PHP - Email From Hotmail / Gmail And Send Invitation To Join
I am looking for a script that is used in Facebook. Wherein, user enters the email address and password and the system will automatically fetch the addresses from the address book of Hotmail or Gmail etc and sends invitation to join the site network. Do you have any link for such a script that comes free.
Looking forward to that. Thanks, Faisal Similar TutorialsAlright so I have 3 pages. Signup, Password reset and Send message. All three pages/forms email to the recipient.
So far my test have only been with hotmail and gmail.
All emails go through for hotmail accounts. They show up in the hotmail.
All emails DO go through for gmail accounts. But they don't show up in the gmail. The only page that gmail is able to receive emails from is "send message". The emails derived from that send message show up in gmail. The other two don't.
There are not errors on the server side that show up. It clearly shows emails being sent.
Does anyone have a clue why this is happening?
Edited by man5, 23 August 2014 - 03:48 PM. i think because of my code used to send the mail, on my site, its appearing in the spam folder of most of my clients PLUS myself is their a way to eradicate this? correct headers? etc? I am working on a phpmailer script that sends an order confirmation email to the customer AND the client at the same time. If I have the customer email and client email set both to the originating domain's email addresses (myname@myserver.com), then it sends fine. However, if I try to send to an outside mail server (eg. someone@gmail.com), I get the following errors: Code: [Select] SMTP -> FROM SERVER:220 myserver.com ESMTP Exim 4.63 Sat, 18 Sep 2010 15:08:21 -0700 SMTP -> FROM SERVER: 250 myserver.com Hello localhost [127.0.0.1] 250-SIZE 52428800 250-PIPELINING 250-AUTH LOGIN PLAIN 250-STARTTLS 250 HELP SMTP -> FROM SERVER:250 OK SMTP -> FROM SERVER:250 Accepted SMTP -> FROM SERVER: SMTP -> ERROR: RCPT not accepted from server: SMTP Error: The following recipients failed: someone@gmail.com Message could not be sent. Mailer Error: SMTP Error: The following recipients failed: someone@gmail.com SMTP server error: I'm not sure what's going on here. Any SMTP or phpmailer geniuses here that can shed some light on what needs to happen here for this to send to any address? Here is one of my emails. Delivered-To: jason@gmail.com Received: by 10.204.57.134 with SMTP id c6cs22321bkh; Tue, 13 Sep 2011 07:23:32 -0700 (PDT) Received: by 10.101.168.12 with SMTP id v12mr3751263ano.48.1315923810914; Tue, 13 Sep 2011 07:23:30 -0700 (PDT) Return-Path: <contact@big.com> Received: from big.com (big.com [173.0.59.100]) by mx.google.com with ESMTP id c19si889696anj.173.2011.09.13.07.23.29; Tue, 13 Sep 2011 07:23:29 -0700 (PDT) Received-SPF: pass (google.com: domain of contact@big.com designates 173.0.59.100 as permitted sender) client-ip=173.0.59.100; Authentication-Results: mx.google.com; spf=pass (google.com: domain of contact@big.com designates 173.0.59.100 as permitted sender) smtp.mail=contact@big.com; dkim=neutral (body hash did not verify) header.i=@big.com Received: by big.com (Postfix, from userid 33) id 1BDCE2F4041A; Tue, 13 Sep 2011 10:23:20 -0400 (EDT) DKIM-Signatu v=1; a=rsa-sha256; c=simple/simple; d=big.com; s=mail; t=1315923800; bh=ysNGlrscqmqCPbqxJlWWHLaW3SU6MgDVQCze+cevPS4=; h=To:Subject:Message-ID:Date:MIME-Version:Sender:From:Reply-To: Content-Type; b=PDPCRvKGQRP3LeeDNhZQwbX6aMXOZEyqRXV1E+kuDDq05NYRIrmJCcQRhwEIaSosh yoZ0pF5wtrXjgY1KA0hgee7qzSVDhweguBfOydn1qE6nsL1pq CQgsHmtvu9dwPGw9z uUEHM9bg5DwiG0RT5KLYf4oZTJmJpc8n2oyK26/I= To: jason@gmail.com Subject: Closed Beta Invitation from Jason Gordon Message-ID: <87847890-050333@big.com> Date: Tue, 13 Sep 2011 10:38:17 -0400 MIME-Version: 1.0 X-Mailer: PHP-5.3.8 X-Sender: "big" <contact@big.com> X-Priority: 3 Organization: big Errors-To: contact@big.com Sender: contact@big.com From: "big" <contact@big.com> Reply-To: "big" <contact@big.com> Content-Type: multipart/alternative; boundary=87847890 --48673093 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <a href="http://big.com/u/jasonGordon?utm_source=beta_invite&utm_medium=email&utm_content=referer_name&utm_campaign=join_beta" alt="Jason Gordon's profile" title="Jason Gordon's profile">Jason Gordon</a> invited you to join the newest community of entreprenuers and investors, big. Why participate in our closed beta? Here you will be able to find, research and connect with entrepreneurs or investor so much easier than ever before. You will be one of the first people to ever lay eyes on our exclusive software! Sign up by clicking <a href="http://big.com/join?9b782e=&key=7RG5poe9lgxmUSIcQTPji8EtFMnXyOYW3Cf&utm_source=beta_invite&utm_medium=email&utm_content=sign_up&utm_campaign=join_beta" title="big Beta Referral">here</a> If the link does not work, go to <a href="http://big.com" title="big">big.com</a>, click "Join big" and enter your closed beta access key. Your closed beta access key is: 7RG5poe9lgxmUSIcQTPji8EtFMnXyOYW3Cf Please leave us feedback so that we can improve our software. big Team --48673093 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>Closed Beta Invitation</title> </head> <body> <table width="500px" cellspacing="0" cellpadding="13" style="border: 1px solid #e7e7e7;"> <tr> <td> <table cellspacing="0" cellpadding="5" bgcolor="#ffffff" width="480px" style="border: 1px solid #999999;"> <tr> <td bgcolor="#489fcc" cellspacing="15" style="border-bottom: 1px solid #999999; border-top: 0; border-left: 0; border-right: 0; font-family: verdana; letter-spacing: 1px; font-weight: bold; color: white;" width="480px"> big </td> </tr> <tr> <td> <table style="line-height: 26px; font-family: arial; font-size: 13px;" width="100%" cellspacing="10" cellpadding="0"> <tr> <td width="100%"> <table style="line-height: 26px; text-align: justify;" width="100%" cellpadding="0" cellspacing="0"> <tr> <td width="100%"> <a href="http://big.com/u/jasonGordon?utm_source=beta_invite&utm_medium=email&utm_content=referer_name&utm_campaign=join_beta" alt="Jason Gordon's profile" title="Jason Gordon's profile">Jason Gordon</a> invited you to join the newest community of entreprenuers and investors, big. Why participate in our closed beta? Here you will be able to find, research and connect with entrepreneurs or investor so much easier than ever before. You will be one of the first people to ever lay eyes on our exclusive software! </td> </tr> </table> </td> </tr> <tr> <td align="center" width="100%"> <table style="border-top: 1px solid #b8b8b8; border-bottom: 1px solid #b8b8b8;" width="100%" cellpadding="0" cellspacing="5"> <tr> <td width="100%" align="center"> Sign up by clicking <a href="http://big.com/join?9b782e=&key=7RG5poe9lgxmUSIcQTPji8EtFMnXyOYW3Cf&utm_source=beta_invite&utm_medium=email&utm_content=sign_up&utm_campaign=join_beta" title="big Beta Referral">here</a> </td> </tr> </table> </td> </tr> <tr> <td width="100%" style="text-align: justify;"> If the link does not work, go to <a href="http://big.com" title="big">big.com</a>, click "Join big" and enter your closed beta access key. Your closed beta access key is: </td> </tr> <tr> <td align="center" width="100%"> <table bgcolor="#e6e6e6" style="border: 1px solid #b8b8b8;" width="100%" cellpadding="0" cellspacing="5"> <tr> <td width="100%" align="center"> 7RG5poe9lgxmUSIcQTPji8EtFMnXyOYW3Cf </td> </tr> </table> </td> </tr> <tr> <td width="100%"> Please leave us feedback so that we can improve our software. </td> </tr><tr> <td width="100%"> big Team </td> </tr> </table> </td> </tr> </table> </td> </tr> </table> </body> </html> --48673093-- My headers function is... Code: [Select] function mail_header ($type, $random_hash) { $type = (int)$type; if ($type === 0) { $boundary = $random_hash; $x_mailer = phpversion(); $time_stamp = date("r"); $headers = 'Message-ID: <'.$boundary.'-050333@big.com>' . "\r\n"; $headers .= 'Date: ' . $time_stamp . "\r\n"; $headers .= 'MIME-Version: 1.0' . "\r\n"; $headers .= 'X-Mailer: PHP-' . $x_mailer . "\r\n"; $headers .= 'X-Sender: "big" <contact@big.com>' . "\r\n"; $headers .= 'X-Priority: 3' . "\r\n"; $headers .= 'Organization: big' . "\r\n"; $headers .= 'Errors-To: contact@big.com' . "\r\n"; $headers .= 'Sender: contact@big.com' . "\r\n"; $headers .= 'From: "big" <contact@big.com>' . "\r\n"; $headers .= 'Reply-To: "big" <contact@big.com>' . "\r\n"; $headers .= 'Return-Path: "big" <contact@big.com>' . "\r\n"; $headers .= 'Content-Type: multipart/alternative; boundary=' . $boundary . "\r\n"; } return $headers; } Has anyone ever used these. I want to develop a tool so users of my site can invite there friends. i am using mail functions in php and i am sending mails but the mails are going to spam in gmail and for yahoo its going to inbox. my problem is i want to send the email to inbox only as most of them use gmail ....should i use any smtp or any other mail library functions? can anyone guide me? HI, i have a problem, a big one. I used a php script to send some info from my html forms to my gmail. So it functions easy, somebody fills out the form and he click send, after that, his information is sent to me on my gmail, and i can work with it later. Now stupid google have some new filters (from year 2014 ) and it treats some of those mails as spam. Code is written in the way that allows me to get those mails as it is sent from the user himself, from his email. Can anybody correct my script so it won't be treated as a spam, because i know it is possible but don't know how... here is the code - https://gist.github....67145d500c5cf47 // Receiving variables i have some code which sends a confrim link via the posted email. In hotmail it works fine, once the link is clicked they are confirmed but gmail adds %09 to the link making it break. example WHERE hash = their email hashed posted email = test@test.com confirm link(hotmail) confirm.php?email=HASH&o=test@test.com(works) confirm link(gmail)confirm.php?email=%09HASH&o=test@test.com(Doesnt work) anyone know why gmail does this? Hello all, I used simple php email function but it send an email in junk folder or spam. Can anyone tell me why is this so? Her is the code: $host = "ssl://smtp.gmail.com"; $port = "465"; $to = " xx@gmail.com"; // note the comma $subject = " $_POST[company_website] "; $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; $headers .= 'From: About Wholesale Account' . "<$_POST[email]>\r\n"; $headers .= 'Cc: mail@gmail.com' . "\r\n"; $headers .= 'Bcc: cc@gmail.com' . "\r\n"; mail($to, $subject, $message, $headers); Hello Guys,
I need your help as many PHPers here is more experienced in PHP coding than me. I have specific project I am working on and need a piece of code that can send an email from HTML form using PHP to the email address that is entered manually on the form, instead of standard sent to PHP code that is fixed within PHP script and executed during submission. I want sth that can grab manually enetered recipient's e-mail address, paste it to the PHP code and then use it to send the email to the recipient, instead of fixed sent to code. Something would say dynamically changed during the entry that can inject into PHP code the new address email entered on the form and then submit to it. Any ideas will be great.
Thanks.
Edited March 27, 2019 by slawotrend Hey! I'm really stuck on my for fun project... What it's supposed to do is quite obvious, grab an invitation code, check if it's created in the database: If it is it'll let you continue, if not it'll redirect you somewhere else, and it works great but I have two problems. The first problem I have is how to stay on the page if it reloads (like if I get the error "you need to fill out all forms" it'll reload) but when it reloads, the saved invitation code that I grabbed previously will be gone and it'll redirect to someplace, which... I don't want to happen! I tried using sessions to save your code but a user can just open the page several times and it'll create multiple sessions and he can therefore register multiple accounts when only one is meant to be registered or something, I'm kind of confused on this stage. Secondly I want to save the code used to register with in a table but this wont work, IDK why but it just won't. <?php include("connect.php"); $invite = $_GET['code']; $validate_invite = mysql_query("SELECT XX FROM XX WHERE invite = '$invite'"); $rows = mysql_num_rows($validate_invite); if($rows>0) { } else { header('Location: /someplace'); } ?> <?php include("include/header.php"); ?> <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post" name="register"> <input type="text" name="email"> username <input type="text" name="username"> password <input type="text" name="password"> <input type="submit" name="submit" value="register"> </form> <?php if (isset($_POST['submit']) ) { $email = mysql_real_escape_string($_POST['email']); $username = mysql_real_escape_string($_POST['username']); $password = $_POST['password']; if (!$email || !$username || !$password) { echo 'you need to fill out all forms'; exit (); } $register_query = 'insert into XX (username, password, email, invite) values("'.$username.'", "'.md5($password).'", "'.$email.'", "'.$invite.'"'; mysql_query($register_query); } ?> If someone would care to help me out I would be very happy, I know I explained it kind of complicated and confusing but you get the point, hopefully. I love you phpfreaks:)
The code below currently sends a separate Email with data from each row of a table when a Save All button is pressed. So, if I have 4 rows of data, 4 Email will be sent. $email="to@email.com"; $from="from@email.com"; $msg=""; $subject="Registers Info for: ".$values["first_name"]." ".$values["last_name"].""; $msg.= "Student: ".$values["first_name"]." ".$values["last_name"]."\r\n"; $msg.= "Absent or Present: ".$values["attendance_status"]."\r\n"; $msg.= "Class: ".$values["classname"]."\r\n"; $msg.= "Class Date: ".$values["attendance_date"]."\r\n"; $msg.= "Amount Received: ".$values["cash_received"]."\r\n"; $msg.= "Paid For: ".$values["cash_whatfor"]."\r\n"; $ret=runner_mail(array('to' => $email, 'subject' => $subject, 'body' => $msg, 'from'=>$from)); if(!$ret["Sent"]) echo $ret["message"];
Edited February 27, 2020 by leemo i wrote this code <?php $mail_to='XXX@gmail.com'; $subject_mail='UYYYY'; $message='XXXXX'; $headers = "MIME-Version: 1.0 \r\n"; $headers .= "Content-type: text/html; charset=UTF-8 \r\n"; $headers .= "From: XXX@gmail.com \r\n"; mail($mail_to, $subject_mail, $message, $headers ); ?> but the email will not send why please? Hi I have a form that I want people to fill out and then click the button and it sends me an email. My problem is that it doesn't send me any emails, I have looked around and I don't seem to find any thing. This is my form in application_form.php Code: [Select] <form action="application_form" method="POST"> <table border="0" cellpadding="5" cellspacing="0"> <tr> <td>Full name</td> <td><input type="text" size="30" maxlength="80" name="name" /></td> </tr> <tr> <td>Email address</td> <td><input type="text" size="30" maxlength="80" name="email" /></td> </tr> <tr> <td>Message</td> <td><textarea name="message" cols="29" rows="5"></textarea></td> </tr> <tr> <td> </td> <td><input type="submit" name="submit" value="Submit Message" /></td> </tr> </table> </form> and this is the php on the same application_form.php Code: [Select] <?php if (isset($_POST['submit'])) { // Collect variables $name = $_POST['name']; $email = $_POST['email']; $message = $_POST['message']; // Send email $body = "The following feedback has been submitted:\n\n"; $body .= "Name: $name\n"; $body .= "Email: $email\n"; $body .= "Message: $message"; mail ("cerberus478@gmail.com","Feedback Received",$body,"From: cerberus478@gmail.com"); // Output confirmation echo "<p>Your message has been received.</p>"; } ?> Hi guys, i have a custom made php that collect all the info in admin page (long story short), there's a button called "Approve" I would like to send back an email to user who applied with picture, once Approved button is pressed, so here's the script: <?php session_start(); $user = '123'; $pass = '123'; $to = $data['email']; $subject = 'blablabla'; $message = 'test123'; if (!isset($_SERVER['PHP_AUTH_USER']) || !isset($_SERVER['PHP_AUTH_PW']) || $_SERVER['PHP_AUTH_USER'] != $user || $_SERVER['PHP_AUTH_PW'] != $pass) { header('WWW-Authenticate: Basic realm="Enter password to access this page."'); header('HTTP/1.0 401 Unauthorized'); echo"You must be logged in to see this page."; exit; } ################## PROTECTED CONTENT ######################## require('./config.php'); ?> <!DOCTYPE HTML> <html> <head> <title>ADMIN PANEL</title> <style type="text/css"> body{width: 960px; margin: auto; margin-top: 20px; padding: 5px 20px; box-shadow: 0px 0px 2px #000000; border-radius: 5px;background:transparent url(images/bg_header.gif) top left repeat-x;} a:link,a:active,a:visited{color: inherit; text-decoration: none;} a:hover{text-decoration: underline;} .button{background:transparent url(images/grad.PNG) bottom left repeat-x; padding: 3px 5px; border-radius: 4px; border: 1px solid #cccccc;} .button:hover{border-color:orangered;text-decoration:none;} .approve .img{max-height: 200px; max-width: 200px; position: absolute; right: 5px; top: 5px;} .approve{display: block; height: 200px; overflow: hidden; box-shadow: 0px 0px 2px #000000; margin-top: 20px; padding: 20px; position: relative; font:13px verdana;} textarea,input{padding: 3px;font: 13px helvetica,verdana;border:1px solid rgb(51,151,251);border-radius: 4px;width: 300px; display: block; margin: 5px 0px;} input:hover,textarea:hover{border-color:orangered;cursor:pointer;} form{font:bold 13px verdana;} input[type='submit'],input[type='button']{width: auto;} </style> </head> <body> <?php echo" <div id='head'> <h1 align='center'>ADMIN PANEL</h1> <h4 align='center'><a href='index.php' class='button'>Homepage</a> <a class='button' href='admin.php'>Approval Queue</a> <a class='button' href='admin.php?edit'>Edit Image info.</a> <a class='button' href='?edit&view'>View Image Info.</a></h4> </div>"; if (isset($_GET['edit'])) { if (isset($_GET['pid'])) { $pic = mysql_query('SELECT * from `' . $table_name . '` WHERE pid = ' . intval($_GET['pid'])); if (mysql_num_rows($pic) == 1) { if (isset($_POST['submit'])) { $approved = isset($_POST['approved']) && $_POST['approved'] == '1' ? 1 : 0; mysql_query('UPDATE `' . $table_name . '` SET ' . 'first_name = "' . $_POST['first'] . '",' . 'last_name="' . $_POST['last'] . '",' . 'phone="' . $_POST['phone'] . '",' . 'email="' . $_POST['email'] . '",' . 'first_name="' . $_POST['first'] . '",' . 'approved=' . $approved . ',' . 'address="' . $_POST['addr'] . '",' . 'admin_desc="' . $_POST['admin_desc'] . '"' . ' WHERE pid = ' . intval($_GET['pid'])) or exit("Unable to edit" . mysql_error()); echo'<h3>EDITED</h3>'; $pic = mysql_query('SELECT * from `' . $table_name . '` WHERE pid = ' . intval($_GET['pid'])); } $data = mysql_fetch_array($pic); if (isset($_GET['view'])) { echo' <strong>Uploaded by </strong>' . $data['first_name'] . ' ' . $data['last_name'] . ' <br /> <img src="' . $default_dir . $data['image_name'] . '" style="max-width: 200px; max-height:200px; float: right;" /> <br /> <br /> <b>First_name :</b> ' . $data['first_name'] . ' <br /> <br /> <b>Last_name :</b> ' . $data['last_name'] . ' <br /> <br /> <b>Phone :</b> ' . $data['phone'] . ' <br /> <br /> <b>Email :</b> ' . $data['email'] . ' <br /> <br /> <b>Approved :</b> ' . ($data['approved'] == 1 ? 'Yes' : 'No') . ' <br /> <br /> <b>Address :</b> ' . $data['address'] . ' <br /> <br /> <b>Admin_description :</b> <br /> <br />' . $data['admin_desc'] . ' <br /> <br /> <a href="?edit&pid=' . $data['pid'] . '" class="button">Edit</a> <br /> <br /> '; } else { echo'<form method="POST" action="?edit&pid=' . intval($_GET['pid']) . '"> Editting photo: <a style="color:rgb(51,151,251);" href="' . $default_dir . $data['image_name'] . '">' . $data['image_name'] . '</a> uploaded by ' . $data['first_name'] . ' ' . $data['last_name'] . ' <br /> <img src="' . $default_dir . $data['image_name'] . '" style="max-width: 200px; max-height:200px; float: right;" /> <br /> First_name : <input type="text" name="first" value="' . $data['first_name'] . '" /> Last_name : <input type="text" name="last" value="' . $data['last_name'] . '" /> Phone : <input type="text" name="phone" value="' . $data['phone'] . '" /> Email : <input type="text" name="email" value="' . $data['email'] . '" /> Approved : <input type="text" name="approved" value="' . $data['approved'] . '" /> 0 or 1 Address : <textarea name="addr">' . $data['address'] . '</textarea> Admin_description : <textarea name="admin_desc">' . $data['admin_desc'] . '</textarea> <input type="submit" name="submit" value="Edit" /> </form>'; } } else { echo"NO SUCH PICTURE EXISTS"; } } else { echo" <h3>Search for image to " . (isset($_GET['view']) ? 'view' : 'edit') . " it: </h3> <form id='form' method='POST' action='admin.php?edit" . (isset($_GET['view']) ? '&view' : '') . "'> Uploader's first name: <input type='text' name='name' value='' /> OR Image name: <input type='text' name='img' value='' /> OR Email: <input type='text' name='email' value='' /> <input type='submit' name='submit' value='Search' /> </form>"; if (isset($_POST['submit'])) { $name = empty($_POST['name']) ? '%' : '%' . $_POST['name'] . '%'; $email = empty($_POST['email']) ? '%' : '%' . $_POST['email'] . '%'; $img = empty($_POST['img']) ? '%' : '%' . $_POST['img'] . '%'; $query = mysql_query( 'SELECT * from `' . $table_name . '` where ' . 'first_name like "' . $name . '" and ' . 'email like "' . $email . '" and ' . 'image_name like "' . $img . '"'); if (mysql_num_rows($query) > 0) { while ($pic = mysql_fetch_array($query)) { echo"<hr/><strong>Uploaded by $pic[first_name] $pic[last_name] " . date(' \a\t H:i \o\n d/m/Y', intval($pic['image_name'])) . "</strong> - <a href='$default_dir$pic[image_name]' target='_blank'>$pic[image_name]</a> <a href='?edit" . (isset($_GET['view']) ? '&view' : '') . "&pid=$pic[pid]' class='button'>" . (isset($_GET['view']) ? 'View' : 'Edit') . "</a>"; } } else { echo "NO IMAGE MATCHES THAT DESCRIPTION"; } } } exit; } if (isset($_GET['approve'])) { if (mysql_query('UPDATE `' . $table_name . '` SET approved = 1 WHERE pid = ' . intval($_GET['approve']))) { if (@mail($to, $subject, $message)) { echo('<p>Mail sent successfully.</p>'); } else { echo('<p>Mail could not be sent.</p>'); } echo"<h2>APPROVEDs</h2>"; } } It's not whole script though. Hello, I have a registration page and when a user registers I want to send their email an activation code. To test I have the following code. <?php //Send activation Email $to = $Email_address; $subject = "www.WEBSITE.com/"; $message = "Welcome to my website!\r\rYou, or someone using your email address, has completed registration at WEBSITE. You can complete registration by clicking the following link:\rhttp://www.WEBSITE.com/register.php?action=verify&$activationKey\r\r If this is an error, ignore this email and you will be removed from our mailing list.\r\rRegards,\ "; $headers = 'From: noreply@abc.com' . "\r\n" . 'Reply-To: noreply@abc.com' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers); if (mail($to, $subject, $message, $headers)) { echo 'Success'; } else { echo 'Error'; } ?> I have the last if else to see if it is sent to not. I do get a Success message, but I don't get an email at the address (I have checked the spam folder). I have checked the email address and it is correct. I have even waited a few hours and nothing. Why is the email not getting to my account? Hello, i have been looking for and answer on the internet but i couldn't find it! I'm new on PHP based on and example i wrote something like this for my website: //basic variables $EmailFrom = Trim(stripslashes($_POST['EmailFrom'])); $EmailTo = "example@mysite.org"; $Subject = "Registration u10"; $teamname = Trim(stripslashes($_POST['teamname'])); $affiliation = Trim(stripslashes($_POST['affiliation'])); $premier = Trim(stripslashes($_POST['premier'])); $challenge = Trim(stripslashes($_POST['challenge'])); $girls = Trim(stripslashes($_POST['girls'])); $boys = Trim(stripslashes($_POST['boys'])); //about 15 more variables go in here but i don't want to put them to save some space // validation $validationOK=true; if (Trim($EmailFrom)=="") $validationOK=false; if (!$validationOK) { print "<meta http-equiv=\"refresh\" content=\"0;URL=error.htm\">"; exit; } // email body text //this includes the info of all the variables at the top even the ones I didn't write in here (but you get the point ) $Body = ""; $Body .= "Team Name: "; $Body .= $teamname; $Body .= "\n"; $Body .= "\n"; $Body .= "AYSleague: "; $Body .= $aysleague; $Body .= "\n"; $Body .= "\n"; $Body .= "Flash Tournament: "; $Body .= $flashtournament; $Body .= "\n"; $Body .= "\n"; $Body .= "Spring 2011: "; $Body .= $spring2011; $Body .= "\n"; $Body .= "\n"; $Body .= "Summer 2011: "; $Body .= $summer2011; $Body .= "\n"; $Body .= "\n"; $Body .= "fall 2011: "; $Body .= $fall2011; $Body .= "\n"; $Body .= "\n"; // send email to my inbox with the information above $success = mail($EmailTo, $Subject, $Body, "From: <$EmailFrom>"); // if everything goes OK it will redirect them to another page if ($success){ print "<meta http-equiv=\"refresh\" content=\"0;URL=thanksu12.html\">"; } else{ print "<meta http-equiv=\"refresh\" content=\"0;URL=error.html\">"; } ?> the problem that i have is: (i divided it in 2 sections) 1- i need to sent a second email to the coach 2- that email only needs to have the information of 6 variables not the whole thing I don't know how to do it, if someone knows how to do it, i will appreciate some help!! thanks! Okay, I got the other parts of this script to input the form information into my database, but this part of the code is not sending the user the activation email. Please Help!? I've attached the complete script for an extra pair of eyes. Thanks /!!!!!!!!!!!!!!!!!!!!!!!!! Email User the activation link !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! $myemail = "admin@knirv.com"; $emess = "First Name: $firstname\n"; $emess.= "Last Name: $lastname\n"; $emess.= "Email 1: $email1\n"; $emess.= "Email 2: $email2\n"; $emess.= "City: $city\nState: $state\nZip/Post Code:$zip\n"; $emess.= "Country: $scountry\n"; $emess.= "Phone number 1: $phone1\n"; $emess.= "Phone number 2: $phone2\n"; $emess.= "Phone number 3: $phone3\n"; $emess.= "Comments: $sendmail"; $ehead = "From: $myemail\r\n"; $subj = "Complete knirv.com registration!"; $mailsend=mail("$myemail","$subj","$emess","$ehead"); //Begin HTML Email Message $message = "Hi $firstname, Complete this step to activate your login identity at knirv.com. Click the line below to activate when ready. http://www.knirv.com/activation.php?id=$id&sequence=$db_password If the URL above is not an active link, please copy and paste it into your browser address bar Login after successful activation using your: E-mail Address: $email Password: $password See you on the site! admin@knirv.com"; //end of message unset($_GET['do']); header("Location: thank_you.php"); break; } $msgToUser = "<h2>One Last Step - Activate through Email</h2><h4>OK $firstname, one last step to verify your email identity:</h4><br /> In a moment you will be sent an Activation link to your email address.<br /><br /> <br /> <strong><font color=\"#990000\">VERY IMPORTANT:</font></strong> If you check your email with your host providers default email application, there may be issues with seeing the email contents. If this happens to you and you cannot read the message to activate, download the file and open using a text editor. If you still cannot see the activation link, contact site admin and briefly discuss the issue.<br /><br /> "; include_once 'msgToUser.php'; exit(); } Hi I have a following code, validation part and jquery works perfectly in the code but it dosent send the email
I have jquery.js file in the head section of html and it work perfectly
contact.php
<div id="emailcontainer"> <div id="ack"> </div> <div id="emailsend"><img src="images/emailsend.gif"></img><br> <p>We will get back to you soon</p></div> <form id="contactform"> <div> <label for="name">NAME:</label> <input type="text" name="name" id="name" placeholder="John Doe" /> </div> <div> <label for="email">EMAIL:</label> <input type="text" name="email" id="email" placeholder="JohnDoe@example.com" /> </div> <div> <label for="comment">MESSAGE:</label> <textarea name="comment" rows="10" cols="50" id="comment"></textarea> </div> <input type="submit" name="submit" value="SEND" id="submit" /> </form> </div><!---div emailcontainer end here---> </div><!---div main end here--->this page does the validation part from php test.php <?php if(isset($_POST["submit"])) { $errors = array(); $name = $_POST['name']; $email = $_POST['email']; $comment = $_POST['comment']; $to = "reboosttechnologies@gmail.com"; $from = $_POST['email']; $headers = "From: $from"; $flag = false; $success = mail($to,$comment,$headers); $emailReg = '/^([a-z0-9_\.-]+)@([\da-z\.-]+)\.([a-z\.]{2,6})$/ '; if(!($name) || !($email) || !($comment)){ if(!$name){ $errors[]="Missing Name"; } if(!$email){ $errors[]="Missing Email"; } if(!$comment){ $errors[]="Missing Comment"; } $json_response = json_encode($errors); }elseif(!preg_match($emailReg,$email)){ $errors[] = "Not a valid email address"; $json_response = json_encode($errors); }elseif($success){ $flag = true; return $flag;}else{ $json_response = json_encode("Thanks for your comment"); } echo $json_response; } ?>this file does the jquery validation without page refresh function.js $(function(){ $("#emailsend").hide(); $("#submit").click(function(event) { event.preventDefault(); var emailReg = /^([a-z0-9_\.-]+)@([\da-z\.-]+)\.([a-z\.]{2,6})$/; var errors = false; var name = $('[name=name]').val(); var email = $('[name=email]').val(); var comment = $('[name=comment]').val(); $('.errors').remove(); if($("#name").val() == ""){ $("#name").after("<span class= 'errors'> Missing Name </span>"); errors = true; } if($("#email").val() == ""){ $("#email").after("<span class= 'errors'> Missing Email </span>"); errors = true; }else if(!emailReg.test($('#email').val())){ $("#email").after("<span class= 'errors'> Not valid Email </span>"); errors = true; } if($("#comment").val() == ""){ $("#comment").after("<span class= 'errors'> Missing Comment </span>"); errors = true; } if(errors == true) { return false; } else { input_data = { "name" : name, "email" : email, "comment": comment, "submit" : true } $.ajax({ type: 'post', url: 'test.php', data: input_data, dataType: 'json', success: function( msg ) { $("#ack").html(msg); $("#contactform").delay(500).slideUp(500); $("#emailsend").show(700); }, error: function() { $("#ack").html('ERROR!'); } }); } }); }); |