|
PHP - Custom: "select * From * Where ..." Statement
Ok, I am not sure if I can explain it correctly, but here it goes. I have a form where user is asked to enter up to three name. Let's say that the fields are called [name1], [name2] and [name3] and they are called the came in the table. Now I have a code which allows me to compare what names are in the database versus the name that was entered by the user.
$query = "SELECT * FROM Project_Registrations WHERE name1= '$_POST[name1]' "; $result2 = mysql_query($query); if (mysql_numrows($result2) > 0) { while($row = mysql_fetch_array($result2)) {echo" ...error code... ";} } else { ...ok code... }; This works well for one name field but I have three in the form and three in the table. How do I define it so all three name fields in the form are compared to all three in the table and if just on matches I can give them the ...error code...? Oh, and they can enter up to three names in the form, but it could be two or one. Can I code it such: $query = "SELECT * FROM Project_Registrations WHERE name1= '$_POST[name1]' OR name1= '$_POST[name2] OR name1= '$_POST[name2]' OR ...'"; Thanks Similar TutorialsWhy is this not working? I can not seem to incorporate and into the statement $query = "SELECT * FROM Project_Registrations WHERE (First_Name = '$_POST[name_1]' AND Teacher = '$_POST[teacher]' AND School = '$_POST[school]') OR (Second_Name = '$_POST[name_1]' AND Teacher = '$_POST[teacher]' AND School = '$_POST[school]') OR (First_Name = '$_POST[name_2]' AND Teacher = '$_POST[teacher]' AND School = '$_POST[school]') OR (Second_Name = '$_POST[name_2]' AND Teacher = '$_POST[teacher]' AND School = '$_POST[school]') "; Thanks Can someone please help me with an array problem i can not figure out. I need the array to be numbered from 1 to how ever many fields that are needed in the form and have a mysql field name and the title of the field also in the array. 1, "mysql_field_name", "Title of form field" 2, "", "" and so on then the form will be shown based on the array. I have the following draft code which I am working with. any suggestions on how i may do this array ? Code: [Select] <?php $options = array( '1'=> array('fieldtext'=>'option1', 'mysqlfield'=>'option1'), '2'=> array('fieldtext'=>'option2', 'mysqlfield'=>'option2'), '3'=> array('fieldtext'=>'option3', 'mysqlfield'=>'option3'), '4'=> array('fieldtext'=>'option4', 'mysqlfield'=>'option4'), ); // $options = array(1 => "option1", "option2", "option3", "option4"); // the line above works but i want to include the name of the mysql field as well. $userid = 1; ?> <div style="align: center; margin: 12px; font-family:Tahoma;"> <br><br><?php if ($_POST['Update'] != "Update") { // check if form submitted yet, if not get data from mysql. $res = db_query("SELECT * FROM `users` WHERE `userid` = '" . $userid . "'"); foreach($options as $key => $value) { $_POST[$key] = mysql_result($res, 0, $value); } $ok_to_update = "no"; } elseif ($_POST['Update'] == "Update") { // check if form submitted yet, if so get POST data. // error checking // foreach($options as $key => $value) { // $_POST[$i] = ""; // } $ok_to_update = "yes"; } if ($_POST['Update'] == "Update" && $ok_to_update == "yes") { // $res = db_query("INSERT INTO `users` () VALUES ()"); // add user details to database. ?><p><br><br><br>Thank you for updating</p><?php } else { ?><form name="form1" method="post" action=""> <?php foreach($options as $key => $value) { ?><p><?php echo($value); ?>: <input type="text" name="<?php echo($key); ?>" value="<?php echo($_POST[$key]);?>"></p> <?php } ?> <input name="Update" type="submit" value="Update"> </form> <?php } ?> </div> Hi, bit stuck on how to find and replace "<" and ">" with "<" and ">". I basically have a database record that outputs to screen and I need the code in the <code> tags to be rendered to the screen. I therefore need it to go through the whole array variable from the db and change the symbols just inside the code tags. Please be aware that the code tags might happen more than once here's an example below Code: [Select] <p>blah blah blah</p> <p>blah blah blah</p> <p>blah blah blah</p> <code> <h1>hello</h1> </code> <p>blah blah blah</p> <p>blah blah blah</p> <p>blah blah blah</p> <code> <h1>hello</h1> </code> the desired output would be: <p>blah blah blah</p> <p>blah blah blah</p> <p>blah blah blah</p> <code> <h1>hello</h1 </code> <p>blah blah blah</p> <p>blah blah blah</p> <p>blah blah blah</p> <code> <h1>hello</h1 </code> help on this would be great Cheers Rob Hi guys I am a newbie with PHP and I have been trying to solve this problem for 3 days.. Ive set up a booking form on my website to be sent directly to my email once the client clicked on the send button.. The problem I am having while checking these pages on wamp is that the booking form is ok but when I click on the send button the following message error appears "Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() in C:\wamp\www\fluffy_paws\booking_form2.php on line 27" When I check online I have this message "500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed." Are my codes wrong??? My webhosting is Blacknight.com , Im on Windows Vista, my internet is a dongle with O2 ireland Thanks for your help! Hi guys I'm struggling a bit, I need to replace a word that occurs multiple times in text with an array("up","down","forward","backwards") of words. $find = "left"; $replace = array("up","down","forward","backwards"); $text = "left left left left"; echo str_replace($find,$replace,$text); The Output is: array array array array Did try this with a foreach statement as well, but no luck. Is there a better way of doing this? Thanks cant work out this mysql syntax error "operation":"medupdate","medid":"","name":"ibo","medyear":"5","medmonth":"21","medday":"1","recuser":1,"SuccFail":"fail","SuccFailMessage":"error occured You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '''WHERE med_id=' at line 2","ResultData":""} Code: [Select] $sql="update metodology set med_description='".$req['name']."', med_year='".$req['medyear']."', med_month='".$req['medmonth']."', med_day='".$req['medday']."', med_recorddate= now(), med_recorduserid= 1'"; $sql.= " WHERE med_id=".$req['medid']; Hello, all... I seem to remember, like if I have a problem with a mysql_query() statement, and want find out why it keeps giving me an error, I'm often told to echo out the statement for debugging purposes. Can somebody remind me again how that's done... thanks! I have a "best practices" question. Visitors are limited to a maximum of 5 shipping labels per day, so mySQL counts how many were created in the past 24 hours and logs them. Which "style" is better? ### Style #1 ##################### $labelCounter = $db->prepare("SELECT count(*).. // mySQL counts labels if($numberoflabels < 5) {
// RUN BIG CURL SCRIPT IF LESS THAN 5 LABELS $log = $db->prepare("INSERT into label_counter... // log the good label } else { // don't run big curl script echo "Sorry visitor, no label could be created"; } ### Style #2 ##################### $too-many-labels = FALSE; $labelCounter = $db->prepare("SELECT count(*) // mySQL counts labels
if($numberoflabels > 4) { if ($too-many-labels == FALSE) {
// RUN BIG CURL SCRIPT IF LESS THAN 5 LABELS } else { // don't run big curl script echo "Sorry visitor, no label could be created"; } Style # 1 seems more direct, but Style 2 somehow "looks safer." Which is really better? What are your thoughts, please? I am currently creating a form and I want to populate a drop down selection menu with data from two fields in a form. For example, I want it to pull the first and last name fields from a database to populate names in a drop down menu in a form. I want the form to submit to the email address of the person selected in the drop down. Is this possible to do? The email is already a field in the record of the person in the database. Can anyone give me some pointers or advice on how I should go about setting up the "Select" box drop down? I am not sure how to code it to do what I am wanting. Any links to relevant help would be appreciated too. Thanks in advance! Warning: mysql_fetch_array(): supplied argument is not a valid MySQL result resource in /home/aci/docs/admin/hours.php on line 20 Code: [Select] <?php $user = $_SESSION['myusername']; $result = mysql_query("SELECT * hours WHERE member='$user'"); while ($row = mysql_fetch_array($result)){ echo $row['date'] . " " . $row['time'] . "<br />"; } ?> Code: [Select] CREATE TABLE `hours` ( `hoursID` int(5) NOT NULL auto_increment, `member` varchar(20) NOT NULL default '', `date` date NOT NULL default '0000-00-00', `time` time NOT NULL default '00:00:00', PRIMARY KEY (`hoursID`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=7 ; -- -- Dumping data for table `hours` -- INSERT INTO `hours` VALUES (4, 'aci', '2010-11-30', '14:31:39'); INSERT INTO `hours` VALUES (2, 'aci', '2010-11-30', '14:31:08'); INSERT INTO `hours` VALUES (3, 'aci', '2010-11-30', '14:31:23'); INSERT INTO `hours` VALUES (5, 'aci', '2010-11-30', '14:31:40'); I am trying to print the list of a table which I requested with "SELECT DISTINCT" as below Code: [Select] $db_connect = mysqli_connect(DB_HOST, DB_USER, DB_PASSWORD, DB_NAME); $sql_get = "SELECT DISTINCT category FROM con"; $sql_run = mysqli_query($db_connect, $sql_get) or mysqli_error($db_connect); $sql_assoc = mysqli_fetch_assoc($sql_run); What is now needed to print the list of the table data by this conditions? I tried the while loop, but I seem to approach wrong, and get endless loops or errors. Hi, I need to call to this text to add a all with value "blank/empty" or "0" to the dropdownlist code below.. it should be inserted int the first position in the dropdownlist and have a value blank and call to this text from the language files: $searchAll = gettext('_LANGUAGE_SEARCH_ALL',_LANGUAGE_SEARCH_ALL,false,false); example is: ratestitle=>0 gettext('_LANGUAGE_SEARCH_ALL',_LANGUAGE_SEARCH_ALL,false,false); the words it calls is "ALL" when the user selects or leaves the "ALL" in the list the value remains empty this allows the search to search everything.. basically im stuck how to get it in the dropdown list as the first default position: can anyone help? here is my code://this is a search function which calls to the field rate_title the text from the select box is matched to the database table and the search pages shows the search option is the search is successful.. I have 5 of these types of searches but cant give a broader search option to my users as the values must be selected to search--- i need the option "ALL" to have a "EMPTY" value or no value.... if (in_array("ratestitle",$searchOptions)&& $showSearchOptions ) { if (empty($sch->filter['ratestitle']) ) $selectOption=$output['LANGUAGE_SEARCH_RATESTITLE']; else $selectOption=$sch->filter['ratestitle']; $showButton=true; $query = "SELECT DISTINCT rate_title FROM #__rates_table ORDER BY rate_title ASC"; $dropDownList ="<select class=\"inputbox\" name=\"ratestitle\">"; $ratesitles =doSelectSql($query); foreach ($ratesitles as $ratetitle) { $selected=""; $rate_title=$ratetitle->rate_title; if ($ratetitle==".$sch->filter['ratestitle'].") $selected="selected"; $dropDownList .= "<option ".$selected." value=\"".$rate_title."\">".$rate_title."</option>"; } $dropDownList.="</select>"; $output['RATESTITLE']=$dropDownList; } As the title says, I'm looking for a better way to create a switch statement on an "edit" form. Since there are 3 of the same types of <selects>, all using the values of US states. Billing state, shipping state, drivers license state. Currently I am using this: switch($row['pri_add4']){ case 'AK': $pri_add4 = '<option value="AK" selected="selected">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'AL': $pri_add4 = '<option value="AK">AK</option><option value="AL" selected="selected">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'AR': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR" selected="selected">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'AZ': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ" selected="selected">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'CA': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA" selected="selected">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'CO': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO" selected="selected">CO</option><option value="CT">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'CT': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT" selected="selected">CT</option><option value="DC">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; case 'DC': $pri_add4 = '<option value="AK">AK</option><option value="AL">AL</option><option value="AR">AR</option><option value="AZ">AZ</option><option value="CA">CA</option><option value="CO">CO</option><option value="CT">CT</option><option value="DC" selected="selected">DC</option><option value="DE">DE</option><option value="FL">FL</option><option value="GA">GA</option><option value="HI">HI</option><option value="IA">IA</option><option value="ID">ID</option><option value="IL">IL</option><option value="IN">IN</option><option value="KS">KS</option><option value="KY">KY</option><option value="LA">LA</option><option value="MA">MA</option><option value="MD">MD</option><option value="ME">ME</option><option value="MI">MI</option><option value="MN">MN</option><option value="MO">MO</option><option value="MS">MS</option><option value="MT">MT</option><option value="NC">NC</option><option value="ND">ND</option><option value="NE">NE</option><option value="NH">NH</option><option value="NJ">NJ</option><option value="NM">NM</option><option value="NV">NV</option><option value="NY">NY</option><option value="OH">OH</option><option value="OK">OK</option><option value="OR">OR</option><option value="PA">PA</option><option value="RI">RI</option><option value="SC">SC</option><option value="SD">SD</option><option value="TN">TN</option><option value="TX">TX</option><option value="UT">UT</option><option value="VA">VA</option><option value="VT">VT</option><option value="WA">WA</option><option value="WI">WI</option><option value="WV">WV</option><option value="WY">WY</option>'; break; } NOTE: I had to remove a lot of the state options so the post wouldn't exceed the 40000 characters limit. Hi and thanks for taking the time to read through this first and foremost. I have a bit of code that I have managed to piece together with help from other sites and what it does is connect to our local ms sql server and retrieve a few tables from our database. The info is relating to property management and it basically displays the unit address, current date and its rental status. (Occupied or Vacant) This makes it easy for us to at a glance check the status of our rentals instead of having to log into our software and navigate through all that.. anyways, I have two issues I need help with. First problem, in my code, is it possible to write a conditional statement that would check for a certain status in a view and then if it is there, print a simple yes or no in a table with that appropriate property. For example, we have property 1000 name street and it is currently vacant, however the viewPendingLease shows us information regarding future bookings. I would like to be able to look through that view with the code, check property 1000 name street for any future pending leases, and if there is one, print out a "Yes" in a Future Booked column that I would create. If any of that makes sense, I can post the print out of the tables of the viewPendingLease if it makes it easier for anyone to see the data output to understand what I am meaning. The second issue, is it possible to change the color of the text according to a variable, say a word in a generated table with html or css? I would like to color the words vacant or occupied green and red respectively just to make it much easier to zero in on the vacant properties. Or even maybe just color every other row a background color just to help distinguish between the different properties. Here is my code that pulls up my current tables to show Property, Street and current rented status. Code: [Select] <?php //connect to a DSN "*******" $conn = odbc_connect('*******','*****','************'); if ($conn) { //the SQL statement that will query the database $query = "Select unit.PropertyUnitID, unit.Street, unit.Status, from unit"; //perform the query $result=odbc_exec($conn, $query); echo "<table border=\"1\"><tr>"; //print field name $colName = odbc_num_fields($result); for ($j=1; $j<= $colName; $j++) { echo "<th>"; echo odbc_field_name ($result, $j ); echo "</th>"; } //fetch tha data from the database while(odbc_fetch_row($result)) { echo "<tr>"; for($i=1;$i<=odbc_num_fields($result);$i++) { echo "<td>"; echo odbc_result($result,$i); echo "</td>"; } echo "</tr>"; } echo "</td> </tr>"; echo "</table >"; //close the connection odbc_close ($conn); } else echo "odbc not connected"; ?> I currently have the viewPendingLease.Active (which shows if there is a future pending lease) taken out due to a repeating data issue I am also trying to figure out... (Please ignore HTML formatting) Code: [Select] if (is_null($RESULT['PBS_ACCOUNT_ID'])) { echo "<font size=2 color=#000000 face=arial> <</font>"; echo "<font size=2 color=#000000 face=arial>PBS_ACCOUNT_ID</font>"; echo "<font size=2 color=#000000 face=arial>></font>"; echo "<font size=2 color=#000000 face=arial>HELLO</font>"; echo "<font size=2 color=#000000 face=arial><</font>"; echo "<font size=2 color=#000000 face=arial>/PBS_ACCOUNT_ID</font>"; echo "<font size=2 color=#000000 face=arial>></font>"; } else { echo "<font size=2 color=#000000 face=arial> <</font>"; echo "<font size=2 color=#000000 face=arial>PBS_ACCOUNT_ID</font>"; echo "<font size=2 color=#000000 face=arial>></font>"; echo "<B>"; echo $RESULT['PBS_ACCOUNT_ID']; echo "</B>"; echo "<font size=2 color=#000000 face=arial><</font>"; echo "<font size=2 color=#000000 face=arial>/PBS_ACCOUNT_ID</font>"; echo "<font size=2 color=#000000 face=arial>></font>"; echo "<BR>"; } If the PBS_ACCOUNT_ID field is empty, it just shows blank. Why doesn't it echo "HELLO?" Or should I be using "IS_EMPTY?" I am getting the following error when using composer: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? Just started. I am pretty sure composer.json wasn't changed. journalctl doesn't show anything. Maybe Doctrine related, however, nothing seems to help.
Any ideas? [michael@devserver www]$ php -v PHP 7.3.4 (cli) (built: Apr 2 2019 13:48:50) ( NTS ) Copyright (c) 1997-2018 The PHP Group Zend Engine v3.3.4, Copyright (c) 1998-2018 Zend Technologies with DBG v9.1.9, (C) 2000,2018, by Dmitri Dmitrienko [michael@devserver www]$ composer -V Composer version 1.4.2 2017-05-17 08:17:52 [michael@devserver www]$ yum info composer Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.us.oneandone.net * epel: mirror.rnet.missouri.edu * extras: mirror.us.oneandone.net * remi-php73: mirror.bebout.net * remi-safe: mirror.bebout.net * updates: mirror.us.oneandone.net Installed Packages Name : composer Arch : noarch Version : 1.8.4 Release : 1.el7 Size : 1.8 M Repo : installed From repo : epel Summary : Dependency Manager for PHP URL : https://getcomposer.org/ License : MIT Description : Composer helps you declare, manage and install dependencies of PHP projects, : ensuring you have the right stack everywhere. : : Documentation: https://getcomposer.org/doc/ [michael@devserver www]$ composer update Loading composer repositories with package information Updating dependencies (including require-dev) [ErrorException] "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? update [--prefer-source] [--prefer-dist] [--dry-run] [--dev] [--no-dev] [--lock] [--no-custom-installers] [--no-autoloader] [--no-scripts] [--no-progress] [--no-suggest] [--with-dependencies] [-v|vv|vvv|--verbose] [-o|--optimize-autoloader] [-a|--classmap-authoritative] [--apcu-autoloader] [--ignore-platform-reqs] [--prefer-stable] [--prefer-lowest] [-i|--interactive] [--root-reqs] [--] [<packages>]... [michael@devserver www]$
I am attempting to use use two tables from the same database as described below. My db connection is made and is good. As part of a larger application I am creating a comments feature. Each row is a separate comment that was left by a user. I've no problem getting each row from the database and printing each out as I want formatted. The second table I am using contains all of the personal info of each member including their username, their displayed name, location and among other things the URL to an image they want associated with their account. Each row in the comments table contains the following id # of the comment, username of the person that left it, the date and of course the body of the message itself. Now I am trying to get the comment to show the image found at the URL in the second table (personal info). So for each row in the comments table I want it to pull the commentor's img_url from the second table. $result = mysql_query("SELECT * FROM page_comments WHERE page_id = '$id'"); if(mysql_num_rows($result)==0) { echo "There are currently no comments."; }else{ while($row = mysql_fetch_array($result)) { echo "<table>"; echo "<tr>"; echo "<td>"; echo "<img sro=\"$img_url\" width=50 height=50>"; echo "</td>"; echo "<td>"; echo "<a href=profile.php?member="; echo $row['commentor']; echo ">"; echo $row['commentor']; echo "</a>"; echo "</td>"; echo "<td>"; echo $row['date']; echo "</td>"; echo "</tr>"; echo "<tr>"; echo "<td cospan=3>"; echo $row['comment']; echo "</td>"; echo "</tr>"; echo "</table>"; echo "<br />"; } } As you can see I've thrown the "$img_url" in there as a placeholder for the time being. I've tried a couple of ideas and while none of them threw any errors it, of course, didn't return a value so the img was broken and the HTML source was just empty. Any and all ideas are greatly appreciated. I want to post some form identifyer when I hit submit, so that I can use this in an SQL query. Previously I used the below code and would retrieve either page1.php or page2.php etc from $_POST['subject']); Code: [Select] <td> <select name="subject" id="subject" onchange="gotourl(this.value)"> <option value="" >Please Select</option> <option value="page1.php" >page1</option> <option value="page2.php">page2</option> <option value="page3.php">page3</option> </select> </td> will this work? Code: [Select] <form id="form1" name="form1" value="tableName" method="post" action=""> $_POST['form1']) returns tableName...... Thanks Hi there, Does anyone know how to select from a mutlidimensional array, and put the results in a new array? I figured it out but it takes a long time. My array is huge (over 1000+ items) and this search is performed about 50 times before loading the page. My array is called $tasks and it looks like this Code: [Select] $tasks=Array( [0]=>array([id]=>"12"; [owner]=>"nancy"; [task]=>"clean the house"); [1]=>array([id]=>"23"; [owner]=>"toby"; [task]=>"do homework"); [2]=>array([id]=>"43"; [owner]=>"dan"; [task]=>"take out trash"); [3]=>array([id]=>"32"; [owner]=>"nancy"; [task]=>"cook dinner"); ) I want to be able to select from $tasks where owner="nancy", so i end up with this Code: [Select] $nancy_tasks=array( [0]=>array([id]=>"12"; [owner]=>"nancy"; [task]=>"clean the house"); [1]=>array([id]=>"32"; [owner]=>"nancy"; [task]=>"cook dinner");) )Thank you!!! This topic has been moved to Linux. http://www.phpfreaks.com/forums/index.php?topic=318175.0 |
|||||||