|
PHP - Help Tweaking League Standings Query
I have finally worked out how to get a football league table query up and running (mainly by stealing code from elsewhere and adapting it to work the way I want it to!) but need to try to tweak it for a couple of other pages.
The test page with it on is at http://www.margate-fc.com/content/test/table.php The query is $i = 1; $ht = "g.home_team = t.team_id"; $at = "g.away_team = t.team_id"; $hw = "g.home_goals > g.away_goals"; $aw = "g.home_goals < g.away_goals"; $d = "g.home_goals = g.away_goals"; $hg ="g.home_goals"; $ag ="g.away_goals"; $table = mysql_query("SELECT t.team_name as Tm, @rownum := @rownum+1 AS rank , (sum(CASE WHEN (".$ht." AND ".$hw.")OR(".$at." AND ".$aw.") THEN 3 ELSE 0 END) + sum(CASE WHEN (".$ht." OR ".$at.") AND ".$d." THEN 1 ELSE 0 END)) AS P , (sum(CASE WHEN (".$ht." AND ".$hw.") THEN 3 ELSE 0 END) + sum(CASE WHEN (".$ht.") AND ".$d." THEN 1 ELSE 0 END)) AS HP , (sum(CASE WHEN (".$at." AND ".$aw.") THEN 3 ELSE 0 END) + sum(CASE WHEN (".$at.") AND ".$d." THEN 1 ELSE 0 END)) AS AP , count(CASE WHEN (".$ht." OR ".$at.") THEN 1 ELSE 0 END) as GP , sum(CASE WHEN (".$ht." ) THEN 1 ELSE 0 END) as HGP , sum(CASE WHEN ".$at." THEN 1 ELSE 0 END) as AGP , sum(CASE WHEN (".$ht." AND ".$hw.") OR (".$at." AND ".$aw.") THEN 1 ELSE 0 END) AS W , sum(CASE WHEN (".$ht." AND ".$hw.") THEN 1 ELSE 0 END) AS HW , sum(CASE WHEN (".$at." AND ".$aw.") THEN 1 ELSE 0 END) AS AW , sum(CASE WHEN (".$ht." AND ".$d.") OR (".$at." AND ".$d.") THEN 1 ELSE 0 END) AS D , sum(CASE WHEN (".$ht." AND ".$d.") THEN 1 ELSE 0 END) AS HD , sum(CASE WHEN (".$at." AND ".$d.") THEN 1 ELSE 0 END) AS AD , sum(CASE WHEN (".$ht." AND ".$aw.") OR (".$at." AND ".$hw.") THEN 1 ELSE 0 END) AS L , sum(CASE WHEN (".$ht." AND ".$aw.") THEN 1 ELSE 0 END) AS HL , sum(CASE WHEN (".$at." AND ".$hw.") THEN 1 ELSE 0 END) AS AL , SUM(CASE WHEN (".$ht.") THEN ".$hg." WHEN (".$at.") THEN ".$ag." END) as GF , SUM(CASE WHEN (".$ht.") THEN ".$hg." END) as HGF , SUM(CASE WHEN (".$at.") THEN ".$ag." END) as AGF , SUM(CASE WHEN (".$ht.") THEN ".$ag." WHEN (".$at.") THEN ".$hg." END) as GA , SUM(CASE WHEN (".$ht.") THEN ".$ag." END) as HGA , SUM(CASE WHEN (".$at.") THEN ".$hg." END) as AGA , (SUM(CASE WHEN (".$ht.") THEN ".$hg." WHEN (".$at.") THEN ".$ag." END) - SUM(CASE WHEN (".$ht.") THEN ".$ag." WHEN (".$at.") THEN ".$hg." END)) as GD , (SUM(CASE WHEN (".$ht.") THEN ".$hg." END) - SUM(CASE WHEN (".$ht.") THEN ".$ag." END)) as HGD , (SUM(CASE WHEN (".$at.") THEN ".$ag." END) - SUM(CASE WHEN (".$at.") THEN ".$hg." END)) as AGD from teams t left join all_games g on t.team_id in (g.home_team,g.away_team) WHERE comp = '1' AND home_goals IS NOT NULL AND date BETWEEN '2010-07-01' AND '2011-06-31' GROUP BY t.team_id ORDER BY P desc, GD desc, GF desc and the html (although some of the css still is not done and some code still needs tidying) is Code: [Select] <table width="" border="0" cellpadding="0" cellspacing="0" BORDER=1 RULES=ROWS FRAME=BOX> <tr> <td></td><td></td> <td colspan="9" align="center" bgcolor="#00FF99">ALL</td> <td colspan="9" align="center" >Home</td> <td colspan="9" align="center">Away</td> </tr> <tr> <td class="hdcell" >POS</td> <td class="hdcell" >Team</td> <td width="30" class="hdcell">P</td> <td width="30" class="hdcell">W</td> <td width="30" class="hdcell">D</td> <td width="30" class="hdcell">L</td> <td width="30" class="hdcell">F</td> <td width="30" class="hdcell">A</td> <td width="30" class="hdcell">GD</td> <td width="30" class="hdcell">Pts</td> <td width="30" class="hdcell"></td> <td></td> <td width="30" class="hdcell">P</td> <td width="30" class="hdcell">W</td> <td width="30" class="hdcell">D</td> <td width="30" class="hdcell">L</td> <td width="30" class="hdcell">F</td> <td width="30" class="hdcell">A</td> <td width="30" class="hdcell">GD</td> <td width="30" class="hdcell">Pts</td> <td></td> <td width="30" class="hdcell">P</td> <td width="30" class="hdcell">W</td> <td width="30" class="hdcell">D</td> <td width="30" class="hdcell">L</td> <td width="30" class="hdcell">F</td> <td width="30" class="hdcell">A</td> <td width="30" class="hdcell">GD</td> <td width="30" class="hdcell">Pts</td> </tr> <?php while ($row_table = mysql_fetch_assoc($table)){ echo '<tr> <td style="text-align:left" width="30">'.$i.'</td>'; echo '<td style="text-align:left">'.$row_table['Tm'].'</td> <td style="text-align:left">'.$row_table['GP'].'</td> <td style="text-align:left">'.$row_table['W'].'</td> <td style="text-align:left"> '.$row_table['D'].'</td> <td style="text-align:left"> '.$row_table['L']. '</td> <td style="text-align:left"> '.$row_table['GF']. '</td> <td style="text-align:left"> '.$row_table['GA']. '</td> <td style="text-align:left"> '.$row_table['GD']. '</td> <td style="text-align:left"> '.$row_table['P']. '</td> <td style="text-align:left"></td> <td style="text-align:left"></td> <td style="text-align:left">'.$row_table['HGP'].'</td> <td style="text-align:left">'.$row_table['HW'].'</td> <td style="text-align:left">'.$row_table['HD'].'</td> <td style="text-align:left"> '.$row_table['HL']. '</td> <td style="text-align:left"> '.$row_table['HGF']. '</td> <td style="text-align:left"> '.$row_table['HGA']. '</td> <td style="text-align:left"> '.$row_table['HGD']. '</td> <td style="text-align:left"> '.$row_table['HP']. '</td> <td style="text-align:left"></td> <td style="text-align:left">'.$row_table['AGP'].'</td> <td style="text-align:left">'.$row_table['AW'].'</td> <td style="text-align:left">'.$row_table['AD'].'</td> <td style="text-align:left"> '.$row_table['AL']. '</td> <td style="text-align:left"> '.$row_table['AGF']. '</td> <td style="text-align:left"> '.$row_table['AGA']. '</td> <td style="text-align:left"> '.$row_table['AGD']. '</td> <td style="text-align:left"> '.$row_table['AP']. '</td> </tr>'; $i++; } ?> </table> As I said, this works fine in the test page but there are two other things that I am looking to do with it and one way I hope to streamline the code. Firstly the code bit..... There is a bit of replication that I was hoping to eliminate by using the sum function but from what I can see this cannot be done with Alias's. I was hoping to change the code , sum(CASE WHEN (".$ht." AND ".$hw.") OR (".$at." AND ".$aw.") THEN 1 ELSE 0 END) AS W , sum(CASE WHEN (".$ht." AND ".$hw.") THEN 1 ELSE 0 END) AS HW , sum(CASE WHEN (".$at." AND ".$aw.") THEN 1 ELSE 0 END) AS AW to , sum(HW + PW) AS W , sum(CASE WHEN (".$ht." AND ".$hw.") THEN 1 ELSE 0 END) AS HW , sum(CASE WHEN (".$at." AND ".$aw.") THEN 1 ELSE 0 END) AS AW but that just causes no records to be shown. Is there a way around this or is there no way to aggregate alias's? Secondly, the other pages. There are 2 other pages that I want to use similar data on and I think what I want to do is quite simple. On the front page of the site I want a stripped down version of the table which shows just five records, that of my team, Margate, and the two positions above and two below. At the moment Margate are in 19th position so I would want it to show rows 17,18,19,20,21. If Margate were 10th I would want it to show 8,9,10,11,12. I would imagine that there is a way of finding which position Margate is in then setting the OFFSET to that -2 but after extensive Googling (I did spot it in exactly the context I need some time back when I did not need it!) I cannot find anything as I basically do not know what I need to ask for! The final thing is that each team has its own page and on that page I want to show their position in the League in a friendly style, such as 19th as opposed to 19. I would imagine that I would need to pull the whole league table in as opposed to using a query that matches the team otherwise it would only have one result and each team would show as being 1st. I would only want to show the position of the relevant team but obviously the whole query would need to be run to get that position. How would I then find the relative teams position? I think that the ideal thing would be to use a VIEW but am working with a MySQL 4 database. Any help or advice will, as always, be appreciated. Thanks in advance Steve Similar TutorialsI'm putting some code that works with one database into a new website. Problem is the 2nd database has a bit of a different structure than the 1st so I need to make some changes. In the 1st database, I'm calling 2 different values that are contained in 1 row. In the 2nd database, I'm trying to call 2 values, but they are in different rows so I need to change my SELECT statement. This is the code that works in database 1: Code: [Select] $result = mysql_query(" SELECT S.game_id, TH.team_name AS HomeTeam, TA.team_name AS AwayTeam FROM schedule AS S JOIN teams AS TH ON S.team = TH.team_id JOIN teams AS TA ON S.team = TA.team_id WHERE S.week_id = '$weekID' ORDER BY S.game_id;"); while ($row = mysql_fetch_array($result)) { printf('<input type="text" size="4" name="spread[%d][%d][A]">', $weekID, $row['game_id']); printf(" %s vs. %s ", $row['AwayTeam'], $row['HomeTeam']); printf('<input type="text" size="4" name="spread[%d][%d][H]">', $weekID, $row['game_id']); } The 2nd database has one field to hold the team name and another field (place_id) to hold a single letter (H or A) to signify whether a team is Home or Away. (the 1st database has "A_team" and "H_team" fields in the same row.) They both use the tables "teams" and "schedule". Can I alter this code to look at 2 rows (place_id="H" and place_id="A") for the values without having to create 2 queries? Thanks. I would like to publish the sports standings (MLB, NHL, NFL, NBA) on a client website. I have not been able to find an RSS feed for standings from any of the leagues themselves. There are "widgets" and "Google gadgets" that do it but they don't look very good and they don't allow me to format them very well. Is there a way for me to grab the standings from a web page using PHP? Or does anyone know of a source that provides this information via RSS? Thank you! I have a query at the moment that gives a name, number of rides and number of points
SELECT COUNT( `points` ) AS 'rides', SUM( `points` ) AS 'pts', rider_name FROM tbl_heat WHERE card_id = $card GROUP BY `rider_name` ORDER BY pts DESCwhat I want to do now is add the position in a league table, I have tried amending the query and have the following SELECT @serial := @serial +1 AS pos, rider_name FROM( SELECT COUNT( `points` ) AS 'rides', SUM( `points` ) AS 'pts', rider_name FROM tbl_heat JOIN ( SELECT @serial :=0 ) AS init WHERE card_id = $card GROUP BY `rider_name` ORDER BY pts DESC ) as sortedhowever this query doesn't give what I am after, not sure how far off getting it right, any help would be great I have this code:
<td><form action="" method="post" name="TableData" class="style5" id="TableData"> <table width="800" border="0" bordercolor="#000000" background="Assets/Tablebar.gif"> <!--DWLayoutTable--> <tr> <td width="183" height="20" align="center"><div align="center" class="style11 style1"></div></td> <td width="317" align="center"><div align="center" class="style11"><span class="style2"><?php echo $row_TableData['UserID']; ?></span></div></td> <td width="136" align="center"><div align="center" class="style11"><span class="style2"><?php echo $row_TableData['UserName']; ?></span></div></td> <td width="136" align="center"><div align="center" class="style2 style11"><span class="style11"><span class="style2"><?php echo $row_TableData['Score']; ?></span></span></div></td> <td width="103" align="center" valign="top"><span class="style2 style11"> <?php for($i = 0; $i < $row_TableData['TourWins']; $i++) { echo '<img src="Assets/Medal.gif" />'; } ?> </span></td> </tr> </table> </form> </td> The Table displays fine and it sorts fine win Highest to lowest score, I am wanting to put place numbers Like 1,2,3,4 etc in the first Colom which is in bold, but I don't know what to use. any help would be great. Hi All I am trying to insert a feed on my site that automatically updates the football league etc like this one http://news.bbc.co.uk/sport1/hi/football/eng_div_1/table/default.stm is there a way to do this please? thanks Hi all, this is my first post on this site. I've built a few amateur sites in the past but am keen to utilize php combined with mysql for my current project. However, I have little knowledge of php and am just picking it up as I go (same way I've done for all my computer knowledge) What I'm looking for may sound simple, but I really don't know where to start and I'm hoping there are some kind souls here that will lend a hand. SQL Database Name Score John 42 Peter 46 Michael 56 Angela 46 (many rows like this) I am looking to output on my page a table of the top ten scores like this. However it's not quite that simple, should there be a tie on any score I want it to appear like so: 1. Michael 56 2. Angela 46 Peter 46 4. John 42 (onwards to 10) I want this to run from positions 1 thru 10, but should the 10th score in the database be equal to the 11th (12th, 13th etc) I would like them displayed too. For example: 9. Rafael 31 10. Sandy 29 Bernard 29 Jackie 29 Is this possible or would I be better off just sorting the info in excel and hard coding the info everytime? Hope somebody can help. Thanks in advance. Is there a way that I can tweak the following code so that the root nodes have different names? At the moment the xml file is creating a root node for each booking called booking so when I take the xml into flash it is calling it badly formed xml due to the repitition of <booking></booking> //sql_query $table_id = 'booking'; $query = "SELECT * FROM $table_id WHERE (booking.bookingDate = curDate()) AND roomID = 1 ORDER BY startTime"; $room1 = mysql_query($query); //create a new DOM document $doc = new DOMDocument('1.0'); //create root element $root = $doc->createElement('root'); $root = $doc->appendChild($root); //process one row at at time while($row = mysql_fetch_assoc($room1)){ //add node for each row $occ = $doc->createElement($table_id); $occ = $doc->appendChild($occ); //add achild for each field foreach ($row as $fieldname => $fieldvalue){ $child = $doc->createElement($fieldname); $child = $occ->appendChild($child); $value = $doc->createTextNode($fieldvalue); $value = $child->appendChild($value); } } $xml_string = $doc->saveXML(); echo $xml_string; mysql_free_result($room1); ?> Help wanted with tweaking PHP script
Hi Everyone, I was looking for some direction on how to go about this. A client has asked to set up a small league table with 12 teams where simply they can add fixtures and the result of that fixture. So pending on what the result is if they win they get 2 points and if they loose they get nothing and this will determine what position they are in the league table. Any help on this matter would be greatly appreciated even a small step in the right direction Thanks Barry Here is my code: // Start MySQL Query for Records $query = "SELECT codes_update_no_join_1b" . "SET orig_code_1 = new_code_1, orig_code_2 = new_code_2" . "WHERE concat(orig_code_1, orig_code_2) = concat(old_code_1, old_code_2)"; $results = mysql_query($query) or die(mysql_error()); // End MySQL Query for Records This query runs perfectly fine when run direct as SQL in phpMyAdmin, but throws this error when running in my script??? Why is this??? Code: [Select] You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= new_code_1, orig_code_2 = new_code_2WHERE concat(orig_code_1, orig_c' at line 1 Hello all,
Based on the suggestion of you wonderful folks here, I went away for a few days (to learn about PDO and Prepared Statements) in order to replace the MySQLi commands in my code. That's gone pretty well thus far...with me having learnt and successfully replaced most of my "bad" code with elegant, SQL-Injection-proof code (or so I hope).
The one-and-only problem I'm having (for now at least) is that I'm having trouble understanding how to execute an UPDATE query within the resultset of a SELECT query (using PDO and prepared statements, of course).
Let me explain (my scenario), and since a picture speaks a thousand words I've also inlcuded a screenshot to show you guys my setup:
In my table I have two columns (which are essentially flags i.e. Y/N), one for "items alreay purchased" and the other for "items to be purchased later". The first flag, if/when set ON (Y) will highlight row(s) in red...and the second flag will highlight row(s) in blue (when set ON).
I initially had four buttons, two each for setting the flags/columns to "Y", and another two to reverse the columns/flags to "N". That was when I had my delete functionality as a separate operation on a separate tab/list item, and that was fine.
Now that I've realized I can include both operations (update and delete) on just the one tab, I've also figured it would be better to pare down those four buttons (into just two), and set them up as a toggle feature i.e. if the value is currently "Y" then the button will set it to "N", and vice versa.
So, looking at my attached picture, if a person selects (using the checkboxes) the first four rows and clicks the first button (labeled "Toggle selected items as Purchased/Not Purchased") then the following must happen:
1. The purchased_flag for rows # 2 and 4 must be switched OFF (set to N)...so they will no longer be highlighted in red.
2. The purchased_flag for row # 3 must be switched ON (set to Y)...so that row will now be highlighted in red.
3. Nothing must be done to rows # 1 and 5 since: a) row 5 was not selected/checked to begin with, and b) row # 1 has its purchase_later_flag set ON (to Y), so it must be skipped over.
Looking at my code below, I'm guessing (and here's where I need the help) that there's something wrong in the code within the section that says "/*** loop through the results/collection of checked items ***/". I've probably made it more complex than it should be, and that's due to the fact that I have no idea what I'm doing (or rather, how I should be doing it), and this has driven me insane for the last 2 days...which prompted me to "throw in the towel" and seek the help of you very helpful and intellegent folks. BTW, I am a newbie at this, so if I could be provided the exact code, that would be most wonderful, and much highly appreciated.
Thanks to you folks, I'm feeling real good (with a great sense of achievement) after having come here and got the great advice to learn PDO and prepared statements.
Just this one nasty little hurdle is stopping me from getting to "end-of-job" on my very first WebApp. BTW, sorry about the long post...this is the best/only way I could clearly explaing my situation.
Cheers guys!
case "update-delete":
if(isset($_POST['highlight-purchased']))
{
// ****** Setup customized query to obtain only items that are checked ******
$sql = "SELECT * FROM shoplist WHERE";
for($i=0; $i < count($_POST['checkboxes']); $i++)
{
$sql=$sql . " idnumber=" . $_POST['checkboxes'][$i] . " or";
}
$sql= rtrim($sql, "or");
$statement = $conn->prepare($sql);
$statement->execute();
// *** fetch results for all checked items (1st query) *** //
$result = $statement->fetchAll();
$statement->closeCursor();
// Setup query that will change the purchased flag to "N", if it's currently set to "Y"
$sqlSetToN = "UPDATE shoplist SET purchased = 'N' WHERE purchased = 'Y'";
// Setup query that will change the purchased flag to "Y", if it's currently set to "N", "", or NULL
$sqlSetToY = "UPDATE shoplist SET purchased = 'Y' WHERE purchased = 'N' OR purchased = '' OR purchased IS NULL";
$statementSetToN = $conn->prepare($sqlSetToN);
$statementSetToY = $conn->prepare($sqlSetToY);
/*** loop through the results/collection of checked items ***/
foreach($result as $row)
{
if ($row["purchased"] != "Y")
{
// *** fetch one row at a time pertaining to the 2nd query *** //
$resultSetToY = $statementSetToY->fetch();
foreach($resultSetToY as $row)
{
$statementSetToY->execute();
}
}
else
{
// *** fetch one row at a time pertaining to the 2nd query *** //
$resultSetToN = $statementSetToN->fetch();
foreach($resultSetToN as $row)
{
$statementSetToN->execute();
}
}
}
break;
}
CRUD Queston.png 20.68KB
0 downloads
If you also have any feedback on my code, please do tell me. I wish to improve my coding base. Basically when you fill out the register form, it will check for data, then execute the insert query. But for some reason, the query will NOT insert into the database. In the following code below, I left out the field ID. Doesn't work with it anyways, and I'm not sure it makes a difference. Code: Code: [Select] mysql_query("INSERT INTO servers (username, password, name, type, description, ip, votes, beta) VALUES ($username, $password, $name, $server_type, $description, $ip, 0, 1)"); Full code: Code: [Select] <?php include_once("includes/config.php"); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title><? $title; ?></title> <meta http-equiv="Content-Language" content="English" /> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <link rel="stylesheet" type="text/css" href="style.css" media="screen" /> </head> <body> <div id="wrap"> <div id="header"> <h1><? $title; ?></h1> <h2><? $description; ?></h2> </div> <? include_once("includes/navigation.php"); ?> <div id="content"> <div id="right"> <h2>Create</h2> <div id="artlicles"> <?php if(!$_SESSION['user']) { $username = mysql_real_escape_string($_POST['username']); $password = mysql_real_escape_string($_POST['password']); $name = mysql_real_escape_string($_POST['name']); $server_type = mysql_real_escape_string($_POST['type']); $description = mysql_real_escape_string($_POST['description']); if(!$username || !$password || !$server_type || !$description || !$name) { echo "Note: Descriptions allow HTML. Any abuse of this will result in an IP and account ban. No warnings!<br/>All forms are required to be filled out.<br><form action='create.php' method='POST'><table><tr><td>Username</td><td><input type='text' name='username'></td></tr><tr><td>Password</td><td><input type='password' name='password'></td></tr>"; echo "<tr><td>Sever Name</td><td><input type='text' name='name' maxlength='35'></td></tr><tr><td>Type of Server</td><td><select name='type'> <option value='Any'>Any</option> <option value='PvP'>PvP</option> <option value='Creative'>Creative</option> <option value='Survival'>Survival</option> <option value='Roleplay'>RolePlay</option> </select></td></tr> <tr><td>Description</td><td><textarea maxlength='1500' rows='18' cols='40' name='description'></textarea></td></tr>"; echo "<tr><td>Submit</td><td><input type='submit'></td></tr></table></form>"; } elseif(strlen($password) < 8) { echo "Password needs to be higher than 8 characters!"; } elseif(strlen($username) > 13) { echo "Username can't be greater than 13 characters!"; } else { $check1 = mysql_query("SELECT username,name FROM servers WHERE username = '$username' OR name = '$name' LIMIT 1"); if(mysql_num_rows($check1) < 0) { echo "Sorry, there is already an account with this username and/or server name!"; } else { $ip = $_SERVER['REMOTE_ADDR']; mysql_query("INSERT INTO servers (username, password, name, type, description, ip, votes, beta) VALUES ($username, $password, $name, $server_type, $description, $ip, 0, 1)"); echo "Server has been succesfully created!"; } } } else { echo "You are currently logged in!"; } ?> </div> </div> <div style="clear: both;"> </div> </div> <div id="footer"> <a href="http://www.templatesold.com/" target="_blank">Website Templates</a> by <a href="http://www.free-css-templates.com/" target="_blank">Free CSS Templates</a> - Site Copyright MCTop </div> </div> </body> </html> I was just wondering if it's possible to run a query on data that has been returned from a previous query? For example, if I do Code: [Select] $sql = 'My query'; $rs = mysql_query($sql, $mysql_conn); Is it then possible to run a second query on this data such as Code: [Select] $sql = 'My query'; $secondrs = mysql_query($sql, $rs, $mysql_conn); Thanks for any help I'm trying to update every record where one field in a row is less than the other. The code gets each row i'm looking for and sets up the query right, I hope I combined the entire query into one string each query seperated by a ; so it's like UPDATE `table` SET field2= '1' WHERE field1= '1';UPDATE `table` SET field2= '1' WHERE field1= '2';UPDATE `table` SET field2= '1' WHERE field1= '3';UPDATE `table` SET field2= '1' WHERE field1= '4';UPDATE `table` SET field2= '1' WHERE field1= '5'; this executes properly if i run the query in phpMyAdmin, however when I run the query in PHP, it does nothing... Any advice? Say I have this query: site.com?var=1 ..I have a form with 'var2' field which submits via get. Is there a way to produce: site.com?var=1&var2=formdata I was hoping there would be a quick way to affix, but can't find any info. Also, the query could sometimes be: site.com?var2=formdata&var=1 I would have to produce: site.com?var2=updatedformdata&var=1 Is my only option to further parse the query? What would be the correct way to close a mysql query? At current the second query below returns results from the 1st query AND the 2nd query The 3rd query returns results from the 1st, 2nd and 3rd query. etc etc. At the moment I get somthing returned along the lines of... QUERY 1 RESULTS Accommodation 1 Accommodation 2 Accommodation 3 QUERY 2 RESULTS Restaurant 1 Restaurant 2 Restaurant 3 Accommodation 1 Accommodation 2 Accommodation 3 QUERY 3 RESULTS Takeaways 1 Takeaways 2 Takeaways 3 Restaurant 1 Restaurant 2 Restaurant 3 Accommodation 1 Accommodation 2 Accommodation 3 Code: [Select] <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <?php include($_SERVER['DOCUMENT_ROOT'].'/include/db.php'); ?> <title>Untitled Document</title> <style type="text/css"> <!-- --> </style> <link href="a.css" rel="stylesheet" type="text/css" /> </head><body> <div id="listhold"> <!------------------------------------------------------------------------------------------------------------------------------------------------------> <div class="list"><a href="Placestostay.html">Places To Stay</a><br /> <?php $title ="TITLE GOES HERE"; $query = mysql_query("SELECT DISTINCT subtype FROM business WHERE type ='Accommodation' AND confirmed ='Yes' ORDER BY name"); echo mysql_error(); while($ntx=mysql_fetch_row($query)) $nt[] = $ntx[0]; $i = -1; foreach($nt as $value) {$i++; $FileName = str_replace(' ','_',$nt[$i]) . ".php"; $FileUsed = str_replace('_',' ',$nt[$i]); echo "<a href='" . str_replace(' ','_',$nt[$i]) . ".php?title=$title&subtype=$FileUsed'>" . $nt[$i] . "</a>" . "<br/>"; $FileHandle = fopen($FileName, 'w') or die("cant open file"); $pageContents = file_get_contents("header.php"); fwrite($FileHandle,"$pageContents");} fclose($FileHandle); ?> </div> <!------------------------------------------------------------------------------------------------------------------------------------------------------> <div class="list"><a href="Eatingout.html">Eating Out</a><br /> <?php $title ="TITLE GOES HERE"; $query = mysql_query("SELECT DISTINCT subtype FROM business WHERE type ='Restaurant' AND confirmed ='Yes' ORDER BY name"); echo mysql_error(); while($ntx=mysql_fetch_row($query)) $nt[] = $ntx[0]; $i = -1; foreach($nt as $value) {$i++; $FileName = str_replace(' ','_',$nt[$i]) . ".php"; $FileUsed = str_replace('_',' ',$nt[$i]); echo "<a href='" . str_replace(' ','_',$nt[$i]) . ".php?title=$title&subtype=$FileUsed'>" . $nt[$i] . "</a>" . "<br/>"; $FileHandle = fopen($FileName, 'w') or die("cant open file"); $pageContents = file_get_contents("header.php"); fwrite($FileHandle,"$pageContents");} fclose($FileHandle); ?> </div> <!------------------------------------------------------------------------------------------------------------------------------------------------------> <div class="list"><a href="Eatingin.html">Eating In</a><br /> <?php $title ="TITLE GOES HERE"; $query = mysql_query("SELECT DISTINCT subtype FROM business WHERE type ='Takeaways' AND confirmed ='Yes' ORDER BY name"); echo mysql_error(); while($ntx=mysql_fetch_row($query)) $nt[] = $ntx[0]; $i = -1; foreach($nt as $value) {$i++; $FileName = str_replace(' ','_',$nt[$i]) . ".php"; $FileUsed = str_replace('_',' ',$nt[$i]); echo "<a href='" . str_replace(' ','_',$nt[$i]) . ".php?title=$title&subtype=$FileUsed'>" . $nt[$i] . "</a>" . "<br/>"; $FileHandle = fopen($FileName, 'w') or die("cant open file"); $pageContents = file_get_contents("header.php"); fwrite($FileHandle,"$pageContents");} fclose($FileHandle); ?> </div> <!------------------------------------------------------------------------------SKILLED TRADES BELOW---------------------------------------------------> <div class="list"><a href="Skilledtrades.html">Skilled Trades</a><br/> <?php $title ="TITLE GOES HERE"; $query = mysql_query("SELECT DISTINCT subtype FROM business WHERE type ='Skilled Trades' AND confirmed ='Yes' ORDER BY name"); echo mysql_error(); while($ntx=mysql_fetch_row($query)) $nt[] = $ntx[0]; $i = -1; foreach($nt as $value) {$i++; $FileName = str_replace(' ','_',$nt[$i]) . ".php"; $FileUsed = str_replace('_',' ',$nt[$i]); echo "<a href='" . str_replace(' ','_',$nt[$i]) . ".php?title=$title&subtype=$FileUsed'>" . $nt[$i] . "</a>" . "<br/>"; $FileHandle = fopen($FileName, 'w') or die("cant open file"); $pageContents = file_get_contents("header.php"); fwrite($FileHandle,"$pageContents");} fclose($FileHandle); ?> </div> here's the code: Code: [Select] $companyName = 'big company'; $address1 = 'big bay #8'; $address2 = 'some big warehouse'; $city = 'big city'; $province = 'AB'; $postalCode = 'T1T0N0'; $phone = '0123456789'; $email2 = 'bigKahuna@bigKahuna.edu'; $query = "INSERT INTO clients ( companyName, address1, address2, city, province, postalCode, phone, email) VALUES ( ". $companyName.",".$address1.",".$address2.",".$city.",".$postalCode.",".$phone.",".$email2.")"; $result = mysql_query($query, $connexion); if ($result) { // Success! echo "Fabulous! check the DB, we did it! :D<br>"; ?> <pre> <?php print_r($result); ?> </pre> <?php } else { // Fail! echo"CRAAAAAPP! something went wrong. FIX IT! :P<br>"; echo mysql_error(); } if (isset($connexion)) { mysql_close($connexion); } i copied it over from an old *working* file to illustrate how a simple INSERT works. this is the error i get: Code: [Select] You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'company,big bay #8,some big warehouse,big city,T1T0N0,0123456789,bigKahuna@bigKa' at line 4 looks completely valid to me. all the database table elements are set to VARCHAR(80), so it can't be a space/type issue... halp! WR! I'm restarting this under a new subject b/c I learned some things after I initially posted and the subject heading is no longer accurate. What would cause this behavior - when I populate session vars from a MYSQL query, they stick, if I populate them from an MSSQL query, they drop. It doesn't matter if I get to the next page using a header redirect or a form submit. I have two session vars I'm loading from a MYSQL query and they remain, the two loaded from MSSQL disappear. I have confirmed that all four session vars are loading ok initially and I can echo them out to the page, but when the application moves to next page via redirect or form submit, the two vars loaded from MSSQL are empty. Any ideas? I am trying to create a query which reads and uses a previous query which could go on for upto four queries. For example: Query: $carcolour(red), Query: $carmodel(ford), Query: $enginesize(1600), Query: $carlocation(New York) This displays all red cars, which are Ford, which 1600CC, which are located in New York. or Query: $enginesize(1600), Query: $carcolour(red), Query: $carmodel(ford), Query: $carlocation(New York) This displays all 1600CC cars, which red car, which are Ford, which are located in New York. (Same result as above) I have found this guide but Im not sure it what I am looking for. I have also come across the Join function. However this seems to be based on joining two seperate queries. http://www.suite101.com/content/how-tor-run-multiple-mysql-queries-with-php-a105672 Can anyone advise on the best way to create a set of queries which reads and uses the results of the previous query? Good Day Guys
I have a bit of a urgent problem.
Here is my Query:
$query = "SELECT distinct Img.propertyId as PropertyId, Title, ImageUrl, Location, Bedrooms, Bathrooms, Parking, Price FROM PROPERTIES as Prop LEFT JOIN IMAGES as Img ON Img.PropertyId = Prop.PropertyId WHERE 1=1 AND Price >=1000 AND Price <=5000 "; |
|||||||