PHP - For Loop Through An Array Starting From A Later Index

Hi-
I did this and it works... based on the date, the values in the array (from 1 to 9) are echoed by calling $num.

Code: [Select]
<?php
$start = "2012-02-27";
$now = date("Y-m-d"); 

$week2 = strtotime(date("Y-m-d", strtotime($start)) . " +1 week"); $week2_st = date("Y-m-d", $week2);
$week3 = strtotime(date("Y-m-d", strtotime($start)) . " +2 weeks"); $week3_st = date("Y-m-d", $week3);
$week4 = strtotime(date("Y-m-d", strtotime($start)) . " +3 weeks"); $week4_st = date("Y-m-d", $week4);
$week5 = strtotime(date("Y-m-d", strtotime($start)) . " +4 weeks"); $week5_st = date("Y-m-d", $week5);
$week6 = strtotime(date("Y-m-d", strtotime($start)) . " +5 weeks"); $week6_st = date("Y-m-d", $week6);
$week7 = strtotime(date("Y-m-d", strtotime($start)) . " +6 weeks"); $week7_st = date("Y-m-d", $week7);
$week8 = strtotime(date("Y-m-d", strtotime($start)) . " +7 weeks"); $week8_st = date("Y-m-d", $week8);
$week9 = strtotime(date("Y-m-d", strtotime($start)) . " +8 weeks"); $week9_st = date("Y-m-d", $week9);

$var_name  = array('1', '2','3','4,'5','6','7,'8','9');  

if ($now <= $week2_st){ $num = $var_name[0];} 
elseif($now >= $week2_st && $now <= $week3_st){ $num = $var_name[1];}
elseif($now >= $week3_st && $now <= $week4_st){ $num = $var_name[2];}
elseif($now >= $week4_st && $now <= $week5_st){ $num = $var_name[3];}
elseif($now >= $week5_st && $now <= $week6_st){ $num = $var_name[4];}
elseif($now >= $week6_st && $now <= $week7_st){ $num = $var_name[5];}
elseif($now >= $week7_st && $now <= $week8_st){ $num = $var_name[6];}
elseif($now >= $week8_st && $now <= $week9_st){ $num = $var_name[7];}
elseif($now >= $week9_st){ $num = $var_name[8];}
else{ $num :'( = $var_name[0];}
?>

I'm trying to do a for loop so the index # increments by one and i only call $r instead $var_name[0], $var_name[1], $var_name[2], and so one. Any ideas?
Code: [Select]
$count = count($var_name);
for ($i = 0; $i < $count; $i++)
    {
        $r = $var_name[$i];
    }

Good morning!

I have a two dimensional array, basically a table (see code below). I want to get a value from the array using two methods:
1) Using the row's key:  $NewValue = $MyArray[$UniqueKey];
2) Using the row's index (row number, so to speak): $NewValue = $MyArray[$RowNumber];

The second print statement in the code below does not work. Both print statements should output the same value. Is there an easy way to do this? The table has hundreds of rows and I will not know the key value of row 879 nor can I generate it. So I cannot use array_keys(). And I DO NOT want to start at the first row and count up to the 879th row.

Any clever ideas to share and enlighten?
Thanks!

<?php
// Initialize the array keys and values
$MyArray = array();
$MyArray['first']['col1'] = 'abc'; $MyArray['first']['col2'] = 'def'; $MyArray['first']['col3'] = 'ghi';
$MyArray['second']['col1'] = 'jkl'; $MyArray['second']['col2'] = 'mno'; $MyArray['second']['col3'] = 'pqr';
$MyArray['third']['col1'] = 'stu'; $MyArray['third']['col2'] = 'vwx'; $MyArray['third']['col3'] = 'yz';
$MyArray['fourth']['col1'] = 'a1a'; $MyArray['fourth']['col2'] = 'b2b'; $MyArray['fourth']['col3'] = 'c3c';
$MyArray['fifth']['col1'] = 'ddd'; $MyArray['fifth']['col2'] = 'eee'; $MyArray['fifth']['col3'] = 'fff';
// Two methods to get a value. Second one does nothing.
print"{$MyArray['third']['col2']}</br>";
print"{$MyArray[2]['col2']}</br>";
?>

I have this code
Code: [Select]
$nArr = array('A', 'B', 'C', 'D', 'E', 'F');

$counter = 3;
while ($counter > 0) {
    $chunkedValues[$counter][0] = 1;
    for ($j = 0 ; $j < $counter ; $j++) {
        $chunkedValues[$counter][$j + 1] = $nArr[$j];
    }
    $nArr = array_slice($nArr, $counter--);
}
var_dump($chunkedValues);
that outputs:
Code: [Select]
array
  3 =>
    array
      0 => int 1
      1 => string 'A' (length=1)
      2 => string 'B' (length=1)
      3 => string 'C' (length=1)
  2 =>
    array
      0 => int 1
      1 => string 'D' (length=1)
      2 => string 'E' (length=1)
  1 =>
    array
      0 => int 1
      1 => string 'F' (length=1)
But i need this index structu
Code: [Select]
array
  0 =>
    array
      0 => int 1
      1 => string 'A' (length=1)
      2 => string 'B' (length=1)
      3 => string 'C' (length=1)
  1 =>
    array
      1 => int 1
      2 => string 'D' (length=1)
      3 => string 'E' (length=1)
  2 =>
    array
      2 => int 1
      3 => string 'F' (length=1)
I want to avoid loops with ceil.

Any idea? thanks for your time.

I have been researching php.net  regain the function parse_ini_file()

I know you can pass it an actual ini file but what if you already saved the ini file as a string and saved the string in a variable can you pass that variable to the function?

I am getting the following error Code: [Select]
[function.parse-ini-file]: failed to open stream: No such file or directory in
this is how I am calling it.

Code: [Select]
$settings = parse_ini_file($data);

echo $settings["mac"];

<?

$array = array('eggs', 'bacon', 'football', 'baseball', 'ford', 'toyota'); 

$rand_index = mt_rand(0, count($array) / 2 - 1) * 2; 
?>



<?php echo "$array[$rand_index]"; ?><?php echo "$array[$rand_index+1]"; ?>

i dunno why this doesn't work. I want to echo both values three of the pairs such as eggs bacon  or football baseball

I have this code working fine (thanks to Thorpe).  FYI, this code is getting info for each day and putting that info into the array and then later on a calendar is generated and the data gathered here is placed onto each specific day.  This is working EXCEPT when there are MULTIPLE data sets on the SAME day.  In those cases, it's just displaying the first data set.

In other words, if $hunches['day'] = 3 and there is just one data set with that date, it will display that info on the calendar fine. But if there are five data sets with $hunches['day'] = 3, then it only displays the first one.

I need it to display all data sets, so any clue how I could alter this code to do that?


Code: [Select]
$sql = "SELECT  *, DATE_FORMAT(`dob`, '%e') AS day FROM hunches
WHERE poolid = '{$_GET['poolid']}'
AND  (DATE_FORMAT(`dob`,'%m')) = " . $month1 . "
ORDER BY day";
$gethunches = mysql_query($sql, $connection);
if (!$gethunches) {
die("Database query failed: " . mysql_error());
} else {

while ($hunches = mysql_fetch_array($gethunches)) {         
    $days1[$hunches['day']] = array(NULL,NULL,'<span class="red">' . $hunches['firstname'] . '</span>');
}
}

Here is a further explanation...
Say $hunches['day'] = 5 and there are four data sets for that day (with respective firstnames of Bob, Joe, Jim and Tony).  I would essentially need this to happen in the code...
Code: [Select]
$days1[$hunches['day']/*which would be 5 in this example*/] = array(NULL,NULL,'<span class="red">' . $hunches['firstname'] . '</span><br>
<span class="red">' . $hunches['firstname'] . '</span><br>
<span class="red">' . $hunches['firstname'] . '</span><br>
<span class="red">' . $hunches['firstname'] . '</span>');

And that would then output...

Bob
Joe
Jim
Tony

...in the 5th day box on the calendar.  Right now, I'm just getting...

Bob

I fear this is very complicated to do but holding out hope that there is some relatively easy way to make this work.

I have an associative array that is serialized and stored in a MySQL DB. 
The array is a duty roster for my son's Cub Scout camping trip (adult volunteers for specific jobs).

When a user clicks a spot on the jQuery/client side, it sends it to my php page via ajax, which should pull up the array from the DB, unserialize it, replace the value "Available" with the person's name for the date/time/job that they clicked on.

For ease of processing, I need to reference the value to replace by numerical indexes rather than the associative key string-type name, but when I try it, it just says Undefined offset.

I thought I could access key/values using the numerical index in square brackets, just as I could if it were a non-associative array.  What gives? (You can see near the end where I tried to access the array by index; this now-commented out line just tacked it on at the end, like it was recognizing the digits as strings instead of integers.  I've tried to cast the values as integers before putting them in brackets, but same effect.

Code: [Select]
//  get the duty roster array from the database
$query = "select dutyroster from ".$eventsTable." where eventID = 1";
$result = mysql_query($query);
if(!$result)
{
}
else
{
//put the returned result into a usable array
$returnedRows = mysql_fetch_array($result,MYSQL_BOTH);
$unserializedArray = unserialize($returnedRows[0]);
}


//get the returned values for ID, email, and fillerValue
$ID = "0-0-2-2";//$_POST['ID'];
$email = "blank@blank.com";//$_POST['email'];
$fillerValue = "Dude (test)";//$_POST['fillerValue'];

// parse $ID to break out the array index & set them as variables
$explodedArray = explode("-",$ID);
$iDate = (int)$explodedArray[0];
$iTimeblock = (int)$explodedArray[1];
$iJob = (int)$explodedArray[2];
$iSlot = (int)$explodedArray[3];

echo "<br/> the values a   idate: ".$iDate." and iTimeblock: ".$iTimeblock." and iJob: ".$iJob." and iSlot: ".$iSlot."</br>";
echo "<BR/>  the random selected value to display is: ".$unserializedArray[0];

//$unserializedArray[$iDate][$iTimeblock][$iJob][$iSlot] = $fillerValue;

print_r($unserializedArray);

I'm using the code below to on echo certain words based on their index/key value, this works fine however, im trying to only do this in exploded quotes... the problem is, exploding quotes turns the portion into an array which cant be passed to str_word_count... how can i do the same thing only inside quotes. So that  hello world "this is a test" would become: Code: [Select]
Hello World This [0] => Is [1] => a [2] => Test [3] 

Im trying to always remove say the 4th word in quotations, or maybe the 3rd and 4th, whatever i want to omit i leave out from the echo, so echo $data[0].' '.$data[3].'; would output "This Test" omitting "Is A"

Code: [Select]
$data = 'hello world "this is a test"';
$data = str_word_count($data, 1);
echo $data[1].' '.$data[2].' '.$data[0];

I am just trying to use Associate array in another php file through session. file1.php

<?php
$age = array();
$_SESSION["age"] = array("Peter"=>"35", "Ben"=>"37", "Joe"=>"43");
foreach($_SESSION["age"] as $x => $x_value) {
echo "Key=" . $x . ", Value=" . $x_value;
echo "<br>\n";
}
?> OUTPUT: Key=Peter, Value=35
Key=Ben, Value=37
Key=Joe, Value=43 file2.php <?php
session_start();
foreach( $_SESSION["age"] as $x => $x_value) {
echo "Key=" . $x . ", Value=" . $x_value;
echo "<br>\n";
}
?> OUTPUT: PHP Notice: Undefined index: age in session.php on line 3 PHP Warning: Invalid argument supplied for foreach() in session.php on line 3   Why am I getting this error?   Above is just example I tried to demonstrate for asking question for other issue, unfortunately I got new error in this example. But actual issue was, I was trying to plot graph  using library which requires only Associate array, where the data is formed in file1.php. But I get only last index value displayed in file2.php even in graph or in echo. I don't understand why other values are not displayed in file2.php Please point me what is going wrong, Thanks.

Here is my function which almost works as expected:


<?php
function find_value($array,$value)
{
for($i=1;$i<sizeof($array);$i++)
{
if($array[$i] == $value)
{
echo "$i . $array[$i]<br />";
return;
}
}
}
?>


And I call the function like so:


<?php
$names = array('Jason','Mike','Joe');
$name = 'Joe';

find_value($names,$name);
?>


And the output is:

2 . Joe

According to my understanding of Arrays, Joe would be index 3 BECAUSE my counter starts at 1 in my for loop??? Why is the result like this? What am I not understanding here?

hi very good, hi very good, I have a label on a form select and I get that value with $ _POST like this: $ _POST like this:
$ gallery = array ($ _POST ['gallery']);
and that value will put it he
$ image = $ sitemap-> gallery [$ gallery] -> addChild ('image');
the problem is giving me error is as follows:
Fatal error: Call to a member function addChild () on a non-object in
I do not understand is that if I put a value directly asin me do it like so:
 $ gallery = 0;
$ Image = $ sitemap-> gallery [$ gallery] -> addChild ('image');
I do well, what happens is that I want the user to choose,
Kind of strange as it may fix.

I wish to return the object in an array with the highest index where its index falls between between integers, and return null should one not exist.

For instance, with the following and a min and max of 10,000 and 15,000, it should return OBJ4, and with a min and max of 15,000 and 20,000 it should return NULL.

Any thoughts?  Thanks

function getObj(int $min, int $max):?OBJ {
    $list=[
        12314=>'OBJ1',
        321=>'OBJ2',
        42142=>'OBJ3',
        14314=>'OBJ4',
        123=>'OBJ5',
        13314=>'OBJ6'
    ];
    return getIt($list, $min, $max);
}

 

I am working with wordpress. I am using a plugin that gets options stored in an array in the database. This is how I get the options

Code: [Select]
$options = get_option('option_tree');
echo $options['exc_cat'];

the exc_cat is a key that stores a set of values. Right now with the code above, it echoes Array. If I do this

Code: [Select]
echo $options['exc_cat'][0];

it returns 5. Which is what I would expect it to do. What I can't figure out is how to get it to store each value which should be a number into 1 variable. What I need to do is loop through each value that is stored in the exc_cat key, return the number seperated by a -1,. So the result should look like this


-1, -5

1 and 5 should be the only two numbers stored in the array at this point. Can you help?

Thanks

i have 2 arrays... first array of lastnames, second array of firstnames

lastAry = array('smith', 'jones', 'reed', 'chan')
firstAry = array('mary', 'chris', 'kim', joe', 'sara', 'tim', 'amy', 'fred')

how do i loop through each lastnames and turn into a string with firstname so it looks like :

smith | mary | chris
jones | kim | joe
reed | sara | tim
chan | amy | fred

i have an array in the loop but it isn't building up with results.  i want it to check if the array exists, if not then create the array. Then in next loop it pushes a new value into the array.  Below isn't working?...

Code: [Select]

while($row=mysql_fetch_assoc($get));
{
$key = $row['keyword'];

$scope= $_SESSION['scope'];


if (!is_array($scope)) {

$scopenew = array($key);
$_SESSION['scope'] = $scopenew;

                } else {

$scopenew = array_push($scope, $key);
$_SESSION['scope'] = $scopenew;

}


}