|
PHP - Mime Php Script Stops Working - No Change To Code
Thanks in advance for any help you can provide on this. Bob G.
BACKGROUND: I have an app that is hosted on Host Monster and its script includes a Class that is supposed to send MIME emails with or without attachments using only MIME types text, html, and image. It was working fine. I hadn't worked with or on it for about two months then found, last week, that it would no longer send emails even though the script runs without any Warnings. I've worked on this for several days now and I'm stuck. EXPECTED BEHAVIOR: When the script runs, it should send a simple text only email to a given email address and an more complex email that requires html and an in-line image in the body and an attachment with the same image. The image type is jpeg. ACTUAL BEHAVIOR: The script runs to completion with no Warning but sends neither of the two emails. CODE: Attached and cc'd below is a script which mimics the code in my app and the actual behavior described above but only for the simple email mentioned above. To simplify debug I've commented out that part of the script that should send out the more complex email mentioned above. Note: You can run the script by going to http://www.unitresearch03.com/Admin/SendUserEmailHM01.php Note: Line 6 can be changed to your own email address for testing BEGIN CODE: Code: [Select] <?php //TOP LINE CODE ////SIMPLE MIME EMAIL CODE - NO ATTACHMENTS ////////////////////////////////////////////// $mail = new mime_mail ; $mail->from = "ragsr@ix.netcom.com" ; $mail->to = "ragsr@ix.netcom.com" ; $mail->subject = "SIMPLE MIME EMAIL - NO ATTACHMENTS" ; $mail->body = "SIMPLE MIME EMAIL BODY" ; $mail->send() ; ////END OF SIMPLE MIME EMAIL CODE //////////////////////////////////////////////////////// ////START MIME EMAIL CODE - ALLOWS ATTACHEMENTS ///////////////////////////////////////////////// //SIMPLE SEND EMAIL PG.448 PHP REFERENCE PLUS ATTACHMENT EXAMPLE FROM SAME PAGE //include "mime_mail.inc"; //THIS CAUSED A WARNING AND, APPARENTLY, IS NOT REQUIRED. CODE OK W/O IT //READ FILE $filename="/home1/unitcons/public_html/unitresearch03/TCStripComposition-27Cb.jpg" ; $content_type="image/jpeg" ; //OPEN, EXTRACT DATA, THEN CLOSE FILE $fd=fopen($filename, "r") ; $data=fread($fd, filesize($filename)) ; fclose($fd) ; $fileX="/home1/unitcons/public_html/unitresearch03TCStripComposition-27Cb.jpg" ; $ftype=filetype ($filename) ; $fsize=filesize($filename) ; //echo "FILE TYPE :"."$ftype"."<br>" ; //echo "FD FILE TYPE :"."$fdltype"."<br>" ; //echo "DATA :"."$data"." END DATA"."<br>" ; //echo "FSIZE :"."$fsize"."<br>" ; //echo "FDSIZE :"."$fsize"."<br>" ; //echo "FD :"."$fd"."<br>" ; //CREATE OBJECT INSTANCE $mail = new mime_mail ; //SET ALL DATA SLOTS $mail->from = "thromptmweeklycs@unitresearch03.com" ; $mail->to = "ragsr@ix.netcom.com" ; $mail->subject = "XXXThrompTM Weekly Comic Strip - Week of 6/20/201" ; $mail->body = "<html>Hope you enjoy your ThrompTM today! <br> <br> <br> <img src=http://www.unitresearch03.com/TCStripComposition-27Cb.jpg height='197' width='500' > </html>"; //DEFINE ATTACHMENT $name = $fileX ; $message = $data ; //ADD ATTACHEMENT //$mail->add_attachment ($data, $filename, $content_type) ; //SEND EMAIL //$mail->send() ; ////EBD SEND EMAIL WITH ATTACHMENT ////MIME CLASS class mime_mail { var $parts; var $to; var $from; var $headers; var $subject; var $body ; /* * void mime_mail() * class constructor */ function mime_mail () { $this->parts = array() ; $this->to = "" ; $this->from = "" ; $this->subject = "" ; $this->body = "" ; $this->headers = "" ; } /* * void add_attachement (string message, [string name], [string ctype]) * Add an attachment to the mail object */ function add_attachment ($message, $name = "", $ctype = "text/html jpeg" ) //function add_attachment ($data, $fileX, $content_type ) { echo "CTYPE IN AA :"."$ctype"."<br>" ; //echo "MESSAGE IN AA :"."$message"."<br>" ; echo "ENCODE IN AA: "."$encode"."<br>" ; echo "NAME IN AA :"."$name"."<br>" ; //echo "DATA IN AA :"."$data"."<br>" ; $partsd = $this->parts[] = array ( "ctype" => $ctype, "message" => $message, "encode" => $encode, "name" => $name, ); echo ("ARRAY#1 CTYPE :"."$partsd[ctype]"."<br>") ; //echo ("ARRAY#2 MESSAGE :"."$partsd[message]"."<br>") ; echo ("ARRAY#3 ENCODE :"."$partsd[encode]"."<br>") ; echo ("ARRAY#4 NAME :"."$partsd[name]"."<br>") ; //echo ("ARRAY#5 DATA :"."$partsd[data]"."<br>") ; $sizeX=sizeof($this->parts) ; echo "SIZE OF ARRAY IN ADD ATTACHMENT:"."$sizeX"."<br>" ; } /* * void build_message (array part= * Build message parts of an multipart mail */ function build_message ($part ) { $message = $part[ "message"]; //echo "MESSAGE IN BUILD:"."$message"."<br>" ; $message = chunk_split(base64_encode($message)) ; //echo "MESSAGE :"."$message"."<br>" ; $encoding = "base64" ; $partctype = $part["ctype"] ; $partname = $part["name"] ; echo "PART CTYPE :"."$partctype"."<br>" ; echo "PART NAME :"."$partname"."<br>" ; return "Content-Type: ".$part["ctype"]. ($part["name"]?" ; name =\"". $part["name"]. "\"":""). "\nContent-Transfer-Encoding: $encoding\n\n$message\n" ; } /* * void build_multipart() * Build a multipart mail */ function build_multipart() { $boundary = "b".md5(uniqid(time())) ; $multipart = "Content-Type: multipart/mixed; boundary = $boundary\n\nThis is a MIME encoded message.\n\n--$boundary" ; //$sizeX=sizeof($this->parts) ; //echo "SIZE OF ARRAY :"."$sizeX"."<br>" ; for ($i = sizeof($this->parts)-1; $i >= 0; $i--) { $multipart .= "\n".$this->build_message($this->parts[$i])."--$boundary" ; //echo "MULTIPART :"."$multipart"."<br>" ; } return $multipart.= "--\n" ; } /* * string get_mail() * returns the constructed mail */ function get_mail($complete = true) { $complete = true ; echo "COMPLETE :"."$complete"."<br>" ; ////STAEMENT ADDED TO FORCE IF ($COMPLETE) {} BELOW TO RUN //echo "MESSAGE IN GET MAIL:"."$message"."<br>" ; $mime = "" ; if (!empty($this->from)) $mime .= "From: ".$this->from. "\n" ; echo "MIME 1:"."$mime"."<br>"; if (!empty($this->headers)) $mime .= $this->headers. "\n" ; echo "MIME 2:"."$mime"."<br>"; if ($complete) { echo "MIME 3:"."$mime"."<br>"; if (!empty($this->to)) { $mime .= "To: $this->to\n" ; echo "MIME 4:"."$mime"."<br>"; } if (!empty($this->subject)) { $mime .= "Subject: $this->subject\n" ; echo "MIME 5:"."$mime"."<br>"; } } if (!empty($this->body)) $this->add_attachment($this->body, "", "text/html"); echo "MIME 55:"."$mime"."<br>"; $mime .= "MIME-Version: 1.0\n".$this->build_multipart() ; echo "MIME 6:"."$mime"."<br>"; return $mime; } /* * void send() * Send the mail (last class-function to be called) */ //function send ($message, $data, $fileX, $content_type) function send () { //$bodyY=$this->body ; //echo "BODYY :"."$bodyY"."<br>" ; $mime=$this->get_mail () ; echo "MIME 7:"."$mime"."<br>" ; mail($this->to, $this->subject, "" , $mime) ; //mail($this->to, $this->subject, $this->body, $mime) ; } } ; ////END OF MIME CLASS CODE ///////////////////////////////////////////////////////////////// ?>END CODE: Similar TutorialsThis is completely different code than my change password script thread. This is not double posting. Whenever I use this script to change my email, it just changes the email to nothing (blank). What could be wrong with it? Help is hugely appreciated. I know you don't have to use your valuable time to help me. <?php // I removed the connect to db part session_start(); $username = $_SESSION['username']; $email = $_POST['email']; $newemail = $_POST['newemail']; $confirmnewemail = $_POST['confirmnewemail']; $result = mysql_query("SELECT email FROM members WHERE username='$username'"); if($email!= mysql_result($result, 0)) { echo "The email address you entered is incorrect."; } if($newemail==$confirmnewemail) $sql=mysql_query("UPDATE members SET email='$newemail' where username='$username'"); if($sql) { echo "You have successfully changed your email address."; } else { echo "The new email and confirm new email fields were different."; } ?> I have a php script that calls another script. It seems that the 2nd script times out or something. I have tried setting max_execution_time to 120 seconds. how can I fix this? I open to anything. Thanks hi, my website is premade website wich i am editing it has these different blocks, and i want to change them in one of those blocks i want a timer that counts down, ive done this with refreshing a div with jquery on other pages, and thats working now i want a downcounting timer in a block, but when i do that another block stops working a block that has a slider of images that slide over ... now i think it has something todo with the document ready function? that stops the other block from working ? u can see it failing here http://www.acidleague.com and this is the code im using inside the block Code: [Select] <script src='http://code.jquery.com/jquery-latest.js'></script> <script> $(document).ready(function() { $('#responsecontainer').load('response.php'); var refreshId = setInterval(function() { $('#responsecontainer').load('response.php'); }, 5000); $.ajaxSetup({ cache: false }); }); </script> <div id="cols-left"> <div class="top_left_block"> <div class="llbg"></div> <div class="top_left_rbg"></div> <div class="rmlbg"></div> <div class="clr"></div> </div> <div style="min-height: 223px;background:#373737;"> <div align="right" style="padding-right:10px;font-size:11px;min-width: 336px;min-height: 44px; background:url(./theme/neo-blue/images/bg/news.png) no-repeat top center transparent;"> <b><span style="color:#055ed5;"><?echo"MINI"?> </span> <?php echo"AGENDA"?></b> </div> <div align="center" style="margin-left:5px; margin-top:-19px;"> <span style="color:#000000;"><b><?php echo"UPCOMING MATCH"?></b></span> <table cellpadding="0" cellspacing="0" width="100%"> <tr> <td> <div id="responsecontainer"></div> </td> </tr> </table> </div> </div> <div class="bot_left_block"> <div class="lbotlbg"></div> <div class="top_bot_lbg"></div> <div class="rbotlbg"></div> <div class="clr"></div> </div> </div> I am creating a 'stream' page with like buttons under each status. It works untill the div is reloaded with new content. I have researched this and it appears to be due to the new content not being loaded into the DOM. Does anyone know a solution? I have found a few strange ones, for example, forcing a window resize. I tried that but it didn't work. Thanks, hello, when i add Code: [Select] echo $row['img']; to the code below it prevents it from working correctly. Have I written the line correctly or is there another underlying cause? any help greatly appreciated. working = http://www.1pw.co.uk/demo2.php not working = http://www.1pw.co.uk/demo.php Code: [Select] <?php define('INCLUDE_CHECK',1); require "../#########.php"; if(!$_POST['img']) die("There is no such product!"); $img=mysql_real_escape_string(end(explode('/',$_POST['img']))); $row=mysql_fetch_assoc(mysql_query("SELECT * FROM internet_shop WHERE img='".$img."'")); echo $row['img']; echo '{status:1,id:'.$row['id'].',price:'.$row['price'].',txt:\'\ \ <table width="100%" id="table_'.$row['id'].'">\ <tr>\ <td width="60%">'.$row['name'].'</td>\ <td width="10%">$'.$row['price'].'</td>\ <td width="15%"><select name="'.$row['id'].'_cnt" id="'.$row['id'].'_cnt" onchange="change('.$row['id'].');">\ <option value="1">1</option>\ <option value="2">2</option>\ <option value="3">3</option></slect>\ \ </td>\ <td width="15%"><a href="#" onclick="remove('.$row['id'].');return false;" class="remove">remove</a></td>\ </tr>\ </table>\'}'; ?> not sure if needed but this is the file that includes the above file.... Code: [Select] var purchased=new Array(); var totalprice=0; $(document).ready(function(){ $('.product').simpletip({ offset:[40,0], content:'<img src="img/ajax_load.gif" alt="loading" style="margin:10px;" />', onShow: function(){ var param = this.getParent().find('img').attr('src'); if($.browser.msie && $.browser.version=='6.0') { param = this.getParent().find('img').attr('style').match(/src=\"([^\"]+)\"/); param = param[1]; } this.load('ajax/tips.php',{img:param}); } }); $(".product img").draggable({ containment: 'document', opacity: 0.6, revert: 'invalid', helper: 'clone', zIndex: 100 }); $("div.content.drop-here").droppable({ drop: function(e, ui) { var param = $(ui.draggable).attr('src'); if($.browser.msie && $.browser.version=='6.0') { param = $(ui.draggable).attr('style').match(/src=\"([^\"]+)\"/); param = param[1]; } addlist(param); } }); }); function addlist(param) { $.ajax({ type: "POST", url: "ajax/addtocart.php", data: 'img='+encodeURIComponent(param), dataType: 'json', beforeSend: function(x){$('#ajax-loader').css('visibility','visible');}, success: function(msg){ $('#ajax-loader').css('visibility','hidden'); if(parseInt(msg.status)!=1) { return false; } else { var check=false; var cnt = false; for(var i=0; i<purchased.length;i++) { if(purchased[i].id==msg.id) { check=true; cnt=purchased[i].cnt; break; } } if(!cnt) $('#item-list').append(msg.txt); if(!check) { purchased.push({id:msg.id,cnt:1,price:msg.price}); } else { if(cnt>=3) return false; purchased[i].cnt++; $('#'+msg.id+'_cnt').val(purchased[i].cnt); } totalprice+=msg.price; update_total(); } $('.tooltip').hide(); } }); } function findpos(id) { for(var i=0; i<purchased.length;i++) { if(purchased[i].id==id) return i; } return false; } function remove(id) { var i=findpos(id); totalprice-=purchased[i].price*purchased[i].cnt; purchased[i].cnt = 0; $('#table_'+id).remove(); update_total(); } function change(id) { var i=findpos(id); totalprice+=(parseInt($('#'+id+'_cnt').val())-purchased[i].cnt)*purchased[i].price; purchased[i].cnt=parseInt($('#'+id+'_cnt').val()); update_total(); } function update_total() { if(totalprice) { $('#total').html('total: $'+totalprice); $('a.button').css('display','block'); } else { $('#total').html(''); $('a.button').hide(); } } not sure if this is needed, but it links to the above file; Code: [Select] <?php define('INCLUDE_CHECK',1); require "######.php"; ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>shop</title> <link rel="stylesheet" type="text/css" href="demo.css" /> <script type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></script> <script type="text/javascript" src="jquery.ui.main.js"></script> <!--[if lt IE 7]> <style type="text/css"> .pngfix { behavior: url(pngfix/iepngfix.htc);} .tooltip{width:200px;}; </style> <![endif]--> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.min.js"></script> <script type="text/javascript" src="simpletip/jquery.simpletip-1.3.1.pack.js"></script> <script type="text/javascript" src="script.js"></script> </head> <body> <div id="main-container"> <div class="tutorialzine"> <h1>Shopping cart</h1> <h3>The best products at the best prices</h3> </div> <div class="container"> <span class="top-label"> <span class="label-txt">Products</span> </span> <div class="content-area"> <div class="content drag-desired"> <?php $result = mysql_query("SELECT * FROM internet_shop"); while($row=mysql_fetch_assoc($result)) { echo '<div class="product"><a href="#" class="item"><img src="img/products/'.$row['img'].'" alt="'.htmlspecialchars($row['name']).'" width="128" height="128" class="pngfix" /></a></div>'; } ?> <div class="clear"></div> </div> </div> <div class="bottom-container-border"> </div> </div> <div class="container"> <span class="top-label"> <span class="label-txt">Shopping Cart</span> </span> <div class="content-area"> <div class="content drop-here"> <div id="cart-icon"> <img src="img/Shoppingcart_128x128.png" alt="shopping cart" class="pngfix" width="128" height="128" /> <img src="img/ajax_load_2.gif" alt="loading.." id="ajax-loader" width="16" height="16" /> </div> <form name="checkoutForm" method="post" action="order.php"> <div id="item-list"> </div> </form> <div class="clear"></div> <div id="total"></div> <div class="clear"></div> <a href="" onclick="document.forms.checkoutForm.submit(); return false;" class="button">Checkout</a> </div> </div> <div class="bottom-container-border"> </div> </div> </div> <div class="bowlpic"> </div> </body> </html> Probably a stupid question . . .
The MIME type in my php.ini file is set to text/html:
default_mimetype = "text/html"But, because I use XHTML 1.0 Strict, the MIME type of my web pages is set to text/xml: <meta http-equiv="content-type" content="text/xml; charset=utf-8" />I should therefore change the php.ini MIME type to text/xml, right? Hi i have this upload script which works fine it uploads image to a specified folder and sends the the details to the database. but now i am trying to instead make a modify script which is Update set so i tried to change insert to update but didnt work can someone help me out please this my insert image script which works fine but want to change to modify instead Code: [Select] <?php mysql_connect("localhost", "root", "") or die(mysql_error()) ; mysql_select_db("upload") or die(mysql_error()) ; // my file the name of the input area on the form type is the extension of the file //echo $_FILES["myfile"]["type"]; //myfile is the name of the input area on the form $name = $_FILES["image"] ["name"]; // name of the file $type = $_FILES["image"]["type"]; //type of the file $size = $_FILES["image"]["size"]; //the size of the file $temp = $_FILES["image"]["tmp_name"];//temporary file location when click upload it temporary stores on the computer and gives it a temporary name $error =array(); // this an empty array where you can then call on all of the error messages $allowed_exts = array('jpg', 'jpeg', 'png', 'gif'); // array with the following extension name values $image_type = array('image/jpg', 'image/jpeg', 'image/png', 'image/gif'); // array with the following image type values $location = 'images/'; //location of the file or directory where the file will be stored $appendic_name = "news".$name;//this append the word [news] before the name so the image would be news[nameofimage].gif // substr counts the number of carachters and then you the specify how how many you letters you want to cut off from the beginning of the word example drivers.jpg it would cut off dri, and would display vers.jpg //echo $extension = substr($name, 3); //using both substr and strpos, strpos it will delete anything before the dot in this case it finds the dot on the $name file deletes and + 1 says read after the last letter you delete because you want to display the letters after the dot. if remove the +1 it will display .gif which what we want is just gif $extension = strtolower(substr($name, strpos ($name, '.') +1));//strlower turn the extension non capital in case extension is capital example JPG will strtolower will make jpg // another way of doing is with explode // $image_ext strtolower(end(explode('.',$name))); will explode from where you want in this case from the dot adn end will display from the end after the explode $myfile = $_POST["myfile"]; if (isset($image)) // if you choose a file name do the if bellow { // if extension is not equal to any of the variables in the array $allowed_exts error appears if(in_array($extension, $allowed_exts) === false ) { $error[] = 'Extension not allowed! gif, jpg, jpeg, png only<br />'; // if no errror read next if line } // if file type is not equal to any of the variables in array $image_type error appears if(in_array($type, $image_type) === false) { $error[] = 'Type of file not allowed! only images allowed<br />'; } // if file bigger than the number bellow error message if($size > 2097152) { $error[] = 'File size must be under 2MB!'; } // check if folder exist in the server if(!file_exists ($location)) { $error[] = 'No directory ' . $location. ' on the server Please create a folder ' .$location; } } // if no error found do the move upload function if (empty($error)){ if (move_uploaded_file($temp, $location .$appendic_name)) { // insert data into database first are the field name teh values are the variables you want to insert into those fields appendic is the new name of the image mysql_query("INSERT INTO image (myfile ,image) VALUES ('$myfile', '$appendic_name')") ; exit(); } } else { foreach ($error as $error) { echo $error; } } //echo $type; ?> http://paste.ee/p/OhiWv
The above is a link to a readable version of my code. The XMLHTTPREQUEST worked, and the array was pulled down. Was able to print out the undecoded/unparsed array. However, immediately afterwards, all code stops working.
<script>
var xhr;
if (window.XMLHttpRequest) { // Mozilla, Safari, ...
xhr = new XMLHttpRequest();
} else if (window.ActiveXObject) { // IE 8 and older
xhr = new ActiveXObject("Microsoft.XMLHTTP");
}
xhr.open("POST", "PHPLibrary/selectMemberResults.php", true);
xhr.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
xhr.send();
xhr.onreadystatechange = display_data;
var $phparray
function display_data() {
if (xhr.readyState == 4) {
if (xhr.status == 200) {
//alert(xhr.responseText);
$phparray = xhr.responseText;
document.getElementById("suggestion").innerHTML = $phparray;
//
//
//......................................................?
// The above line of code is the last thing to print or
// to do anything that returns to the browser....
//.......................................................?
// All lines below do nothing............................?
//
} else {
//alert('There was a problem with the request.');
}
}
}
document.write("Length of phparray Array :" + $phparray.length + "<");
var output = JSON.parse($phparray, function (key,val) {
if ( typeof val === 'string' ) {
// regular expression to remove extra white space
if ( val.indexOf('\n') !== -1 ) {
var re = /\s\s+/g;
return val.replace(re, ' ');
} else {
return val;
}
}
return val;
} );
document.write("Length of Array :" + $output.length + "<");
for (var i=0; i < $output.length; i++)
{
document.getElementById("suggestion").innerHTML = $output[i].MEMBER_NAME;
}
</script>
i dont understand what is wrong plz help me.
here is code
$name = "img/".rand(1,9999999).".png";
$myFile = $name;
$fh = fopen($myFile, 'w') or die("can't open file");
$stringData = $html;
fwrite($fh, $stringData);
fclose($fh);
$file=$name;
$fst=file_get_contents($file);
$im=imagecreatefromstring($fst);
imagefilter($im, IMG_FILTER_GRAYSCALE);
imagefilter($im, IMG_FILTER_NEGATE);
//Convert to Grey Scale
for($i=0;$i<123;$i++){
for($j=0;$j<50;$j++){
$px=imagecolorat($im,$i,$j);
if($px<0x303030){
imagesetpixel($im,$i,$j,0);
}else{
imagesetpixel($im,$i,$j,0xffffff);
}
}
}
$database = unserialize(@file_get_contents("db.txt"));
if($database === false) $database = array();
// modify the database if needed
if($_SERVER['REQUEST_METHOD'] == 'POST'){
if($_POST['submit'] == 'Add')
$database[$_POST['ident']] = substr($_POST['letter'], 0, 1);
if($_POST['submit'] == 'Del')
unset($database[$_POST['ident']]);
if($fh = @fopen('db111.txt', 'w+')){
fwrite($fh, serialize($database));
fclose($fh);
}
}else{
$newimage = true;
}
$width = 130;
$height = 40;
$captcha_gridstart =1;
$captcha_gridspace =2;
$letters = findletters($im, $width, $height, $captcha_gridstart, $captcha_gridspace);
$count = count($letters);
$cellw = ($count > 0) ? intval(100 / $count) : 0;
//dispeckle the image and GET co-ordinates of the characters of captcha image and return them.
function findletters($image, $width, $height, $gridstart, $gridspace){
$offsets = array(); $o = 0;
$atstartx = true;
for($x = 0; $x < $width; $x++){
$blankx = true;
for($y = 0; $y < $height; $y++){
if(imagecolorat($image, $x, $y) == 0){
$blankx = false;
break;
}
}
if(!$blankx && $atstartx){
$offsets[$o]['startx'] = $x;
$atstartx = !$atstartx;
}else if($blankx && !$atstartx){
$offsets[$o]['endx'] = $x;
$atstartx = !$atstartx;
$o++;
}
}
$count = $o;
for($o = 0; $o < $count; $o++){
for($y = 0; $y < $height; $y++){
$blanky = true;
for($x = $offsets[$o]['startx']; $x < $offsets[$o]['endx']; $x++){
if(imagecolorat($image, $x, $y) == 0){
$blanky = false;
break;
}
}
if(!$blanky){
$offsets[$o]['starty'] = $y;
break;
}
}
for($y = $height-1; $y > $offsets[$o]['starty']; $y--){
$blanky = true;
for($x = $offsets[$o]['startx']; $x < $offsets[$o]['endx']; $x++){
if(imagecolorat($image, $x, $y) == 0){
$blanky = false;
break;
}
}
if(!$blanky){
$offsets[$o]['endy'] = $y;
break;
}
}
}
for($o = 0; $o < $count; $o++){
$offsets[$o]['ident'] = "";
for($x = $offsets[$o]['startx'] + $gridstart; $x < $offsets[$o]['endx']; $x += $gridspace){
for($y = $offsets[$o]['starty'] + $gridstart; $y < $offsets[$o]['endy']; $y += $gridspace){
$offsets[$o]['ident'] .= ((imagecolorat($image, $x, $y) == 0) ? "0" : "1");
#echo $offsets[$o]['ident'].'<br>';
}
}
}
return $offsets;
}
$a="";
foreach($letters as $letter){
$asciiletter = $database[$letter['ident']];
if(!empty($asciiletter)) {
$a.=$asciiletter;
}
}
Hi all I am having a problem with an error message firing all the time? Code: [Select] if ((($_FILES["file"]["type"] != "application/zip")) || (($_FILES["file"]["type"] != "application/x-zip-compressed")) || (($_FILES["file"]["type"] != "application/x-zip"))) { header('Location: scontrol.php?alert=notzip'); } This is firing when I try uploading a zip, I have 2 questions, have I missed a MIME type (using Chrome) and is a Winrar ZIP different from a standard zip (its not a .rar file!) Thanks hi all new to php and having a sturggle with email.
I have a a form that when completed I wish to auto email the results to a new member simple enough . i also create a image with their unique name and member type and attach this to the email. I can attach the image and send an html email however I wish to send a plain text email along with this.
here lies the problem.
$to = $email ;
$subject = 'some subject';
$bound_text = "010103689954";
$bound = "--".$bound_text."\r\n";
$bound_last = "--".$bound_text."--\r\n";
$headers = "From: <snip email removed>\r\n";
$headers .= "MIME-Version: 1.0\r\n"
."Content-Type: multipart/mixed; boundary=\"$bound_text\"";
$message .= "If you can see this MIME than your client doesn't accept MIME types!\r\n"
.$bound;
/*HTML part of email*/
$message .= "Content-Type: text/html; charset=\"iso-8859-1\"\r\n";
$message .="Content-Transfer-Encoding: 7bit\r\n\r\n";
$message .='<html><b>html version</b></html>\r\n'
.$bound;
/*Plain Text part of email*/
$message .= "Content-Type: text/plain; charset=\"iso-8859-1\"\r\n";
$message .="Plain text version\r\n"
.$bound;
/*Attachment part of the email adds jpeg memebrship card*/
$file = file_get_contents("create_membership_card.php?forename=$Forename&surname=$Surname&membership=$Membership");
$message .= "Content-Type: image/jpg; name=\"YourMembershipCard.jpg\"\r\n"
."Content-Transfer-Encoding: base64\r\n"
."Content-disposition: attachment; file=\"YourMembershipCard.jpg\"\r\n"
."\r\n"
.chunk_split(base64_encode($file))
.$bound_last;
mail($to, $subject, $message, $headers)
This will send email in html and attach image but I can not get it to also send the plain/test version.
example page to enter email and see what is sent http://www.hexhamcan....php?page=Email
Any help with this would be great thanks in advance hope I have provided enough information
Lee ps. great place you have here
Edited by mac_gyver, 29 May 2014 - 07:26 PM. removed email address Is it not possible to get the mime type for a file uploaded using php? Am I going to be forced to use Pear? Php can read the mime type from an image, so why not from any file?? I sent an MIME email to an outlook account using Mail() and the HTML part was placed as an attachment for some reason. I dont get caught by most spam filters (just outlook and my school) but I wanted to get this worked out so I dont get caught by any spam filters. Can someone please take a look at my email system below and let me know if everything looks correct? Just in case you need this; I am using PostFix, Zimbra, running on Debian 6.0 (php5) //add From: header $headers = 'From:' . $from . "\n"; $headers .= 'Reply-To:' . $from . "\n"; $headers .= 'Return-Path:' . $from . "\n"; //specify MIME version 1.0 $headers .= "MIME-Version: 1.0\n"; //unique boundary $boundary = uniqid("market"); //tell e-mail client this e-mail contains//alternate versions $headers .= "Content-Type: multipart/mixed; boundary = $boundary\r\n\r\n"; //plain text version of message $body = "--$boundary\r\n" . "Content-Type: text/plain; charset=ISO-8859-1\r\n" . "Content-Transfer-Encoding: base64\r\n\r\n"; //adds the remove to the string $body .= chunk_split(base64_encode($plaintxt)); //HTML version of message $body .= "--$boundary\r\n" . "Content-Type: text/html; charset=ISO-8859-1\r\n" . "Content-Transfer-Encoding: base64\r\n\r\n"; $body .= chunk_split(base64_encode($htmltxt)); $message = stripcslashes($body); $subject = stripcslashes($subject); mail($to1[$i], $subject, $message, $headers, "-f $from"); Hey guys, Go easy on me, I'm not a large PHP coder at all however here is the issue I am having. I have acquired a wordpress plugin from a guy to deal with ticketing. From this plugin I am sending out a Mime multipart message with both HTML and plain text code. Here's the thing: If I send this out via gmail's SMTP server the message appears perfectly, however if I send it out via pro.turbo-smtp.com it arrives as an attachment due to the fact that in transit it seems to have lost it's Mime-Version: and Content-type: headers such as displayed below: Date: Fri, 19 Dec 2014 16:02:28 +0000 Return-Path: <REMOVEDADDRESS> To: REMOVEDADDRESS From: Name Here <REMOVEDADDRESS> Reply-To: Subject: Booking Confirmation Message-ID: <edc5de8156becec1bf53e402b25c9b93@REMOVED.co.uk> X-Priority: 3 X-Mailer: PHPMailer 5.2.7 (https://github.com/PHPMailer/PHPMailer/) MIME-Version: Content-Type: Content-Transfer-Encoding: 8bit --Part_A_aaa4586399e49459e0dce4368165275f Hey Mr A Sample, Thank you for booking with us.I am more than positive that this is not a PHP issue due to it appearing fine via google's SMTP server, but I am just wondering if anyone has ever came across such a thing and if anyone can shed any light? If anyone wants the PHP code I'm sure I can supply. Many thanks in advance!, Chris I have a scenario where users are downloading files from a legacy system and uploading the files into a new system that I am supporting. Many of the files do not have an extension (most are tiffs).
The issue we have is that the new system doesn't know how to open these files (we have them open in a preview window in the new system). I have tried numerous solutions, including finfo_file() and the depreciated mime_content_type() funcitons), but all they seem to return is "application/octet-stream".
Thanks.
I recently changed something in an old script of mine and it doesn't work properly anymore. I don't know what I did, and I don't have a backup, oops! The code below is supposed to take inputs from a web form and turn them into an e-postcard, attaching and sending it as a jpeg on an email, ideally to be displayed inline. $name = $_POST['sendername']; $to = $_POST['recipient']; $from = $_POST['senderemail']; $subject = basename( $name)." has sent you a jCard!"; $message = $_POST['text']; $bcc = $_POST['bcc']; $finalimage = $_POST['finalimage']; //create a boundary string. It must be unique //so we use the MD5 algorithm to generate a random hash $random_hash = md5(date('r', time())); //define the headers we want passed. Note that they are separated with rn $headers = "From: ".$name." <".$from.">\r\nReply-To: ".$name." <".$from.">\r\nBcc: ".$bcc."\r\nX-Mailer: PHP/".phpversion();""; //add boundary string and mime type specification $headers .= "\r\nContent-Type: multipart/mixed; boundary='PHP-mixed-".$random_hash."'"; //read the attachment file contents into a string, //encode it with MIME base64, //and split it into smaller chunks $attachment = chunk_split(base64_encode(file_get_contents($finalimage))); //define the body of the message. ob_start(); //Turn on output buffering ?> --PHP-mixed-<?php echo $random_hash; ?> Content-Type: multipart/alternative; boundary='PHP-alt-<?php echo $random_hash; ?>' --PHP-alt-<?php echo $random_hash; ?> Content-Type: text/plain; charset='iso-8859-1'; Content-Transfer-Encoding: 7bit <?php echo $name; ?> sent you a jCard, click the attachment to view it. Send your own jCards at www.j-cards.co.uk! --PHP-alt-<?php echo $random_hash; ?> Content-Type: text/html; charset='iso-8859-1'; Content-Transfer-Encoding: 7bit <p><?php echo $name; ?> sent you this jCard:</p> <img src="cid:<?php echo $random_hash; ?>.jCard.jpg" /> <p>Send your own jCards at <a href="http://www.j-cards.co.uk">j-cards.co.uk</a>!</p> --PHP-alt-<?php echo $random_hash; ?>-- --PHP-mixed-<?php echo $random_hash; ?> Content-Type: image/jpeg; name='jCard.jpg' Content-Transfer-Encoding: base64 Content-ID: <<?php echo $random_hash; ?>.jCard.jpg> Content-Disposition: attachment; filename='/jCard.jpg' <?php echo $attachment; ?> --PHP-mixed-<?php echo $random_hash; ?>-- <?php //copy current buffer contents into $message variable and delete current output buffer $message = ob_get_clean(); //send the email $mail_sent = @mail( $to, $subject, $message, $headers ); //if the message is sent successfully return success page html. Otherwise return send fail html. echo $mail_sent ? "<html> snip... The email gets sent, and the source of the email looks identical to that of previous correctly displayed versions, but for some reason the email reader no longer renders the html, instead it just shows plain text, so it looks like the source just without headers - e.g.: Quote From: whoever@wherever.com To: friend@bestfriend.com --PHP-mixed-643f51499c414383c5735473100462e4 Content-Type: multipart/alternative; boundary='PHP-alt-643f51499c414383c5735473100462e4' --PHP-alt-643f51499c414383c5735473100462e4 Content-Type: text/plain; charset='iso-8859-1'; Content-Transfer-Encoding: 7bit Joe sent you a jCard, click the attachment to view it. Send your own jCards at www.j-cards.co.uk! --PHP-alt-643f51499c414383c5735473100462e4 Content-Type: text/html; charset='iso-8859-1'; Content-Transfer-Encoding: 7bit <p>Joe sent you this jCard:</p> <img src="cid:643f51499c414383c5735473100462e4.jCard.jpg" /> <p>Send your own jCards at <a href="http://www.j-cards.co.uk">j-cards.co.uk</a>!</p> --PHP-alt-643f51499c414383c5735473100462e4-- --PHP-mixed-643f51499c414383c5735473100462e4 Content-Type: image/jpeg; name='jCard.jpg' Content-Transfer-Encoding: base64 Content-ID: <643f51499c414383c5735473100462e4.jCard.jpg> Content-Disposition: attachment; filename='/jCard.jpg' /9j/4AAQSkZJRgABAQA... (base64 characters - very long - snipped) --PHP-mixed-643f51499c414383c5735473100462e4-- So everything is being sent, it's just an issue of getting it read correctly by the email program (worked before in gmail and hotmail). So I think it's an issue with the headers or boundary string I'm using, but they look alright to me, I just can't see what I've done wrong. Any ideas? Hello, i have an upload form witch i cannot upload pdf it does not recognize the mine pdf type, any help please. here is the code $target_path = $_SERVER['DOCUMENT_ROOT'] . '/admin/upload/'; $target = "upload/".$HTTP_POST_FILES['uploadedfile']['name']; $target_path = $target_path . basename( $_FILES['uploadedfile']['name']); $fileSize = $_FILES['uploadedfile']['size']; $fileType = $_FILES['uploadedfile']['type']; if ($_FILES['uploadedfile']['size'] > 0) { if (($_FILES["uploadedfile"]["type"] == "image/gif") || ($_FILES["uploadedfile"]["type"] == "image/jpeg") || ($_FILES["uploadedfile"]["type"] == "image/png" ) || ($_FILES["uploadedfile"]["type"] == "application/msword" ) || ($_FILES["uploadedfile"]["type"] == "application/pdf" ) && ($_FILES["uploadedfile"]["size"] < 512000)) { move_uploaded_file($_FILES['uploadedfile']['tmp_name'], $target_path); $query_upload="INSERT INTO upload (upload, chair, id_domeniu, email_1) VALUES ('" . $target . $_FILES['uploadedfile']['name'] . "', '3', '$id_domeniu', '".$_GET['email_1']."')"; $query_upload="UPDATE domenii SET upload='" . $target . $_FILES['uploadedfile']['name'] . "' WHERE email_1='".$email_1."'"; mysql_query($query_upload) or die(mysql_error()); } else { echo "<script language='javascript'>alert('Programul uploadat trebuie sa fie PDF, DOC, JPEG si mai mic de 500 kilobytes.');window.location = 'javascript:history.go(-1)';</script >"; exit(); } } |
|||||||