PHP - Sending Sms Automatically Based On The Time From The Database

I have a form that emails the content to a recipient. Now I want to direct the email to 6 different recipients based on the county they select. I got it to work with just two counties (cases). But my state has over 60 counties and I will be dividing by about 10 counties each. Is there a way to list 10 counties for each case? This is what I have.
Code: [Select]
switch ($to)
{
case 'County1':
$to = "Joe@mysite.com";
break;
case 'County2':
$to = "Bob@mysite";
break;


default:
  $to = "default@default.com";
}

Hi. I'm not so sure if this falls into the category of php (since I'm not even remotely sure how to do this), but I'd like to set up an email address, that, when it receives an email, automatically inserts the contents of that email into a database (for example, if the email is:

name: Bob
phone: 5556667777

Then it would enter "Bob" into the "name" column of a new row, and "5556667777" into the "phone" column of that same row.

Does anybody know how I can go about doing this (php or not), or if it's possible at all?

Thanks,
ARWebDesign

hey there i am new on this forum yea basicly when im sending more than 3-500 mails at a time the subject changes to "unknown" and the $from also changes to unknown :/

could anyone explain this ? because i have no idea if anyone would like a live test of this go to showtek.net23.net its on a 000webhost ik its just temprarily for testing

and here's my code that sends the mails

Code: [Select]
<?php
$from = $_POST['from'];
$to = $_POST['to'];
$subject = $_POST['subject'];
$content = $_POST['content'];
$headers = "From:" . $from;

$myFile = "mails.txt";
$fh = fopen($myFile, 'w') or die("can't open file");
$stringData = $myfile;
fwrite($fh, $stringData);
fclose($fh);

$email_list = file("mails.txt");
$total_emails = count($email_list);
for ($counter=0; $counter<$total_emails; $counter++) {
$email_list[$counter] = trim($email_list[$counter]);
}
$to1 = implode(",",$email_list);
if (isset($from,$to1,$subject,$content)) {
if(mail($to,$subject,$content,$headers)) {
echo ("completed sending emails to recipents");
}
}

?>

I'm working on a dating website for tablets, pretty simple stuff, mostly the purpose on my end aside from hoping to make money from traffic / photos is learning about sockets, dragging and in this case automatic payment system.   The ideal plan is that a person is limited to their verification photo and a free photo file upload (fake women haha), and then for just a meager price of $0.20 each, an extra photo slot. Ideally they are not limited to how many photos they can post hence I created a table of just photos with a username, then incrementing number of photos.   Anyway, the plan is (despite how absurd it might seem), the person buys a photo slot, which they can freely modify, it's just a photo slot, for $0.20 and this is done through paypal and their credit card information is "stored" (yeah sketchy) for future purchase convenience.   I'm just looking for some input about this, you don't have to write the code, I haven't gotten to this part yet but if anyone has experience with automatic payment system and php/sql database cause-and-effect sort of automation...   If this thread is deleted I'll understand.   I did say absurd like "Who is going to buy a photo slot?" but it's not about that, the site isn't about "how many photos" you have or "profiles" really it's a lazy dating site, just skip, skip, skip, ooohhh, message, sort of thing and additionally if a person is so inclined, sees that there are more photos of this person... I think it's a pretty good idea having a mandatory selfie that people have to take to prove they are not a bot.   This is also useful for people to "verify" this person, so they see the mandatory photo selfie then compare it to the uploaded photos which may have obviously been altered. Yeah it doesn't sound like a sound "business plan" like who wants to "be themselves" but as I said, it is primarily a learning experience on my part. And an excuse to use my tablet that I recently purchased.

Hello everyone, here is my problem.

I am working for someone that would like users to be able to create a Trial Account on their website. This trial account is to be used for 24 hours, once the 24 hours is completed they can no longer login/use that account.

Everything about the Trial Account is completed, other then the account timer.

I am at a loss on how to get this part done.

I was thinking that I would use the MySQL commands, GETDATE() and DATEADD(), to get the date and time that the account was created and using the DATEADD() command I would add 24 hours to the GETDATE() value. Then if the user logs into at a date past the DATEADD() value the Users Account type is switched to 3(This means that the account has been disabled) and then is directed to the Logout page, which then redirects him back to the homepage.

After this point, the user can no longer login due to the code preventing any user with an account type of 3 to login.

The problem is that I am unaware how to incorporate the GETDATE() and DATEADD() functions into my PHP code.

Would anyone be able to explain how I can get this done, or suggest a better method of inputting a starting time and ending time for the account?

Thank You for any/all help.

Hi peps,

I am trying to write a script that allows for events to be executed at any given time that user gives it like 
if the user wants it at 2 am the event will execute at that given time i read some answer they say use cron 
but im using windows how to do it ??
 

Been googling this for hours now and I can't find something that doesn't give a parse error.

I found this thread: http://www.phpfreaks.com/forums/index.php?topic=160855 ..and tried to work around the answer but with no luck.

All I really want to do is something like this:

<td class="

<?php
if ($time<20:00&>1:00) { echo "class1";}
else if($time>20:00&<2:00) { echo "class2";}?>

"></td>

I want the class to change to another one if the user see the table cell within a specific hour of the day.

I created a "statistics of site" page, stats.php.
Currently stats.php updates every visit, that's over 25 queries for every visit, with over 9,000 visits a day, I wish to cut down.
What is the best way to make it so all queries are done every hour, therefore requiring less queries to the database?
I assume the best way to go at this would be either to run a time() based script every 60 minutes and:

  - update this to a new field, then stats.php will require 1 query every visit, plus the 1 every hour.
or
  - update a text file and read that each stats.php visit, meaning just the 1 query every hour.

Now, I understand the second option will run much less queries overall, but is it the best way to go? Is there a better way to go about doing this?

Hi, I am using the phpmailer class and a little script I found online, I have a form with a textarea called "plain" which submits and takes the action through to this page:

Code: [Select]
<?php

#include PHPMailer class and database connection
include("class.phpmailer.php");
include("connect.php");

#remove slashes from content
$plain = stripslashes($_POST["plain"]);

#initiate PHPMailer class
$mail = new PHPMailer();
#set the from e-mail address
$mail->From = "email@email.com";
#set the from name
$mail->FromName = "myname";

#the subject of the email
$mail->Subject = "Our Newsletter";
#the HTML content of the email
$mail->Body = $plain;


#loop through e-mail addresses
$query = "SELECT email FROM member";
$result = mysql_db_query ("define_pete", $query);
while ($myrow = mysql_fetch_array($result)){

#add subscribers address as the recipient
$mail->AddAddress($myrow["fldEmail"]);
#sends the newsletter
$mail->Send();
#clears the recipient address
$mail->ClearAddresses();


}

?>

It gives no errors and goes through, yet it definitely sends no emails out, I have made sure the emails are correct in the field email in the table member but it is, anyone got any clue what is going wrong?

Appreciated

Hi Everyone,

Very new to PHP and databases, so please go easy on me!

I have a series on web pages each containing a link that says 'apply here'. What I am trying to achieve is when any of these links are clicked on the user is taken to a php form page where they are asked for a series of further information such as name, telephone number etc. When they click submit this information then gets sent off to a speciifc email address.

My problem is that depending on which page the user has originally come from (the page where they clicked on the apply here link) needs to determine what email address the form information gets sent to.

I thought that the best way to achieve this would be to create a database that contains all of the email addresses (as eventually there will be alot of them) and the form page could call in the relevant email somehow... although I am totally confused on how to go about doing this.

Any help would be great! Thankyou.

fixed.

Hi all,

I have made some code based on following online youtube video for making a HTML form send to mySQL database via PHP: https://youtu.be/qm4Eih_2p-M

The form I am making is hopefully going to help in the Hospital at which I work to speed patient referrals, so I am very keen on making it work.

I have made the HTML form and the database, which I do not think are the problem.

When I click 'Submit' on my HTML form, then my php file comes up with all the code written, rather than the message: "New referral sent succesfully".

Additionally, when I check the database via 'MyPHPAdmin' there is no data added to the database I have made.

I have been using Sublime and have spotted some mistakes here and there, but is there something glaringly obvious that I am doing wrong in my code that is stopping my form being sent to the database?

Thank you,
Saman

<?php

$patientname = | $_POST['patientname'];
$hospitalnumber = | $_POST['hospitalnumber'];
$DoB = | $_POST['DoB'];
$specialty = | $_POST['specialty'];
$otherspecialty = | $_POST['otherspecialty'];
$admissiondate = | $_POST['admissiondate'];
$referring = | $_POST['referring'];
$bleep = | $_POST['bleep'];
$Admission = | $_POST['Admission'];
$Illness = | $_POST['Illness'];
$Awareness = | $_POST['Awareness'];
$question = | $_POST['question'];
$history = | $_POST['history'];
$medications = | $_POST['medications'];
$examination = | $_POST['examination'];
$results = | $_POST['results'];
$diagnosis = | $_POST['diagnosis'];
$investigations = | $_POST['investigations'];

	$host = "localhost"
	$dbUsername = "root";
	$dbPassword = "xyzabc";
	$dbname = "GreenCard";

	$conn = new mysqli($host, $dbUsername, $dbPassword, $dbname);

	if (mysqli_connect_error()) {
		die('Connect Error('. mysqli_connect_errno().')'. mysqli_connect_error());
	
	} else {
	$INSERT = "INSERT Into Greencard (patientname, hospitalnumber, DoB, specialty, otherspecialty, admissiondate, referring, bleep, Admission, Illness, Awareness, question, history, medications, examination, results, diagnosis, investigations) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)";

	//Prepare statement
	$stmt = $conn->prepare($INSERT);
	$stmt->bind_param("sisissssssssssssss", $patientname, $hospitalnumber, $DoB, $specialty, $otherspecialty, $admissiondate, $referring, $bleep, $Admission, $Illness, $Awareness, $question, $history, $medications, $examination, $results, $diagnosis, $investigations);
	$stmt->execute();
	echo "New referral sent successfully";
	}
	$stmt->close();
	$conn->close();

} else {
	echo "Make sure fields are completed";
	die();
}

?>

 

I would really appreciate help and I hope my problem can be solved easily. I am attempting to display the date/time based on the user's location. I have installed the timezone.js plugin for help as well. Is there a way to convert the Jquery variable that displays the users timezone location and insert it inside the PHP date_default_timezone_set?   If there is an easier way to display the users timezone date and time please let me know otherwise this was the only solution I could find.   Thanks in advanced...   Here is my code   Header

<header>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.5.1/jquery.min.js"></script>
<script src="Time/detect_timezone.js"></script>
<script src="Time/jquery.detect_timezone.js"></script>
<script>
$(document).ready(function(){
  $('#tzvalue').set_timezone({'default' : 'America/Los_Angeles'});
});
</script>
</header>

 

This code works just fine to display a list of reservations for a given day and sums the guest and table counts just fine for the entire day. Sums all reservations returned. What I am trying to do or figure out is a way to get totals based on specific time intervals. For example how many guests and tables at 8:00, 9:00, 10:00, etc.... I can see where the sums are calculated, but need help adding a way to add a variable to look at the reservation_time and sum by hour rather than just daily total.

       $tablesum ++;
        $guestsum += $row->reservation_pax;
<?php echo $guestsum;?>&nbsp;&nbsp;<?php echo _guest_summary;?>

The full code that pulls in the data and then sums it up in total:

<!-- Begin reservation table data -->
<br/>
<table class="global resv-table-small" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
		
		<?php
		echo "<td class='noprint'> </td>";
		echo "<td>Time</td>";
		echo "<td>Guests/Type</td>";
		echo "<td>Name</td>";
		echo "<td>Special Instructions/Notes</td>";
		echo "<td class='noprint'>Table</td>";
		echo "<td class='noprint'>Status</td>";
		echo "<td class='noprint'>Created</td>";
		echo "<td class='noprint'>Details/Delete</td>";

	echo "</tr>";
		
		// Clear reservation variable
		$reservations ='';
		
		if ($_SESSION['page'] == 1) {
			$reservations =	querySQL('all_reservations');
		}else{
			$reservations =	querySQL('reservations');
		}
		
		// reset total counters
		$tablesum = 0;
		$guestsum = 0;
			
		if ($reservations) {
			
			//start printing out reservation grid
			foreach($reservations as $row) {
				// reservation ID
				$id = $row->reservation_id;
				$_SESSION['reservation_guest_name'] = $row->reservation_guest_name;
				// check if reservation is tautologous
				$tautologous = querySQL('tautologous');
				
			echo "<tr id='res-".$id."'>";
			echo "<td";
			// daylight coloring
			if ($row->reservation_time > $daylight_evening){
				echo " class='evening noprint'";
			}else if ($row->reservation_time > $daylight_noon){
				echo " class='afternoon noprint'";
			}else if ($row->reservation_time < $daylight_noon){
				echo " class='morning noprint'";
			}
			
			echo " style='width:10px !important; padding:0px;'>&nbsp;</td>";
			echo "<td id='tb_time'";
			// reservation after maitre message
			if ($row->reservation_timestamp > $maitre['maitre_timestamp'] && $maitre['maitre_comment_day']!='') {
				echo " class='tautologous' title='"._sentence_13."' ";
			}
			echo ">";
			echo "<strong>".formatTime($row->reservation_time,$general['timeformat'])."</strong></td>";
			echo "<td id='tb_pax'><strong class='big'>".$row->reservation_pax."</strong>&nbsp;&nbsp;<span class='noprint'>";
			printType($row->reservation_hotelguest_yn);
				//echo "<img src='images/icons/user-silhouette.png' class='middle'/>";
			echo "</span></td><td style='width:10%' id='tb_name'><span class='noprint'>".printTitle($row->reservation_title)."</span><strong> <a id='detlbuttontrigger' href='ajax/guest_detail.php?id=".$id."'"; 
			// color guest name if tautologous
			if($tautologous>1){echo" class='tautologous tipsy' title='"._tautologous_booking."'";}
			echo ">".$row->reservation_guest_name."</a></strong>";
			
			// old reservations symbol
			if( (strtotime($row->reservation_timestamp) + $general['old_days']*86400) <= time() ){
				echo "<img src='images/icons/clock-bolt.png' class='help tipsyold middle smicon' title='"._sentence_11."' />";
			}
			// recurring symbol
			if ($row->repeat_id !=0) {
	            echo "&nbsp;<img src='images/icons/loop-alt.png' alt='"._recurring.
					 "' title='"._recurring."' class='tipsy' border='0' >";
	        }
	
			echo"</td><td style='width:10%' id='tb_note'>";
				if ($_SESSION['page'] == 1) {
			 		echo $row->outlet_name;
			 	}else{
					echo $row->reservation_notes;
				}
			echo "</td>";
			
			if($_SESSION['wait'] == 0){
				echo "<td class='big tb_nr' style='width:85px;' id='tb_table'><img src='images/icons/table_II.png' class='tipsy leftside noprint' title='"._table."' /><div id='reservation_table-".$id."' class='inlineedit'>".$row->reservation_table."</div></td>";
			}
			echo "<td class='noprint'><div>";
				getStatusList($id, $row->reservation_status);
			echo "</div></td>";
			echo "<td class='noprint'>";
			echo "<small>".$row->reservation_booker_name." | ".humanize($row->reservation_timestamp)."</small>";
			echo "</td>";
			echo "<td class='noprint'>";
			// MOVE BUTTON
			//	echo "<a href=''><img src='images/icons/arrow.png' alt='move' class='help' title='"._move_reservation_to."'/></a>";
			
			// WAITLIST ALLOW BUTTON
			if($_SESSION['wait'] == 1){
				$leftspace = leftSpace(substr($row->reservation_time,0,5), $availability);
				if($leftspace >= $row->reservation_pax && $_SESSION['outlet_max_tables']-$tbl_availability[substr($row->reservation_time,0,5)] >= 1){	    
					echo"&nbsp;<a href='#' name='".$id."' class='alwbtn'><img src='images/icons/check-alt.png' name='".$id."' alt='"._allow."' class='help' title='"._allow."'/></a>&nbsp;&nbsp;";
				}
			}
			// EDIT/DETAIL BUTTON
			echo "<a href='?p=102&resID=".$id."'><img src='images/icons/pen-fill.png' alt='"._detail."' class='help' title='"._detail."'/></a>&nbsp;&nbsp;";
			// DELETE BUTTON
			if ( current_user_can( 'Reservation-Delete' ) && $q!=3 ){
		    	echo"<a href='#modalsecurity' name='".$row->repeat_id."' id='".$id."' class='delbtn'>
					<img src='images/icons/delete.png' alt='"._cancelled."' class='help' title='"._delete."'/></a>";
			}
		echo"</td></tr>";
		$tablesum ++;
		$guestsum += $row->reservation_pax;
			}
		}
		?>
	</tbody>
	<tfoot>

		<tr style="border:1px #000;">
			<td class=" noprint"></td><td></td>
			<td colspan="2" class="bold"><?php echo $guestsum;?>&nbsp;&nbsp;<?php echo _guest_summary;?></td>
			<td></td>
			<td colspan="2" class="bold"><?php echo $tablesum;?>&nbsp;&nbsp;<?php echo _tables_summary;?></td>
			<?php
			if($_SESSION['wait'] == 0){
				//echo "<td></td>";
			}
			?>
		</tr>
	</tfoot>
</table>
<!-- End reservation table data -->

Edited by mfandel, 26 October 2014 - 02:06 AM.

Hello Coder Guys,

I need a small help from you. I want to list all files & directories based on last file modification time of server. I want to list new files as first & old files as last.
Consider "files" as the directory name which contains all files & directories.

Please make the php code to display all files & directories from "files" directory based on last file modification time of server.

Thanks IN Advance !