PHP - Socket Errors

Hi,

I'm extremely new to using sockets, but I think I have pretty straight-forward questions. What exactly is a "buffer"? I see people use a buffer and set a number for it (assuming size of the buffer... I guess?), but what's a good number to set it at then?

Hi I recently created a socket server in PHP and a client in actionscript, what the client does is send the X and Y and there ID to the server and then the server sends it back to the clients connected, my problem is it works but the X and Y start messing about and it duplicates sometimes, i'm pretty sure it is to do with the PHP server, this is my code:

Server:

Code: [Select]
<?php
/*
Raymond Fain
Used for PHP5 Sockets with Flash 8 Tutorial for Kirupa.com
For any questions or concerns, email me at ray@obi-graphics.com
or simply visit the site, www.php.net, to see if you can find an answer.
*/


// E_ALL is a named constant (bit of 2047)
// error_reporting(E_ALL) ensures any errors will be displayed
error_reporting(E_ALL);

// set_time_limit() is set to 0 to impose no time limit
set_time_limit(0);

// ob_implicit_flush() will push the whole message to flash (including any extra markups like terminating zeros)
ob_implicit_flush();

// address set to internal port for the socket to bind to and port set to something above 1024 so flash will connect
$address = '192.168.1.71';
$port = 9999;

//---- Function to Send out Messages to Everyone Connected ----------------------------------------
// $allclient is an array of resource id's that php will refer to for the sockets
// $socket contains the resource id for the flash client who sent the message
// $buf is just the message they sent, we are sending to everyone using a foreach loop
function send_Message($allclient, $socket, $buf) {
   foreach($allclient as $client) {
$phoneChunks = explode("=", $buf);
$pid = $phoneChunks[0];
$x = $phoneChunks[1];
$y = $phoneChunks[2];
// socket_write uses the $client resource id (which calls on the socket) and sends it our message (which is the second flag)
       socket_write($client, "$pid=$x=$y");
   echo "$pid=$x=$y \n";
   }
}



//---- Start Socket creation for PHP 5 Socket Server -------------------------------------

// socket_create function is pretty simple, depending on what you want it to do, you can just rig it for that,
// AF_INET is a "kind of" default address/protocol family that I have used,
// then socket_create takes and uses SOCK_STREAM, another default available socket type, 
// and uses a SOL_TCP protocol to have a guaranteed data sending. 
if (($master = socket_create(AF_INET, SOCK_STREAM, SOL_TCP)) < 0) {
   echo "socket_create() failed, reason: " . socket_strerror($master) . "\n";
}

// this little beauty is hard to understand, but very useful to our kind of chat
// we want to be able to reuse our sockets, so we set our $master socket with a level at SOL_SOCKET, 
// with it reusable (SO_REUSEADDR), and a "1" in the mixed optval spot to make it true.
socket_set_option($master, SOL_SOCKET,SO_REUSEADDR, 1);

// now we need to bind our socket to the address and port specified.
if (($ret = socket_bind($master, $address, $port)) < 0) {
   echo "socket_bind() failed, reason: " . socket_strerror($ret) . "\n";
}

// to allow our socket server to listen for incoming calls made by our flash client, we need
// to use socket_listen on our $master socket. The next flag indicates that only 5 calls at a time.
// any others will be refused until there is sufficient room to process a new call.
if (($ret = socket_listen($master, 5)) < 0) {
   echo "socket_listen() failed, reason: " . socket_strerror($ret) . "\n";
}


// this will allow an easy way to keep track of sockets connected to our server
$read_sockets = array($master);

//---- Create Persistent Loop to continuously handle incoming socket messages ---------------------
while (true) {
   $changed_sockets = $read_sockets;
   
   // socket_select is used here to see if there were any changes with the sockets that were connected before
   // $num_changed_sockets is here so you can check to see if the change is true or not with a subsequent function
   $num_changed_sockets = socket_select($changed_sockets, $write = NULL, $except = NULL, NULL);
   
   // we run a foreach function on $changed_sockets to see whether it needs to be added (if new), determine the message it sent
   // or determine if there was a socket disconnect
   foreach($changed_sockets as $socket) {
   
// now if the $socket currently being checked is the $master socket, we need to run some checks
// if not then we will skip down to else and check the messages that were sent
       if ($socket == $master) {
   
// socket_accept will accept any incoming connections on $master, and if true, it will return a resource id
// which we have set to $client. If this did not work then return an error, but if it worked, then add in 
// $client to our $read_sockets array at the end.
           if (($client = socket_accept($master)) < 0) {
               echo "socket_accept() failed: reason: " . socket_strerror($msgsock) . "\n";
               continue;
           } else {
               array_push($read_sockets, $client);
           }
       } else {
   
    // socket_recv just receives data from $socket as $buffer, with an integer length of 2048, and a mystery flag set to 0
// that mystery flag has no real documentation so setting it to 0 will solve it as others have done.
// we've also set it as a var $bytes in case we need to ensure data sending with socket_write, which is optional
           $bytes = socket_recv($socket, $buffer, 2048, 0);
   
   // if the $bytes we have is 0, then it is a disconnect message from the socket
   // we will just search for it as an index and unset that socket from our $read_sockets and
   // finish up with using socket_close to ensure it is closed off
           if ($bytes == 0) {
               $index = array_search($socket, $read_sockets);
               unset($read_sockets[$index]);
               socket_close($socket);
           }else{
        
// we need to make sure $read_sockets isn't messed with, so setting up a new variable called $allclients
// will ensure this. We then shift the array so that our $master socket is not included to the count when
// we send our data to all the other sockets in $allclients.
   $allclients = $read_sockets;
            array_shift($allclients);

// just a simple call on our premade function 'send_Message' with $allclients, $socket (current one), and $buffer (the message)
            send_Message($allclients, $socket, $buffer);
}
       }
      
   }
}
?>
This is my ActionScript 2, but I'm pretty sure this is not the problem:

Code: [Select]
_global.server_connected = false;
_global.mySocket = new XMLSocket();
mySocket.onConnect = function(success) {
if (success) {
msgArea.htmlText += "<b>Server connection established!</b>";
server_connected = true;
} else {
msgArea.htmlText += "<b>Server connection failed!</b>";
}
};
mySocket.onClose = function() {
msgArea.htmlText += "<b>Server connection lost</b>";
};
//incoming data from server.
var depthb = 6000;
var myArray = new Array();
mySocket.onData = function(msg) {
//msgArea.htmlText += msg;
myArray = msg.split('=');
if(_global.pid != myArray[0]) {
if(_root["players_" + myArray[0]]) { //if players exist
if(_root["players_" + myArray[0]]._x != myArray[1] || _root["players_" + myArray[0]]._y != myArray[2]) {
_root["players_" + myArray[0]]._x = myArray[1];
_root["players_" + myArray[0]]._y = myArray[2];
}
}
else
{
_root.players.duplicateMovieClip("players_" + myArray[0], 6000);
//_root["players_" + myArray[0]]._x = myArray[1];
//_root["players_" + myArray[0]]._y = myArray[2];
}
}
};
//connect to server.
_global.mySocket.connect("192.168.1.71", 9999);

If you are good with sockets and such then you should easily be able to spot the problem on why it's buggy, I cannot see what is wrong and really need the client and server to communicate properly.

It's OK when you connect alone, but when someone else joins it will start being glitchy and not going to the correct X and Y and then there will be duplicates and such..

If you do not understand I will try and get a demo up and show you what I mean.

Thanks.

I am trying to open as many sockets I can against my mail server to test if it is prown to attack.

I have tried to create 2000 sockets, but I can't seem to get it working and wondering if anyone knows whats going on?


<?php
$counter = 0;
createsocket:
$socket = socket_create(AF_INET, SOCK_RAW, tcp);
socket_connect($socket, "10.0.0.4", 25);
$counter++;
if ($counter != 2000) {
goto createsocket;
}
sleep(240);
socket_close($socket);
?>

Hi, sorry for the crosspost - I'm new here, and obviously asked my question in the wrong part of the forum. Can anyone help out with this knotty little problem?

http://www.phpfreaks.com/forums/index.php?topic=358418.0

TL;DR Do socket resources created by socket_accept take on the blocking properties of the master they were spawned from, or can you get granular control over them by calling socket_set_nonblock() on them individually?

Can someone give me a simple socket script that I can copy and paste.
It can return anything you like. I just want to make sure I have a working socket connection, and if not then you can maybe help me fix it.

Hi everyone!

I'm trying to create a socket TCP/IP server, i used this code which is already available @ php.net

Code: [Select]
<?php
error_reporting(E_ALL);

/* Allow the script to hang around waiting for connections. */
set_time_limit(0);

/* Turn on implicit output flushing so we see what we're getting
 * as it comes in. */
ob_implicit_flush();

$address = '0.0.0.0;
$port = 5000;

if (($sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP)) == false) {
    echo "socket_create() failed: reason: " . socket_strerror(socket_last_error()) . "<br \>";
}

if (socket_bind($sock, $address, $port) == false) {
    echo "socket_bind() failed: reason: " . socket_strerror(socket_last_error($sock)) . "<br \>";
}

if (socket_listen($sock, 5) == false) {
    echo "socket_listen() failed: reason: " . socket_strerror(socket_last_error($sock)) . "<br \>";
}

do {
    socket_set_nonblock($sock);
    if (($msgsock = socket_accept($sock)) == false) {
        echo "socket_accept() failed: reason: " . socket_strerror(socket_last_error($sock)) . "<br \>";
        socket_clear_error();
        break;
    }
    /* Send instructions. */
    $msg = "\nWelcome to the PHP Test Server. <br \>" .
        "To quit, type 'quit'. To shut down the server type 'shutdown'.<br \>";
    socket_write($msgsock, $msg, strlen($msg));

    do {
        if (false == ($buf = socket_read($msgsock, 2048, PHP_NORMAL_READ))) {
            echo "socket_read() failed: reason: " . socket_strerror(socket_last_error($msgsock)) . "<br \>";
            break 2;
        }
        if (!$buf = trim($buf)) {
            continue;
        }
        if ($buf == 'quit') {
            break;
        }
        if ($buf == 'shutdown') {
            socket_close($msgsock);
            break 2;
        }
        $talkback = "PHP: You said '$buf'.<br \>";
        socket_write($msgsock, $talkback, strlen($talkback));
        echo "$buf<br />";
    } while (true);
    socket_close($msgsock);
} while (true);

socket_close($sock);
?>

I've assigned the address to receive from anybody '0.0.0.0'

The problem is that it tells me:
socket_accept() failed: reason: Success

I searched a lot trying to figure this error out but found nothing. Any help, i'd be thankful?

Hi.
I've tried just about everything I can think of, but no success.

Here's the perl I'm trying to convert:

$socket = new IO::Socket::INET ( PeerAddr => 'localhost', PeerPort => 1500, Proto => 'tcp');
if ($socket->send("$token\n")) {
    $data = <$socket>;
}

Here's what I've currently got in PHP:

$socket = fsockopen('localhost', 1500, $errno, $errstr);
fwrite($socket, "$token\n");
$data = fread($socket, 1024);
fclose($socket);

I've confirmed the socket descriptor is populated and the fwrite is working.
The fread just hangs.
I've tried fputs/fgets in various combinations, but the read/get always hangs.

Any ideas?

Thanks very much,
Rick

Hello guys,

I'm trying to learn and understand the process of connecting a client to TCP connection!

Now I'm trying to build a mobile chat application which I want it to connect to my server (hosted in media temple) which I hate about media temple is the way they name the variable we used to know like "localhost" to some random strange string!

anyway that's not the topic. But you got the idea it's a chat app as the client on a mobile device! that will try to connect to my server.

Now I have tried sooo many scripts, tutorials ... etc. But I didn't get it. I need to know the process or even get it to work so I'll be able to know what's going on from the code.

Here's what I have (as of now) on the mobile (client side):


// create the socekt object
var socket = Titanium.Network.createTCPSocket({

hostName:"mywebsite.com", 

port:4446,  // some port I just typed because I don't know what port!

mode:Titanium.Network.READ_WRITE_MODE
});

// connect button
connectBtn.addEventListener('click', function() {

if(socket.isValid == false){

try {

socket.connect();

    socket.listen();

    messageLabel.text = 'Opened!';

} catch (e) {

    messageLabel.text = 'Exception: '+e;

}

}
});


// reader listener 
socket.addEventListener('read', function(e) {

Ti.API.info(JSON.stringify(e));

Ti.API.info(e['from'] + ':' + e['data'].text);
});

//writer button
writeButton.addEventListener('click', function() {

try {

socket.write("writing...this");

} catch (e) {
                alert(e);

}
});



//##
//##    Credits goes to people in: http://www.functionblog.com/?p=67=1#viewSource
//##

<?php
// PHP SOCKET SERVER
error_reporting(E_ERROR);
// Configuration variables
$host = "127.0.0.1";
$port = 4041;
$max = 20;
$client = array();

// No timeouts, flush content immediatly
set_time_limit(0);
ob_implicit_flush();

// Server functions
function rLog($msg){
             $msg = "[".date('Y-m-d H:i:s')."] ".$msg;
             print($msg."\n");

}
// Create socket
$sock = socket_create(AF_INET,SOCK_STREAM,0) or die("[".date('Y-m-d H:i:s')."] Could not create socket\n");
// Bind to socket
socket_bind($sock,$host,$port) or die("[".date('Y-m-d H:i:s')."] Could not bind to socket\n");
// Start listening
socket_listen($sock) or die("[".date('Y-m-d H:i:s')."] Could not set up socket listener\n");

rLog("Server started at ".$host.":".$port);
// Server loop
while(true){
             socket_set_block($sock);
             // Setup clients listen socket for reading
             $read[0] = $sock;
             for($i = 0;$i<$max;$i++){
                          if($client[$i]['sock'] != null)
                                       $read[$i+1] = $client[$i]['sock'];
             }
             // Set up a blocking call to socket_select()
             $ready = socket_select($read,$write = NULL, $except = NULL, $tv_sec = NULL);
             // If a new connection is being made add it to the clients array
             if(in_array($sock,$read)){
                          for($i = 0;$i<$max;$i++){
                                       if($client[$i]['sock']==null){
                                                    if(($client[$i]['sock'] = socket_accept($sock))<0){
                                                                 rLog("socket_accept() failed: ".socket_strerror($client[$i]['sock']));
                                                    }else{
                                                                 rLog("Client #".$i." connected");
                                                    }
                                                    break;
                                       }elseif($i == $max - 1){
                                                    rLog("Too many clients");
                                       }
                          }
                          if(--$ready <= 0)
                          continue;
             }
             for($i=0;$i<$max;$i++){
                          if(in_array($client[$i]['sock'],$read)){
                                       $input = socket_read($client[$i]['sock'],1024);
                                       if($input==null){
                                                    unset($client[$i]);
                                       }
                                       $n = trim($input);
                                       $com = split(" ",$n);
                                       if($n=="EXIT"){
                                                    if($client[$i]['sock']!=null){
                                                                 // Disconnect requested
                                                                 socket_close($client[$i]['sock']);
                                                                 unset($client[$i]['sock']);
                                                                 rLog("Disconnected(2) client #".$i);
                                                                 for($p=0;$p<count($client);$p++){
                                                                              socket_write($client[$p]['sock'],"DISC ".$i.chr(0));
                                                                 }
                                                                 if($i == $adm){
                                                                              $adm = -1;
                                                                 }
                                                    }
                                       }elseif($n=="TERM"){
                                                    // Server termination requested
                                                    socket_close($sock);
                                                    rLog("Terminated server (requested by client #".$i.")");
                                                    exit();
                                       }elseif($input){
                                                    // Strip whitespaces and write back to user
                                                    // Respond to commands
                                                    /*$output = ereg_replace("[ \t\n\r]","",$input).chr(0);
                                                    socket_write($client[$i]['sock'],$output);*/
                                                    if($n=="PING"){
                                                                 socket_write($client[$i]['sock'],"PONG".chr(0));
                                                    }
                                                    if($n=="<policy-file-request/>"){
                                                                 rLog("Client #".$i." requested a policy file...");
                                                                 $cdmp="<?xml version=\"1.0\" encoding=\"UTF-8\"?><cross-domain-policy xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:noNamespaceSchemaLocation=\"http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd\"><allow-access-from domain=\"*\" to-ports=\"*\" secure=\"false\" /><site-control permitted-cross-domain-policies=\"master-only\" /></cross-domain-policy>";
                                                                 socket_write($client[$i]['sock'],$cdmp.chr(0));
                                                                 socket_close($client[$i]['sock']);
                                                                 unset($client[$i]);
                                                                 $cdmp="";
                                                    }
                                       }
                          }else{
                                       //if($client[$i]['sock']!=null){
                                                    // Close the socket
                                                    //socket_close($client[$i]['sock']);
                                                    //unset($client[$i]);
                                                    //rLog("Disconnected(1) client #".$i);
                                       //}
                          }
             }
}
// Close the master sockets
socket_close($sock);
?>


I just want to understand how am I gonna implement this! I need to know how does it work!

You help is much appreciated!

Hello,

I'm trying to update my database with current statistics from my gameservers, but running the loop of socket connections to all of the servers on page load takes too long. For every server in the array it takes roughly 4 seconds to complete each one.. with a massive list of say 42 it takes awhile. However, I'm running from shared hosting and was wondering if that was the reason each server takes so long to query. I was thinking about running a cron job every 1 minute to update the information so it's still relativity new and current. Will the 1 minute cron job affect anything from the shared hosting? I'm using 1and1 web-hosting on a 1&1 Business Package.

Thanks

Hi all, i am running a php based virtual airline for a flightsimulator (free and open source) www.flightgear.org

i am interested in creating a page where i can have members connect to the sim via localhost and port which will then read data sent from the sims internal server.

i can send data via tcp by creating the port via the simulator


I can create a protocol file so the server knows what data i am requesting (in the image above there is a protocol file "squawk" already requested.

i know i can use fsocket_create etc or thats the theory. The socket would need to remain open from start to finish as data would be constantly changing.

Any pointers would be appreciated.

Thanks
Alex

Hi, i'm developing an app in wampp, i'm usually use cUrl but this time i wanted to try sockets for a change and more portability.
I have followed the basic socket structure but i can't connect.

So this is my code:
Code: [Select]
function googlear($search,$filtro,$safe)
{
//Abrimos el socket
$socket = fsockopen( "www.google.com", 80, $errno,$errdesc);
if (!$socket) {print "$errstr ($errno)<br/>\n";die;};

$busqueda = "search?q=".$search."&num=100";//Solo me va a tirar 100 resultados por ahora, para ir pasando de pagina arranco de start=0 y voy sumando de a 100 para pasar de pagina.

if($safe = true)
{
$busqueda = $busqueda . "&safe=active";
}
if($filtro != true)
{
$busqueda = $busqueda . "&filter=0";
}

$request = "GET $busqueda HTTP/1.1\r\n";
$request .= "Host: www.google.com\r\n";
$request .= "User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1\r\n";
$request .= "Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\r\n";
$request .= "Accept-Language: es-ar,es;q=0.8,en-us;q=0.5,en;q=0.3";
$request .= "Accept-Encoding: gzip, deflate\r\n";
$request .= "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7\r\n";
$request .= "Connection: keep-alive\r\n";

//Mando las cabeceras con el socket como resource
fputs($socket, $request);
while(!feof($socket))
{
$busqueda[] = fgets($socket, 1024);
}

//Cerramos
fclose($socket);

return count($busqueda);
}

As you can see i'm doing a GET and waiting for the count of lines of the array as result (just to test), but i'm getting "Fatal error: Maximum execution time of 30 seconds exceeded in [...]". It can't take that long to make a GET Request...

Any clues?

This topic has been moved to Third Party PHP Scripts.

http://www.phpfreaks.com/forums/index.php?topic=312186.0

Hi, I have been searching all day but can't find a solution to this using PHP.


Basically were developing a CRM at work and wish to be able to print letters remotely using PHP.


We have a printer equipped with a network card and I want to be able to fire requests to a socket listener port and have it print template documents depending on the request.


So far all I've found is something called Line Printing Terminal which apparently can be called from command line as far as I understand.


My boss has currently had me code a VB.NET script with two browser windows and it refreshes every 30 seconds, gets a url from a div element in the page and prints the webpage but I don't like this way, I think it's a sloppy hack and wastes bandwidth.


Like I say, ideally I would like to fire requests at a port via the printservers IP address but we could have the printer set as default on the server on which the printing script would run.


Any help/advice or resources would be greatly appreciated.

I have a hosted VPS running PHP 7.3.5 and a local RPi running 7.0.33, and will refer to them as VPS and RPi.  I also have the following very basic socket client and server.

The server on the VPS and the client on the RPi using TCP works great and so does both the  server and the client on the VPS using TLS. 

But when I put the server on the VPS and the client on the RPi using TLS, I can only send relatively short packages (approximately 2,600 characters).  And there is no hard limit because one moment 2,628 characters works, but then a little later 2,619 will not. 

Does it look like something I am doing wrong or maybe upgrading PHP on the RPi will help?

Thank you

<?php
require 'simple_common.php';
$loop = React\EventLoop\Factory::create();
$connector = new React\Socket\Connector($loop);
logger("simple client is running using ".($tls?'tls':'tcp'));
if($tls) {
    $sslContextOptions = [
        'peer_name'=> get('peer_name'),
        //'verify_peer'=>false,
        //'verify_peer_name'=>false,
        'allow_self_signed'=>true,
        'cafile' => get('cafile'),   //Certificate Authority file used with verify_peer.  Use public cert since selfsigned?
        //'verify_depth' not set and defaults to none
        //'ciphers' not used and defaults to DEFAULT
        //'capath'=>null, //Not needed since cafile is given
        //'CN_match' and 'SNI_server_name' are depreciated and peer_name should be used instead.
    ];
    $connector = new React\Socket\SecureConnector($connector, $loop, $sslContextOptions);
}
$connector->connect(get('ipPort'))->then(function (React\Socket\ConnectionInterface $connection) use ($loop) {
    logger("onConnection");
    setEvents($connection, 'client');
    $string=str_repeat(substr(str_repeat('0123456789',10),0,-1), 26).'023456789023456789023456789023456789023456789023456789';
    logger("write strlen: ".strlen($string));
    logData('write', $string);
    $connection->write($string);
});
$loop->run();

<?php
require 'simple_common.php';
$loop = React\EventLoop\Factory::create();
logger("simple server is running using ".($tls?'tls':'tcp'));

$socket = new React\Socket\Server(get('ipPort'), $loop);

if($tls) {
    $sslContextOptions = [
        'local_cert' => get('local_cert'), //local certificate file w/ or w/o private key
        'local_pk' => get('local_pk'),    //Only needed if private key is not in local_cert
        //'passphrase' not set as local_cert is not encoded
        //'capture_peer_cert'=>true, //a peer_certificate context option will be created containing the peer certificate
        //'capture_peer_cert_chain'=>true, //a peer_certificate_chain context option will be created containing the certificate chain.
        //'SNI_enabled'=>true, //server name indication will be enabled. Enabling SNI allows multiple certificates on the same IP address.
        //'disable_compression'=>true,  //disable TLS compression. This can help mitigate the CRIME attack vector.
        //'peer_fingerprint'=>[]    //A hash or array of hashes which the remote certificate digest must match.
    ];
   $socket = new React\Socket\SecureServer($socket, $loop, $sslContextOptions );
}

$socket->on('connection', function (React\Socket\ConnectionInterface $connection) use ($loop) {
    logger('onConnection');
    setEvents($connection, 'server');
    $loop->addPeriodicTimer(1, function ($timer) use ($connection) {
        $data='Hello!';
        logData('write', $data);
        $connection->write($data);
    });
});
$socket->on('error', function (\Exception $e) {
    logger('onServerError: '.$e->getMessage());
});
$loop->run();

<?php
function setEvents($connection, string $type){
    $connection->on('data', function ($data)use($type) {
        static $totalLng=0;
        $curLng=strlen($data);
        $totalLng+=$curLng;
        logger("$type onData: current: $curLng  total: $totalLng");
        logData('read', $data);
    });
    $connection->on('error', function (\Exception $e)use($type) {
        logger("$type onError: ".$e->getMessage());
    });
    $connection->on('close', function()use($type) {
        logger("$type onClose");
    });
    $connection->on('end', function()use($type) {
        logger("$type onEnd");
    });
    $connection->on('drain', function()use($type) {
        logger("$type onDrain");
    });
    $connection->on('pipe', function()use($type) {
        logger("$type onPipe");
    });
}

function emptyLog($type){
    $f = @fopen(get($type), "r+");
    if ($f !== false) {
        ftruncate($f, 0);
        fclose($f);
    }
}

function logData($type, $string){
    file_put_contents(get($type), $string,  FILE_APPEND);
}

function logger($msg){
    echo($msg.PHP_EOL);
    syslog(LOG_INFO, $msg);
}

function get($name){
    $map = [
        'ipPort'=>'184.154.134.91:1338',
        'peer_name'=>'tapmeister.com',
        'cafile'=>'test_ss_crt.pem',   //Use public cert since selfsigned?  Why does even test_ss_csr.pem work?
        'local_pk'=>'test_ss_key.pem',
        'local_cert'=>'test_ss_crt.pem', //Why does even test_ss_csr.pem work?
        'read'=>'raw_read_stream.log',
        'write'=>'raw_write_stream.log',
        'tls'=>true,
    ];
    if(!isset($map[$name])) exit("Invalid name $name");
    return $map[$name];
}

ini_set('display_startup_errors', '1');
ini_set('display_errors', '1');
error_reporting(E_ALL);
require 'vendor/autoload.php';
$tls=$argv[1]??get('tls');
emptyLog('write');
emptyLog('read');

 

I write a code for listening data from multiple client but it shows error:- Warning: socket_bind() [function.socket-bind]: unable to bind address [99]: Cannot assign requested address in /home3/asgvcom/public_html/server/index.php on line 19 Could not bind to address  so please suggest how can i resolve this problem.