PHP - Moved: Ffmpeg Php Version 5.3.1

Hi all,

But of a PHP newbie so treat me nice but this one is driving me nuts 

I have the exact same login.php file running on two different servers and they have slightly different versions of PHP installed as follows:

1. PHP Version 5.0.4 - version http://www.trafficpaymaster.com/tpm/phpversion.php
2. PHP Version 5.2.15 - version http://www.dentistsinflorida.org/tpm/phpversion.php

The login works fine on the first server from he
http://www.trafficpaymaster.com/tpm/login.php

Email: test@test.com
Pwd: test

But try it on the second server he
http://www.dentistsinflorida.org/tpm/login.php

Using the same email and password (which is correct) it just loops round not letting the user into the main script at index.php

Question:  Why?
What have I got wrong for that later version of PHP?


Many thanks guys.

HI,
When I trying to covnert 3gp to FLV I got this error:

FFmpeg version SVN-r12665, Copyright (c) 2000-2008 Fabrice Bellard, et al.
  configuration: --enable-gpl --enable-postproc --enable-swscale --enable-avfilt
er-lavf --enable-pthreads --enable-liba52 --enable-avisynth --enable-libfaac --e
nable-libfaad --enable-libgsm --enable-memalign-hack --enable-libmp3lame --enabl
e-libnut --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid
 --cpu=i686 --extra-ldflags=-static
  libavutil version: 49.6.0
  libavcodec version: 51.54.0
  libavformat version: 52.13.0
  libavdevice version: 52.0.0
  built on Apr  2 2008 22:35:11, gcc: 4.2.3

Seems stream 0 codec frame rate differs from container frame rate: 29.97 (30000/
1001) -> 15.00 (15/1)
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'uploads/v_1.3gp':
  Duration: 00:01:03.6, start: 0.000000, bitrate: 189 kb/s
    Stream #0.0(und): Video: h263, yuv420p, 176x144 [PAR 12:11 DAR 4:3], 15.00 t
b(r)
    Stream #0.1(und): Audio: samr / 0x726D6173, 8000 Hz, mono
WARNING: The bitrate parameter is set too low. It takes bits/s as argument, not
kbits/s
Output #0, flv, to 'uploads/a.flv':
    Stream #0.0(und): Video: flv, yuv420p, 320x240 [PAR 1:1 DAR 4:3], q=2-31, 20
0 kb/s, 15.00 tb(c)
    Stream #0.1(und): Audio: libmp3lame, 22050 Hz, mono, 0 kb/s
Stream mapping:
  Stream #0.0 -> #0.0
  Stream #0.1 -> #0.1
Unsupported codec (id=73728) for input stream #0.1


What should I do?

Thanks

Hiya!

I need help! I have this script;


<?php session_start();

include 'system/template/template.php';
include 'system/mysql/mysql.php';
include 'system/properties/property.php';

$mysql = new mysql();
$mysql->connect();

$property = new property();


if(!$property->landlord_loggedin()) {
header('Location: login.php');
}

if(isset($_SESSION['N_P_ID']) && !empty($_SESSION['N_P_ID'])) {
if(isset($_POST['videotitle']) && !empty($_POST['videotitle']) && isset($_FILES['videofile']) && !empty($_FILES['videofile'])) {
$upload = $bad . '<form id="Upload" action="upload_video.php" enctype="multipart/form-data" method="post">
<h3>Upload a video of your property</h3>
<label>Video Title</label>
<input type="text" name="videotitle"><br />
<input type="file" name="videofile">

<label>Submit</label>
<input type="submit" name="submit" value="Upload"><br />
<a href="landlord_account.php">Skip</a>
</form>';

$extensions = array('mpg', 'avi', 'mpeg');
define ("MAX_SIZE","10240"); 

function getExtension($str) {
$i = strrpos($str,".");
if (!$i) {
return "";
}

$l = strlen($str) - $i;
$ext = substr($str,$i+1,$l);

return $ext;
}

if(isset($_FILES['imageone'])) {

if(!isset($_POST['videotitle'])) {
$bad = '<p class="bad">Please enter a video title.</p>';
$form = $upload;
}

$filename = stripslashes($_FILES['videofile']['name']);

$extension = strtolower(getExtension($filename));

if(!in_array($extension, $extensions)) {

$bad = '<p class="bad">Video is incorrect format, please make sure your video format is either mpg/mpeg or avi.</p>';
$form = $upload;

} else {

$size = filesize($_FILES['videofile']['tmp_name']);

if($size > MAX_SIZE*1024) {

$bad = '<p class="bad">Video too large.</p>';
$form = $upload;

}

$time = time();
$image_name = $time . '.' . $extension;
$newname = "uploads/properties/landlord_files/videos/" . $image_name;

if(move_uploaded_file($_FILES['videofile']['tmp_name'], $newname)) {
if($property->add_video($time, 'flv', $_POST['videotitle'])) {
$srcFile = 'uploads/properties/landlord_files/videos/' . $image_name;
$destFile = 'uploads/properties/landlord_files/videos/' . $time . '.flv';
$ffmpegPath = "/path/to/ffmpeg";
$flvtool2Path = "/path/to/flvtool2";

$ffmpegObj = new ffmpeg_movie($srcFile);
$srcWidth = makeMultipleTwo($ffmpegObj->getFrameWidth());
$srcHeight = makeMultipleTwo($ffmpegObj->getFrameHeight());
$srcFPS = $ffmpegObj->getFrameRate();
$srcAB = intval($ffmpegObj->getAudioBitRate()/1000);
$srcAR = $ffmpegObj->getAudioSampleRate();

$img = $image_name;
$ff_frame = $ffmpegObj->getFrame(1);

if($ff_frame) {
$gd_image = $ff_frame->toGDImage();
if($gd_image) {
imagepng($gd_image, $img);
imagedestroy($gd_image);
$property->add_image($img, 'png', 'frame_shot');
}
} 

exec($ffmpegPath . " -i " . $srcFile . " -ar " . $srcAR . " -ab " . $srcAB . " -f flv -s " . $srcWidth . "x" . $srcHeight . " " . $destFile . " | " . $flvtool2Path . " -U stdin " . $destFile);
@unlink($newname);
function makeMultipleTwo ($value) {
$sType = gettype($value/2);
if($sType == "integer") {
return $value;
} else {
return ($value-1);
}
}
$ref = 1;
} else {
@unlink($newname);
$bad = '<p class="bad">Video upload failed.</p>';
$form = $upload;
}
} else {
$bad = '<p class="bad">Video upload failed.</p>';
$form = $upload;

}
}
}

if($ref == 1) {
header('Location: landlord_account.php?page=3');
}

} else {
$form = '<form id="Upload" action="upload_video.php" enctype="multipart/form-data" method="post">
<h3>Upload a video of your property</h3>
<label>Video Title</label>
<input type="text" name="videotitle"><br />
<input type="file" name="videofile">

<label>Submit</label>
<input type="submit" name="submit" value="Upload"><br />
<a href="landlord_account.php">Skip</a>
</form>';
}

$template = new template();
$array = array('TITLE' => 'Upload A Video', 'CONTENT' => $form);

$template->newTemplate($array, 'add_property');
} else {
header('Location: landlord_account.php');
}
?>


When I click upload, nothing happens. I just get a blank template (from my template system).

Is there something I'm doing wrong here?

Many thanks,

James.

Hi,
I am using a php script for converting  avi,mpeg files  to flv with ffmpeg.my code is
Code: [Select]
$srcFile = "uploads/flame.avi";
    $destFile = "uploads/flame.flv";
    $ffmpegPath = "/usr/bin/ffmpeg";
    $flvtool2Path = "/usr/bin/flvtool2";

    $ffmpegObj = new ffmpeg_movie($srcFile);
    $srcWidth = 320;
    $srcHeight = 240;
    $command = $ffmpegPath . " -i " . $srcFile .  " -f flv -s " . $srcWidth . "x" .      $srcHeight . " " . $destFile . " | " . $flvtool2Path . " -U stdin " . $destFile;
    $convert = exec($command);
    if(!$convert)
    {
echo "FAILED!!!";
    }
    else
    {
        echo "SUCCESS";
    }I can create a flv file using this script.But sometimes it creates a flv file with size 0 k.I don't know why this is happening.With the same avi file,sometimes it creates correct flv file and sometimes flv with size 0k.How can I confirm whether the conversion is success. In both the cases it displays SUCCESS.

Hi,

I have limited experience of using PHP, but having done some searching around it would seem that it is possible to convert audio files that are uploaded through a web page to mp3 using ffmpeg. The audio files would be uploaded using the Uploadify script to subfolders that are named according to the user's login.

I would need the PHP script to be able to process all audio files that are either not in MP3 format, or are in MP3 format but greater than 192kbps, deleting the original file after the conversion. Am I right in thinking that this could be achieved using PHP, and if so, can anyone get me started with some code, or a link to a webpage with some code?

Also, I am currently using Hostpapa for hosting my website, and I understand that they don't include ffmpeg, and also don't allow ssh. I read on one website that I could still install a compiled version of ffmpeg on a shared server, but I am not sure if this means that it would work on Hostpapa, or whether I would need to change my host to get ffmpeg working.

Any advice on any of this would be welcome!

Thanks,

Nick

When I asked about adding a watermark to a video, this was suggested: "when scaling it, I'd do h/5:w/5 (of the source video), then position would be w/20 (5% from the left) and h-h/3 (75% of the way down)

When I asked about adding a watermark to a video, this was suggested: "when scaling it, I'd do h/5:w/5 (of the source video), then position would be w/20 (5% from the left) and h-h/3 (75% of the way down)"

I'd like to try that, but I don't know how to integrate that into my existing working code:

 $ffmpegCommand =''.$ffmpeg_b.' -y -i '.$video_file_full_path.' -i '.$watermark_image_full_path.' -filter_complex "scale=426:-2, overlay=10:10, " -vcodec libx264 -preset '.$pt->config->convert_speed.' -crf 26 '.$video_output_full_path_240.' 2>&1';

I've looked at the ffmpeg documentation, but need additional assistance. any help is appreciated

 

 

Hi all,   is it possible to install php version 5.2.3 on windows server 2012R2 ? will it work ? are they any security issues ?   Best regards, Amit menasahe      

HI,

I've upgraded from PHP version 5.2 to PHP version 5.4 and are not able to load / find mssql extension ?

How do I use MSSQL in version 5.4 ??

Is MSSQL not supported in this version or am I (hopingly) missing something ???

Regards
Dieter

I have a part of my code that requires php 5.3+ how can I test to see if the user has 5.3 or greater?

At first I thought this would be a good idea, but then I realized that it isn't such as a version: 5.2.10 (not sure if that is an actual version or not).
if((int)preg_replace("/\./", "", phpversion()) >= 530){
// Allow functionality
}

using my code, using 5.2.10 it would allow it, but it shouldn't because it isn't larger than 5.3.

what can I do?

 PHP Version : 5.3.28 is this outdated or what?   i run this on the server - which is configured and administered by a friend of me. i run a wordpress-cms   and i have issues with the image upload. all image uploads in the connections-plugin run in to a blank page       what can i do !?   i need your help and your ideas   love to hear from you   greetings

After being forced to have the server upgraded I am having problems with my 'reset password' pages.

What I wondered is, has there been any changes to PHP or MySQL between these versions ?

The PHP version was 5.2.9 and is now 5.2.14
The MySQL version was Client API version 5.0.45 and is now Client API version 5.0.90

Some one clicks a link like this.

www.site.com/resetpw.php?pwr=a1b2c3d4e5f6

the code would be a 32 char hash that is checked against the database, but my code now (which was never changed before or after the server change) seems to find the database line and update it but show the message that it was invalid ?  instead of showing the the message, your password will be sent to you after changing the DB

does anyone have any ideas ?

Code: [Select]
<?php
  include('includes/connection.php');
  include('includes/functions.php');
  date_default_timezone_set('Europe/London');

  if(isset($_POST['reset']) && trim($_POST['reset']) == 'Reset') {

    $email    = mysql_real_escape_string($_POST['email']);

    $checkVerify = mysql_query("SELECT account_id FROM customers WHERE email='$email' AND verified='No' LIMIT 1");
    $checkBanned = mysql_query("SELECT account_id FROM customers WHERE email='$email' AND suspended='Yes' LIMIT 1");

    if(!$email) {
      $thisError = 'Please enter your e-mail address.';
    } else if(!$password) {
      $thisError = 'Please enter your password.';
    } else if(mysql_num_rows($checkVerify)) {
      $thisError = 'Your account has not been approved by an Admin.';
    } else if(mysql_num_rows($checkBanned)) {
      $thisError = 'Your account has been suspended by an Admin.';
    } else {
      $password = md5($password);

      $checkAccount = mysql_query("SELECT account_id FROM customers WHERE email='$email' AND password='$password' LIMIT 1");
      if(mysql_num_rows($checkAccount)) {
        $_SESSION['FM_user'] = $email;
        header('Location: members.php'); exit;
      } else {
        $thisError = 'Your e-mail address and/or password is incorrect.';
      }
    }
  }

  include('includes/header.php'); 
?>
<body>

  <div class="headerBar">
<?php include('includes/navigation.php');?>
  </div>

  <?php headerText(); ?>

  <div class="content">
    <div class="widthLimiter contentStyle">
      <div class="formWrapper">
        <?php if(isset($thisError)) { echo '<div class="errorDiv">',$thisError,'</div>'; } ?>
        <?php if(isset($thisSuccess)) { echo '<div class="successDiv">',$thisSuccess,'</div>'; } ?>
        <span class="subHeader">Initiate Password Reset</span>
<?php
// include("sendmail2010.php");
$securitycode = ($_GET['pwr']);
//echo("53:security:".$securitycode.":<br>");
if ($securitycode != "") { $sql = "SELECT * FROM `customers` WHERE `changeofpasswordcode` = '".mysql_real_escape_string($securitycode)."' LIMIT 1";
//echo("54:sql:".$sql.":<br>");
$res = mysql_query($sql) or die(mysql_error());
//echo("57:<br>");
if (mysql_num_rows($res) != 0) {
//echo("59:sql:".$sql.":<br>");
$customerName = mysql_result($res, 0 ,'fullname');
$email = mysql_result($res, 0 ,'email');
$yourpasswordtologin = CreateNewPassword();
$format = 'Y-m-d H:i:s'; $date = date( $format );
$sql = "UPDATE `customers` SET `password` = '" . md5($yourpasswordtologin) . "', `password2` = '" . mysql_real_escape_string($yourpasswordtologin) . "', `changeofpasswordcode` = '', `newpasswordrequestedon` = '" . $date . "' WHERE `changeofpasswordcode` = '" . mysql_real_escape_string($securitycode) . "' LIMIT 1";
//echo("65:sql:".$sql.":<br>");
$res = mysql_query($sql) or die(mysql_error());
$_SESSION['customerName'] = $customerName;
$_SESSION['customerEmail'] = $email;
$_SESSION['generatePass'] = $yourpasswordtologin;
//echo("send email");
$sendemailnow = createEmailSend('newPassword', 'Your new password', 'customer');
//echo("email sent ".$sendemailnow);
?><div style="margin: 30px;">Thank you for completing your password reset process.<br><br>An email with a randomly generated password has been sent to your email address, please check your email account for this email as you will need this password to access your <?=$_SESSION['siteName'];?> account.<br><br><strong><em>Please check your 'spam folder' in case our emails are showing up there.</em></strong><br><br>You may now <a href="<?=$_SESSION['webAddress'];?>">sign in</a> to your account.</div><?php
//echo("72:end of IF send email<br>");
} else {
//echo("74 bad link<br>");
?><div style="margin: 20px;">Sorry the link you clicked is and old password reset link or is not valid, please delete the email.<br><br>If you were trying to reset your password, please click the<br>'Member Login' link on our site and then click the 'Reset Password' link.</div><?php
//echo("end of IF bad<br>");
}
//echo("78:end of first IF<br>");
} ?>
      </div>
    </div>
  </div>
<?php include('includes/footer.php');?>
</body>
</html>

This may sound like a really stupid question, but this is really bugging me.   If i code something in PHP 5.5.11 and upload it to a server that is running PHP 5.4, would the code work correctly? I didnt think there was a super amount of difference between the two versions. Perhaps im wrong.   The reason i asked is because someone has given me a project to help them with. Im running php 5.5.11. I coded it, tested in in xampp, working great. I upload it to his website, which he told me is currently running 5.4 (i tried phpinfo() but they have disabled it) and a majority of the functions i coded are no longer working. Things are not writing to the database, things collected from the database either dont show up on the website or they only show up when something gets posted after it, in which case the something posted after it doesnt show e.c.t.   Is the difference that much it can break code?   Thanks!

Hi

I have used in the past

search.php?sl=y

on a link to the page, and in the page I would use

if($_GET[$sl]=='y'){

Show somw stuff here

}

This was good in php 5.6, but I'm in the process of upgrading my code to the newer version, and am looking for an updated way to acheive this.

Help, pointers examples

Thanks in advance.

 

Paul

Can anyone tell me how I can find out which version of sqlsrv that I need to load to work with my IIS server and MSSQL server?