU NEED TO DO SOME VALIDATION AND SANITIZING OF YOUR FORM DATA */ if((!isset($_POST['company_name'])) || (strlen(trim($_POST['company_name'])) <5) || (trim($_POST['company_name']) != preg_replace("/[^a-zA-Z0-9\s\-\'\,\.\_]/", "", trim($_POST['company_name'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid company name<br>"; $error_message = $error_message . "Valid names are min 5 characters and use letters, numbers and underscores only.<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['company_name'] . "</font><hr>"; } /* END validating company_name */ /* =============================================== */ if((!isset($_POST['contact_name'])) || (strlen(trim($_POST['contact_name'])) <5) || (trim($_POST['contact_name']) != preg_replace("/[^a-zA-Z0-9\s\-\'\,\.\_]/", "", trim($_POST['contact_name'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid contact name<br>"; $error_message = $error_message . "Valid names are min 5 characters and use letters, numbers and underscores only.<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['contact_name'] . "</font><hr>"; } /* END validating contact_name */ /* =============================================== */ if((!isset($_POST['phone'])) || (strlen(trim($_POST['phone'])) <5) || (trim($_POST['phone']) != preg_replace("/[^0-9\s\-\_]/", "", trim($_POST['phone'])))) { /* if it is NOT set, then set the error variable and start building the error message */ $error_message = $error_message . "You must enter a valid phone<br>"; $error_message = $error_message . "Valid phones are min 5 characters and use letters, numbers and underscores only.<br>"; $error_message = $error_message . 'Your invalid phone was: <font color="red">' . $_POST['phone'] . "</font><hr>"; }else{ $phone = trim($_POST['phone']); } /* END validating phone */ /* =============================================== */ /* =============================================== */ /* validating the email */ /* create a function */ function validateEmailAddress($email) { return filter_var($email, FILTER_VALIDATE_EMAIL) && preg_match('/@.+\./', $email); } if(!isset($_POST['email']) || validateEmailAddress($_POST['email']) !=1) { $error_message = $error_message . "You must enter a valid email address<br>"; $error_message = $error_message . 'The invalid email was: <font color="red">' . $_POST['email'] . "</font><hr>"; } /* END validating email */ /* =============================================== */ if((!isset($_POST['street1'])) || (strlen(trim($_POST['street1'])) <5) || (trim($_POST['street1']) != preg_replace("/[^a-zA-Z0-9\s\-\'\,\.\_]/", "", trim($_POST['street1'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid address<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['street1'] . "</font><hr>"; } /* END validating street1 */ /* =============================================== */ if((!isset($_POST['street2'])) || (strlen(trim($_POST['street2'])) <5) || (trim($_POST['street2']) != preg_replace("/[^a-zA-Z0-9\s\-\'\,\.\_]/", "", trim($_POST['street2'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid address<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['street2'] . "</font><hr>"; } /* END validating street2 */ /* =============================================== */ if((!isset($_POST['premiumuser_description'])) || (strlen(trim($_POST['premiumuser_description'])) <5) || (trim($_POST['premiumuser_description']) != preg_replace("/[^a-zA-Z0-9\s\-\'\,\.\_]/", "", trim($_POST['premiumuser_description'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid address<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['premiumuser_description'] . "</font><hr>"; } /* END validating premiumuser_description */ /* =============================================== * /* =============================================== */ /* this section of code will set up an error message for the username if ANY of the conditions occur 1) checks to see if $_POST['username'] is NOT set 2) if length of username is less than 5 3) if username has anything other than letter, numbers or underscores */ if((!isset($_POST['username'])) || (strlen(trim($_POST['username'])) <5) || (trim($_POST['username']) != preg_replace("/[^a-zA-Z0-9\_]/", "", trim($_POST['username'])))) { /* if username is bad start building the error message */ $error_message = "You must enter a valid username<br>"; $error_message = $error_message . "Valid names are min 5 characters and use letters, numbers and underscores only.<br>"; $error_message = $error_message . 'Your invalid name was: <font color="red">' . $_POST['username'] . "</font><hr>"; } /* END validating username */ /* =============================================== */ /* =============================================== */ /* this section of code will set up an error message for the password if ANY of the conditions occur 1) checks to see if $_POST['upassword'] is NOT set 2) if length of upassword is less than 5 3) if upassword has anything other than letter, numbers or underscores */ if((!isset($_POST['password'])) || (strlen(trim($_POST['password'])) <5) || (trim($_POST['password']) != preg_replace("/[^a-zA-Z0-9\_]/", "", trim($_POST['password'])))) { /* if it is NOT set, then set the error variable and start building the error message */ $error_message = $error_message . "You must enter a valid password<br>"; $error_message = $error_message . "Valid passwords are min 5 characters and use letters, numbers and underscores only.<br>"; $error_message = $error_message . 'Your invalid password was: <font color="red">' . $_POST['password'] . "</font><hr>"; }else{ $password = trim($_POST['password']); } /* END validating password */ /* =============================================== */ /* =============================================== */ /* check to see if username is already taken */ $username = mysql_real_escape_string(trim($_POST['username'])); $query1 = "SELECT username from companies WHERE username = '$username'"; $result1 = mysql_query($query1) or die(mysql_error()); $count = mysql_num_rows($result1); if($count>0) { $error_message = $error_message . 'The username: <font color="red">' . $_POST['username'] . "</font> is taken.<hr>"; } /* =============================================== */ /* if any of the post variables are invalid */ /* set the session variable and send back to the form page */ if(strlen(trim($error_message))>0) { $_SESSION['error_message'] =$error_message; header("Location: register00.php"); exit(); } /* =============================================== */ $uploadDir = 'images/COMPANIES'; /* main picture folder */ $max_height = 450; /* largest height you allowed; 0 means any */ $max_width = 450; /* largest width you allowed; 0 means any */ $max_file = 2000000; /* set the max file size in bytes */ $image_overwrite = 1; /* 0 means overwite; 1 means new name */ /* add or delete allowed image types */ $allowed_type01 = array( "image/gif", "image/pjpeg", "image/jpeg", "image/png", "image/x-png", "image/jpg"); $do_thumb = 1; /* 1 make thumbnails; 0 means do NOT make */ $thumbDir = "/images/thumbs"; /* thumbnail folder */ $thumb_prefix = ""; /* prefix for thumbnails */ $thumb_width = 90; /* max thumb width */ $thumb_height = 70; // max thumb height //Writes the photo to the server if(move_uploaded_file($_FILES['upload']['tmp_name'], $target)) { /* HERE IS WHERE WE WILL DO THE ACTUAL RESIZING */ /* ============================================== */ /* ============================================== */ /* THESE SIX PARAMETERS MAY BE CHANGED TO SUIT YOUR NEEDS */ $o_path ="images/COMPANIES/"; $s_path = "images/thumbs/"; $file = $upload; $save = $file; $t_w = 200; $t_h = 150; /* ============================================== */ /* ============================================== */ /* DO NOT CHANGE THIS NEXT LINE */ Resize_Image($save,$file,$t_w,$t_h,$s_path,$o_path); //Tells you if its all ok /* ============================================== */ /* ============================================== */ /* PROVIDE A WAY FOR THEM TO GO SOMWHERE */ echo "The file ". $file . " has been uploaded, and your information has been added to the directory"; }else { //Gives and error if its not /* ============================================== */ /* ============================================== */ /* PROVIDE A WAY FOR THEM TO GO SOMWHERE */ echo "Sorry, there was a problem uploading your file."; } /* =============================================== */ /* PREPARE DATA FOR INSERTION INTO TABLE */ /* FUNCTION TO CREATE SALT */ function createSalt() { $string = md5(uniqid(rand(), true)); return substr($string, 0, 3); } //Writes the information to the database /* ============================================== */ /* ============================================== */ /* ALWAYS WRITE YOUR QUERIES AS STRINGS THAT WAY WHEN TESTING, YOU CAN MAKE SURE THAT THE VALUES CONTAIN WHAT YOU EXPECT */ $salt = createsalt(); $passwod = trim($_POST['password']); $hash = hash('sha256', $salt, $password); $approved = 0; $username = mysql_real_escape_string(trim($_POST['username'])); $email = mysql_real_escape_string(trim($_POST['email'])); $query ="INSERT INTO `companies` (company_name, contact_name, location, postcode, street1, street2, city, phone, email, basicpackage_description, premiumuser_description, password, salt, approved, upload) VALUES ('$company_name', '$contact_name', '$location', '$postcode', '$street1', '$street2', '$city', '$phone', '$email', '$basicpackage_description', '$premiumuser_description', '$password', '$salt', '$approved', '$upload')"; $result = mysql_query($query) or die(mysql_error()); /* =============================================== */ /* at this point we can send an email to the admin as well as the user. DO NOT send the user's password to ANYONE!!!! */ ?> Thank you for registering.<br>; Your account will be approved and activated within 24 hours.<br><br> Click here to return to the <a href="index.php">main page</a>. Hello!
I have a php page which shows a list of customers displayed in an html table format, The first column in the table contains a link for the user to select the row which then navigates to another php page, which is the customer order page. On this page, I want to get certain information based on the name of the customer to prepopulate the customer fields on this form, so I have some php code near the top of the page, as per attached document.
I have checked to ensure that the $_GET['business_name'] contains a value. The query runs fine in myssql and returns only one record when I provide a value for the business_name, however when I run the code in php, the $result variable shows 'Resource id ='7' type='mySQL result'.
I am a total newbie on PHP/MySQL and inherited this application. I have tried to find solutions on line through various forums, but no luck. Perhaps I am not asking/looking for the right question.
Anyway, any assistance would be greatly appreciated.
Attached Files
customer_order_php.php 648bytes
1 downloads I'm very new to php and mysql so this might be a very stupid question and I'm apologizing ahead of time. Anyway I have a page titled Apparel.php that is supposed to show the most recent item uploaded from each of it's subpages. In other word Apparel is the $category and it has 4 $subcategories (Dresses.php, Skirts.php, Coats.php and Shorts.php). I was able to successfully have the right items show but my coding is pretty long, which I think may affect the speed of the page from loading. I'm sure there's a way to shorten it by perhaps using just one query but I can't figure out how. I'm actually using 4 queries but only posted 2 to keep it shorter. Thanks ahead of time! Code: [Select] <?php // Run a select query to get latest item from each subcategory $dynamicList = ""; $query1 = mysql_query("SELECT * FROM products WHERE category='Apparel' AND subcategory='Dresses' ORDER BY date_added DESC LIMIT 1"); $query2 = mysql_query("SELECT * FROM products WHERE category='Apparel' AND subcategory='Skirts' ORDER BY date_added DESC LIMIT 1"); $productCount = mysql_num_rows($query1); // count the output amount while($row = mysql_fetch_array($query1)){ $id = $row["id"]; $product_name = $row["product_name"]; $subcategory = $row["subcategory"]; $dynamicList .= ' <ul> <li><a href="Apparel/' . $subcategory . '.php"><img src="inventory_images/' . $id . '_1.jpg" alt="' . $product_name . '" width="140" height="210" border="0" /></a> <center><h3>' . $subcategory . '</h3></center> </li> </ul>'; } $productCount = mysql_num_rows($query2); // count the output amount while($row = mysql_fetch_array($query2)){ $id = $row["id"]; $product_name = $row["product_name"]; $subcategory = $row["subcategory"]; $dynamicList .= ' <ul> <li><a href="Apparel/' . $subcategory . '.php"><img src="inventory_images/' . $id . '_1.jpg" alt="' . $product_name . '" width="140" height="210" border="0" /></a> <center><h3>' . $subcategory . '</h3></center> </li> </ul>'; } mysql_close(); ?> MOD EDIT: [code] . . . [/code] BBCode tags added. Hi Guys, I'm hoping someone can find what I clearly cant see, I have a page meant to update database records, the page will load and populate with the existing data and allow 5 out of the 7 fields to be edited, however when editing any of those 5, the remaining 2 blank out and can't be filled in again. Im at a bit of loss and have been staring at it for a bit too long i think, hoping a fresh set of eyes can help. Here's the page (the fields I'm having issues with are inv1/inv2: <?php $page_title = 'Edit a Cart'; include ('style.html'); // Check for a valid ID, through GET or POST. if ( (isset($_GET['id'])) ) { // Accessed through active_search.php $id = $_GET['id']; } elseif ( (isset($_POST['id'])) ) { // Form has been submitted. $id = $_POST['id']; } else { // No valid ID, kill the script. echo '<div id="title">Page Error</div> <p class="error">This page has been accessed in error.</p><p><br /><br /></p>'; exit(); } require_once ('mysql_connect.php'); // Connect to the db. // Check if the form has been submitted. if (isset($_POST['submitted'])) { $errors = array(); // Initialize error array. // Check for a PO. { $po = trim($_POST['po']); } // Check for a Master Serial. { $sr = trim($_POST['serial']); } // Check for a Charger Serial. { $ch = trim($_POST['charger']); } // Check for a Battery Serial. { $bt1 = trim($_POST['battery1']); } // Check for a Battery Serial. { $bt2 = trim($_POST['battery2']); } // Check for a Inverter Serial. { $in1 = trim($_POST['inv1']); } // Check for a 2nd Inverter Serial. { $in2 = trim($_POST['inv2']); } // Check for a Radio Serial. { $abc = trim($_POST['abc']); } if (empty($errors)) { // If everything's OK. // Test for unique master serial. $query = "SELECT serial FROM serials WHERE serial='$id'"; $result = mysql_query($query); if (mysql_num_rows($result) == 1) { // Make the query. $query = "UPDATE serials SET po='$po', serial='$sr', charger='$ch', batt1='$bt1', batt2='$bt2', inv1='$in1', inv2='$in2', abc='$abc' WHERE serial='$id'"; $result = @mysql_query ($query); // Run the query. if (mysql_affected_rows() == 1) { // If it ran OK. // Print a message. echo '<div id="title">Success!</div> <p>The node has been edited.<a href="javascript:window.close();">Close</a></p><p><br /><br /></p>'; } else { // If it did not run OK. echo '<div id="title">System Error</div> <p class="error">The node could not be edited due to a system error. We apologize for any inconvenience.</p>'; // Public message. echo '<p>' . mysql_error() . '<br /><br />Query: ' . $query . '</p>'; // Debugging message. exit(); } } else { // Already registered. echo '<div id="title">Error!</div> <p class="error">The Serial has already been registered.</p>'; } } else { // Report the errors. echo '<div id="title">Error!</div> <p class="error">The following error(s) occurred:<br />'; foreach ($errors as $msg) { // Print each error. echo " - $msg<br />\n"; } echo '</p><p>Please try again.</p><p><br /></p>'; } // End of if (empty($errors)) IF. } // End of submit conditional. // Always show the form. // Retrieve the user's information. $query = "SELECT * FROM serials WHERE serial='$id'"; $result = @mysql_query ($query); // Run the query. if (mysql_num_rows($result) == 1) { // Valid ID, show the form. // Get the user's information. $row = mysql_fetch_array ($result); // Create the form. echo '<div id="title">Edit a Cart</div> <form action="serial_edit.php" method="post"> <table width="100%" border="0" cellspacing="0" cellpadding="0"> <tr> <td>P.O #:</td><td><input type="text" name="po" size="15" maxlength="15" value="' . $row['po'] . '" /></td> </tr> <tr> <td>Cart Serial:</td><td><input type="text" name="serial" size="15" maxlength="30" value="' . $row['serial'] . '" /></td> </tr> <tr> <td>Charger:</td><td><input type="text" name="charger" size="20" maxlength="40" value="' . $row['charger'] . '" /> </td> </tr> <tr> <td>Battery 1:</td><td><input type="text" name="battery1" size="20" maxlength="40" value="' . $row['batt1'] . '" /> </td> </tr> <tr> <td>Battery 2:</td><td><input type="text" name="battery2" size="20" maxlength="40" value="' . $row['batt2'] . '" /> </td> </tr> <tr> <td>Inverter 1:</td><td><input type="text" name="inverter1" size="20" maxlength="40" value="' . $row['inv1'] . '" /> </td> </tr> <tr> <td>Inverter 2:</td><td><input type="text" name="inverter2" size="20" maxlength="40" value="' . $row['inv2'] . '" /> </td> </tr> <tr> <td>ABC:</td><td><input type="text" name="abc" size="20" maxlength="40" value="' . $row['abc'] . '" /> </td> </tr> <tr> <td><input type="submit" name="submit" value="Submit" /><input type="hidden" name="submitted" value="TRUE" /></td> <td><input type="hidden" name="id" value="' . $id . '" /></td></tr> </form>'; } else { // Not a valid ID. echo '<div id="title">Page Error</div> <p class="error">This page has been accessed in error.</p><p><br /><br /></p>'; } mysql_close(); // Close the database connection. ?> I've actually ported the query below from something else I've done that works. Not sure what I'm missing.
Here are the errors I'm getting: Quote
Warning: mysqli_query() expects parameter 1 to be mysqli, null given in /home2/csi/public_html/resources/preview1920/functions.php on line 9
$query = "SELECT id FROM a_sectionals_bkb";
$results = mysqli_query($con,$query); //=> Line 9
echo mysqli_error($results); //=> Line 11
echo '<div class="sectional_select">';
echo '<form name="Sectionals">';
echo '<select name="sectional" size="3" onChange="go()">';
echo '<option value="NULL">Select Sectional</option>';
while($row = mysqli_fetch_assoc($results)) {
echo '<option value="/season-preview/19-20/sectional1920/?sectional='. $row['id'] .'">Sectional '. $row['id'].'</option>';
}
echo '</select>';
// End Sectional Select
echo '</div>';
// End of Sectional Select Function
in database, I have faced error where query does not responded properly
it was showing the error message that "too much query, user cannot execute more query"....
when I increased the limit, it works for sometime and after sometime, it again generates the error , my question here is:
"why the error is occurring ?"
"what is the correct way to improve the execution of multiple queries at single instance ??? "
Its the Code: [Select] $query = "INSERT INTO hitlist hit_id = ($addIDs_str), player_id = '$playerID'"; Thats the issue, my codes below i cannot figure out how to insert the results, any help would be appreciated Thanks Code: [Select] if (isset($_POST["submit"]) && $_POST["submit"] == "Recall Selected Informants") { //Force POST values to be INTs $addIDs_ary = array_map('intval', $_POST['chkInv']); //Remove any 'false' value $addIDs_ary = array_filter($addIDs_ary); //Check that there was at least one valid value if(count($addIDs_ary)) { //Create comma separated string of the IDs $addIDs_str = implode(',', $addIDs_ary); //Create and run one query to perform all the adds (of the user) $query = "INSERT INTO hitlist hit_id = ($addIDs_str), player_id = '$playerID'"; $sql = "UPDATE players SET Informants = Informants - 1 WHERE id = '$playerID'"; mysql_query($sql) or die(mysql_error()); if(mysql_query($query)) { $selectedCount = count($addIDs_ary); $adddCount = mysql_affected_rows(); echo "{$adddCount} of {$selectedCount} Investigated player(s) were successfully Removed."; if($adddCount != $selectedCount) { echo " You do not have rights to the others."; } }else{ echo "There was a problem running the query.<br>" . mysql_error(); } }else{ echo "Invalid ID data passed."; } } Hi All, Just a couple of things with my site search, I am having trouble getting the search results to pickup any and all keywords. For example, if keywords for a search result are listed in the keywords column of my db as 'one, two, three' a search query for 'one two' is fine but a search for 'one three' will not display the search result. Instead of treating the keywords seperately it is treating all keywords as a whole phrase. How can I make the search results pickup any keyword regardless of order. Secondly I'm having trouble getting the search results to display by keyword relevance, any help is greatly appreciated. Thanks. Code: [Select] function search() { parent::Controller(); $this->load->model('Templating'); $this->load->model('Company'); } function index() { $this->load->view('search'); } function search_redirect() { if ($_POST['keyword'] == '') $_POST['keyword'] = 'Keyword'; redirect('search/showlist/'. urlencode(underscore($_POST['location'])).'/'. urlencode(underscore($_POST['category'])).'/'. urlencode(underscore($_POST['keyword']))); } function showlist($location = 'any', $category = 'any', $keyword = 'keyword', $offset = '0') { /* get results */ $data['companies'] = $this->Company->search($keyword, $category, $location, $offset, $name); /* paginate results */ $row = $data['companies']->row(); if($keyword == 'keyword' and $category=='any' ) { $data['categoryList'] = $this->buildCategoryList($location); } elseif(isset($row->categoryId)) { $categoryId = $row->categoryId; $data['linkList'] = $this->buildRefineList($categoryId); } $this->load->library('pagination'); $config['base_url'] = site_url().'search/showlist/'.$location.'/'.$category.'/'.$keyword.'/'; $config['total_rows'] = $this->Company->total_companies; $config['per_page'] = $this->Company->per_page; $config['num_links'] = 3; $config['uri_segment'] = $this->uri->total_segments(); $this->pagination->initialize($config); $data['pagination'] = $this->pagination->create_links(); $data['logged_in'] = $this->session->userdata('logged_in'); $data['company_id'] = $this->session->userdata('company_id'); $data['search_category'] = $category; $data['search_location'] = $location; if ($this->session->userdata('admin') != ''){ $data['admin'] = $this->session->userdata('admin'); } /* initialise template settings */ $center = 'center/list_companies'; $this->load->vars($data); $this->Templating->show($center); } Hello, I have a query where i try to search, but i want to put a limitation, but it doesn't seems to be working :/ Here's my code: $result = mysql_query("SELECT * FROM clients WHERE staff = 0 AND username LIKE '%" . $keyword . "%' OR company LIKE '%" . $keyword . "%' ORcontact LIKE '%" . $keyword . "%' OR address LIKE '%" . $keyword . "%' OR email LIKE '%" . $keyword . "%' OR phone LIKE '%" . $keyword . "%' ORDER BY phone"); Alright, so i basically want the user to search in all of those fields, however i want it to filter all "staff" members, so it should only view the "0" ones, meaning the clients, only problem that when i run this, all clients gets displayed, also the staff accounts. Any suggestion? |
|||||||