|
PHP - Logic Issue? Email Validation
Hey all, trying to figure out a logic flaw in this validation script. Basically if I use !preg_match or the preg_match examples (noted below), I do not get the correct results.
My interpretation of preg_match and my current understanding of the logic is noted below (please correct me if I'm wrong).
1. If I use alternate attempt !preg_match, the regex would be compared against the "string" in the $email variable. If the regex expression matches, error will be thrown and script would stop.
2. If I use alternate attempt !preg_match, the condition would be not true and move to else where the string contained within $email variable would be run through the vld function.
3. If I maintain the current script using preg_match, if the string matches the match, the condition would be true and therefore string of $email variable runs through VLD function else cleanup and throw error...
Are my statements above correct in this context? I think I'm pretty close to cracking it but seem to be missing something simple.
The current script is referenced below, forgive me if I've lost the plot. Long hours attempting to understand this language, from what I've seen so far its great.
Thanks in advance,
A
//Alternate attempt
if (!preg_match("/^[^@]+@[^@.]+\.[^@]*\w\w/", $email)) {
$error = "Please enter a valid email address"; } else { $email = vld($_POST['email']); } Current code that doens't work: if (empty($_POST['email'])) { $error = "Email is required"; } else { if (strlen($_POST['email']) < 5) { $error = "Email is too short!"; } else { if (strlen($_POST['email']) > 30) { $error = "Email is too long!"; } else { if (preg_match("/[\(\)\<\>\,\;\:\\\"\[\]]/", $email)) { $error = "The email address contains illegal characters"; } else { if (preg_match("/^[^@]+@[^@.]+\.[^@]*\w\w/", $email)) { $email = vld($_POST['email']); } else { $error = "Please enter a valid email address"; } } } } } } Similar TutorialsThis is probably less of a language-specific question and more one related to logic, but since it's written in PHP and it's been vexing me for a few hours now, I figured I'd take a shot asking about here! Simple problem I'm trying to figure out for a class; I have a simple string of characters in the form "111-AAA" (three digits, hyphen, three letters) and I'm supposed to increment the string in a particular order. I increment the digits first, and after they've passed 999, I reset them to 000, increment the right-most column on the letters' side, and start again. I assumed this would be pretty simple, but the code I've written executes with some fairly strange results. With the file posted below, eight iterations into the outermost for() loop ought to echo "119-AAA", but I get "129-AAA" instead. And that's just the beginning - I started off with a thousand iterations so I could see just how drastically this little issue snowballs down the line. I see what's happening: before the value in the column being incremented is reset to 0 or A, the next column to be changed jumps the gun and gets incremented early. But no matter where I stick the increment expression, the same thing happens. I'm sure the problem is right here under my very nose, but I'm completely missing it...could anyone possibly show me what I'm not seeing? <html> <title>Test</title> <body> <?php $oldString = "111-AAA"; echo "Below this line is the string to be modified:<p>"; echo $oldString; echo "<p>And below this line is the modified string:<p>"; $newString = array($oldString[2], $oldString[1], $oldString[0], $oldString[6], $oldString[5], $oldString[4]); for($i=0; $i<1000; $i++) { for ($count = 0; $count < 6; $count++) { $newString[$count]++; if (($newString[$count] > 9) && ($count < 3)) { $newString[$count] = 0; break; } if (($newString[$count] == 'AA') && ($count > 2)) { $newString[$count] = 'A'; break; } if (($newString[$count] != 'AA') && ($newString[$count] != 9)) { break; } } echo $newString[2] . $newString[1] . $newString[0] . '-' . $newString[5] . $newString[4] . $newString[3] . "<br>"; } ?> </body> </html> Hi, I have done email validation. At present it shows invalid email address if I kept blank but in the same time inserted the records in database. I want user to stay at the same page if anything is invalid. if(!empty($_POST['emailId'])){ if(preg_match("/^[_a-z0-9-]+(\.[_a-z0-9-]+)*@[a-z0-9-]+(\.[a-z0-9-]+)*(\.[a-z]{2,3})$/", $_POST['emailId'])){ $records['Email']=$_POST['emailId']; } else{ $emsg="Please enter valid Email address"; }} else{ $emsg="Please enter valid Email address"; } And I have used like <tr><td>Email id</td><td><input type="text" name="emailId"></td><td><?php echo ".$emsg." ;?></td></tr> Can anybody help me in this regard? So, im trying to make my job a little easier. lol... I am constantly sending emails to the managers for escalations on calls... So I wrote this so far... (forgive my poor php skills, this is the first thing ive ever made. lol.) It does work so far, but, a friend wants to use it too, and Ive adapted it so he can enter his email address in, but, how can I make it so that it will validate only to send from @specificdomain.com ? Ive tried a few things, and just butchered it. lol.... Thanks for any help or tips. Code: [Select] <?php //$name = $_POST["email"]; $name = $_POST["name"]; $policynumber = $_POST["policynumber"]; $phonenumber = $_POST["phonenumber"]; $issue = $_POST["issue"]; $purchased = $_POST ["purchased"]; $infocheck = $_POST ["infocheck"]; $additionalinfo = stripslashes($_POST["additionalinfo"]); //checkbox value readout $mailcc = $_POST['sendmetoo']; $email_to = "SalesLevel2@specificurl.com"; // Who the email is to $email_from = $_POST['emailfrom']; // Who the email is from $email_subject = $policynumber.' - '.$issue; // The Subject of the email //here you can define whatever you want to... $headers = "MIME-Version: 1.0\r\n"; $headers .= "Content-type: text/plain; charset=UTF-8\r\n"; $headers .= "To: <".$email_to.">\r\n"; $headers .= "From: ".$email_from."\r\n"; //we control if sendmetoo is checked... if($mailcc == 'sendtome'){ $headers .= "Cc: ".$email_from."\r\n"; } //$headers .= "Bcc: noone@nowhere.com\r\n"; $email_message = "Sales Level 2,"; $email_message .= "\n\nPolicy Number: " .$policynumber; $email_message .= "\nClients Name: " .$name; $email_message .= "\nPhone Number: " .$phonenumber; $email_message .= "\nReason(s): " .$issue; $email_message .= "\nPurchased Already: " .$purchased; $email_message .= "\nAll info correct?: " .$infocheck; $email_message .= "\n\nAdditional Information: " .$additionalinfo; "\n\n\n\n". // Message that the email has in it //$headers = "From: ".$email_from; $ok = @mail($email_to, $email_subject, $email_message, $headers); if($ok) { echo "<font face=verdana size=2><center>Your message has been sent<br> to Sales Level 2<br> Click <a href=\"#\" onclick=\"history.back();\">here</a> to go back</center>"; } else { die("Sorry but the email could not be sent. Please go back and try again!"); } ?> Hey guys.. I'm completely done with my contact form data validation except I cannot seem to get one part. For my email field I need to make sure that it is a valid email address and not just words. Also, I would like to make the phone number specific length. Any ideas on how to go about this? thanks guys! <?php ini_set('display_errors', '0'); //Define Variables. $FirstName = $_GET['FirstNameTextBox']; $LastName = $_GET['LastNameTextBox']; $PhoneNumber = $_GET['PhoneNumberTextBox']; $EmailAddress = $_GET['EmailAddressTextBox']; $Address = $_GET['AddressTextBox']; $City = $_GET['CityTextBox']; $State = $_GET['StateDropDownBox']; $Zip = $_GET['ZipTextBox']; $error1='*Please enter a First Name<br>'; $error2='*Please enter a Last Name<br>'; $error3='*Please enter a Phone Number<br>'; $error4='*Please choose a state<br>'; $error5='*Please enter a valid email address<br>'; $day2 = mktime(0,0,0,date("m"),date("d")+2,date("Y")); $day3 = mktime(0,0,0,date("m"),date("d")+3,date("Y")); $day7 = mktime(0,0,0,date("m"),date("d")+7,date("Y")); // Array to collect messages $messages = array(); //Display errors. if($FirstName=="") {$messages[] = $error1; } if($LastName=="") {$messages[] = $error2; } if($PhoneNumber=="") {$messages[] = $error3; } if($State=="") {$messages[] = $error4; } if($EmailAddress=="") {$messages[] = $error5; } // Don't do this part unless we have no errors if (empty($messages)) { //Display correct contact date. if($State == "NY") { $messages[] = "Hello $FirstName $LastName! Thank you for contacting me. I will get back to you within 2 days, before " .date("d M Y", $day2); } if($State == "NJ") { $messages[] = "$Hello FirstName $LastName! Thank you for contacting me. I will get back to you within 3 days, before " .date("d M Y", $day3); } if($State == "Other") { $messages[] = "$Hello FirstName $LastName! Thank you for contacting me. I will get back to you within 1 week, before " .date("d M Y", $day7); } } // END if empty($messages echo implode('<BR>', $messages); ?> <p>--<a href="Contact_Form.html" class="style2"><span class="style1">Go Back</span></a>--</p> </body> </html> Hello i have a syntax issue in the code below, can anyone shed some light? Code: [Select] <?php if(isset($_POST['submit'])) { $drop = mysql_real_escape_string($_POST['drop_1']); $tier_two = mysql_real_escape_string($_POST['Subtype']); echo "You selected "; echo $drop." & ".$tier_two; $Name = mysql_real_escape_string($_POST["Name"]); $Phone = mysql_real_escape_string($_POST["Phone"]); $Email = mysql_real_escape_string($_POST["Email"]); $Postcode = mysql_real_escape_string($_POST["Postcode"]); $Website = mysql_real_escape_string($_POST["Website"]); if($Name == '' || $Phone == '' || $Email == '' else if (!preg_match('/^[A-Za-z0-9\-.]+$/', $domain)|| $Postcode == '' || $Website == '') { die('<br> but you did not complete all of the required fields correctly, please try again'); } } the code works fine without the " else if (!preg_match('/^[A-Za-z0-9\-.]+$/', $domain) " . As well as checking for blank fields i'd like to check for the correct email format. Many thanks. I am working on user validation through email and I am having some problems with it. I can get it to work but it gives me probloms some times. This is the link that is sent to the users after they sign up Code: [Select] mydomain/confirm.php?id=".$id."&userkey=".$userkey and this is what i have for the confirm page Code: [Select] <?php //connection info $userquery = mysql_query("SELECT * FROM user"); $active=mysql_result($userquery, "active"); $userid=mysql_result($userquery, "id"); $userkey=mysql_result($userquery, "userkey"); if ($active == 1) { printf("This account has already been activated"); echo "<br />"; } elseif($userkey != $posteduserkey){ printf("We are sorry but the data offered does not match data listed, plese contact system admin."); } else{ $query="UPDATE user SET active='1' WHERE id='$id'"; mysql_query($query) or die (mysql_error()); echo "You have activated your account"; ?> <div align="center"><br /><a href="login.php" class="nav">Back to the log in page</a></div> <?php } ?> This is the fun part. I checked that the id and userkey are correct in the link, and they are. I then replaced the & in the link with & it works in gmail but not yahoo email address. I'm not sure where else to look. Thanks in advance Hi, I need simple function to validate email address format. I have found follwoing function form google. function isemail($email){ return (bool)ereg("^[_a-z0-9-]+(\.[_a-z0-9-]+)*@[a-z0-9-]+(\.[a-z0-9-]+)*(\.[a-z]{2,3})$", $email); } It's working fine with php < 5.2. But when I'm using with PHP 5.3 is says Quote Deprecated: Function ereg() is deprecated in C:\wamp\www\*******\includes\functions.php on line 28 Is any solution to this without error disable? Thanks Hey everyone. I hope you can help me getting through this problem, because I have no idea of what else to try. I'm a web designer and sometimes modify Javascript, but my main focus is HTML and CSS, meaning I have no idea how to code in Javascript, but most importantly, how to write something from scratch in PHP. So I designed a form that works pretty well, and integrated a PHP and Javascript script to make it work. This is the form: Code: [Select] <form name="form" id="form" method="post" action="contact.php"> <p>Hello,</p> <p>My name is <input type="text" name="name">, from <input type="text" name="location">, and I'd like to get in touch with you for the following purpose:</p> <p><textarea name="message" rows="10" ></textarea></p> <p>By the way, my email address is <input type="text" name="email" id="email" placeholder="john@doe.com">, and I can prove I'm not a robot because I know the sky is <input type="text" name="code" placeholder="Red, green or blue?">.</p> <p title="Send this message."><input type="submit" id="submit" value="Take care."></p> </form> And this is the script, in an external file called contact.php: Code: [Select] <?php $name = check_input($_REQUEST['name'], "Please enter your name.") ; $location = check_input($_REQUEST['location']) ; $message = check_input($_REQUEST['message'], "Please write a message.") ; $email = check_input($_REQUEST['email'], "Please enter a valid email address.") ; if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/",$email)) {die("E-mail address not valid");} if (strtolower($_POST['code']) != 'blue') {die('You are definitely a robot.');} $mail_status = mail( "my@email.com", "Hey!", "Hello,\n\n$message\n\nRegards,\n\n$name\n$location", "From: $email $name" ); function check_input($data, $problem='') { $data = trim($data); $data = stripslashes($data); $data = htmlspecialchars($data); if ($problem && strlen($data) == 0) { show_error($problem); } return $data; } function show_error($myError) { ?> <html> <body> <b>Please correct the following error:</b><br /> <?php echo $myError; ?> </body> </html> <?php exit(); } if ($mail_status) { ?> <script language="javascript" type="text/javascript"> alert('Thank you for the message. I will try to respond as soon as I can.'); window.location = '/about'; </script> <?php } else { ?> <script language="javascript" type="text/javascript"> alert('There was an error. Please try again in a few minutes, or send the message directly to aalejandro@bitsland.com.'); window.location = '/about'; </script> <?php } ?> So what it does is this: if everything's OK, it sends an email with "Hey!" as the subject, "[name]" as the sender, "Hello, [message]. Regards, [name], [location]" as the body, and a popup saying the message was delivered appears. If something fails, it outputs the error in a new address, so the user will have to go back to the form and correct the error. What I actually want to happen is this: if everything's OK, a <p> which was hidden beneath the form appears saying the message was delivered, or, alternatively, make the submit button gray out and confirm the message was delivered. I found a script to make this happen, but with "Please wait...", so the user can't resubmit the form. If there's an error, I'd like another <p> which was hidden to appear with the specific error, so there'd be many <p>'s hidden with different IDs. If possible, I'd also like to change the CSS style of the input field, specifically changing the border color to red, so it'd be a change in class for the particular field. -- So in essence, I want the errors and the success messages to output in the same page as the form (without refresh), and a change of class in the input fields that have an error. Thanks in advance, and please let me know if it'll be possible. Hi guys, Trying to ge this to work: function checkEmail($useremail) { if (!preg_match("/^( [a-zA-Z0-9] )+( [a-zA-Z0-9\._-] )*@( [a-zA-Z0-9_-] )+( [a-zA-Z0-9\._-] +)+$/" , $useremail)) { return false; $error = '<div id="blackText"><p>Sorry! Please check your email address and try again!<p><p><a href="forumsSignUp.php">Back</a></p></div>'; } return true; //PASSWORD AND OTHER VALIDATION STUFF, blah blah blah } But its just not. Everything works fine if I remove this though. Can anyone suggest an alternative to email address validation? Thanks! I am using this a modal window(jBox) - with a web Form in it, that requires the Form (just Name & Email) to be completed and Submitted in order to close the modal window - allowing access to the main page. The Form uses this corresponding ../submit.php which this:
if (empty($_POST['name'])|| empty($_POST['email'])){
$response['success'] = false;
} else {
$response['success'] = true;
}
echo json_encode($response);
where, upon Form > submit, successfully shows 'error' if the Form fields are not populated, and 'success' when the Form fields are populated/submitted.
I'd like the Form to require a proper/valid email address and avoid spam and header injection Any assistance/guidance is appreciated
This topic has been moved to JavaScript Help. http://www.phpfreaks.com/forums/index.php?topic=359169.0 Hello guys, I just want to ask if someone can share me codes in php where i can validate the connection of the mail server. I am going to trap this error: Quote Warning: mail() [function.mail]: Failed to connect to mailserver.... Instead of this message showing, I want it to be formal. It will be like this: Quote You cannot connect to you're mail server. Please contact the administrator. And lastly I want to have a validation if an email is existing or not. I want a script which checks first the email if it is existing before sending the message. I hope someone will post their idea here. Thanks in Advance. --CHILL I have made a form that asks a user for email, first name, last name, and password. I am using Spry validation tools in Dreamweaver. When I used those only, I did not have a problem. The problem began once I tried to actually check to see if the email was already registered. I have tried changing so many things like what $_POST variable to look for at the beginning, to different db connection arrangements. I am stumped. The only other thing I can think of is that I have the order wrong somehow in the logic. Thanks for the help. First, here is the form: Code: [Select] Enter Email<?php if($error_email_taken) echo ": $error_email_taken."; ?> <form name="form1" method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>"> <input name="email" type="text" id="email" value="<?php if($_POST["email"]) echo $_POST["email"]; ?>"> <input name="first" type="text" id="first" value="<?php if($_POST["first"]) echo $_POST["first"]; ?>"> <input name="last" type="text" id="last" value="<?php if($_POST["last"]) echo $_POST["last"]; ?>"> <input name="pass" type="password" class="formText1" id="pass" value="<?php if($_POST["pass"]) echo $_POST["pass"]; ?>"> <input type="submit" name="Submit" value="Submit"></td> </form> And the email verification and insert, which is placed before the opening html tag. Code: [Select] <?php if($_POST['Submit']) { //Check to see if email is registered. $email = $_POST['email']; $dbc=mysqli_connect(DB_HOST, DB_USER, DB_PASSWORD, DB_NAME); $q_1 = "SELECT users_email FROM table WHERE users_email = $email"; $r_1 = mysqli_query($dbc, $q_1); $rows_1 = mysqli_num_rows($r_1); if ($rows_1 == 0) { //If 0, email is not already registered. $new_email = $_POST['email']; } else { $error_email_taken = "This email is already registered."; } //If everything is good, insert the information. if(isset($new_email)) { $first_name = $_POST['first']; $last_name = $_POST['last']; $password = $_POST['pass']; //Insert User information. $q_2 = "INSERT INTO table (users_email, users_first, users_last, users_pass) VALUES ('$new_email', '$first_name', '$last_name', '$password')"; $r_2 = mysqli_query($dbc, $q_2); //Go to new page if form was submitted and information properly inserted. header('Location: new_page.php'); }//End: if($new_email) } //End: if $_POST['submit'] ?> I've simplified it as much as I could. I totally eliminated stuff like a password hash, etc. because I wanted to get it down to the most simple form, so once this gets working, I'll add that other stuff later. Thanks so much again. This topic has been moved to Miscellaneous. http://www.phpfreaks.com/forums/index.php?topic=349030.0 Having a validation issue when a person enters a - in there name it is kicking it back as invalid. For axample:
Mary-Ann Invalid Tried including the - but causing myself a lot of grief.
function filterkudoagent($field){
// Sanitize user name
$field = filter_var(trim($field), FILTER_SANITIZE_STRING);
// Validate user name
if(filter_var($field, FILTER_VALIDATE_REGEXP, array("options"=>array("regexp"=>"/^[a-zA-Z\s]+$/")))){
return $field;
} else {
return FALSE;
}
}
Edited October 1, 2019 by SkyRanger I want to submit data of my student registration form to the database. If an admission number already exists, a message should be displayed like this. "Admission number2012/1..This student has been already entered to the system." I have created the below coding which fulfill the above task. But i want slight modification, rather than displaying the message in a seperate field after entering all the fields i want the message to display soon after entering the "Admission Number" in my form. newStudentRegistrationFormValidation.php Code: [Select] <?php $admission_no=$_POST['admission_no']; $admission_date=$_POST['admission_date']; $full_name=$_POST['full_name']; $name_with_initial=$_POST['name_with_initial']; $date_of_birth=$_POST['date_of_birth']; $religion=$_POST['religion']; //$gender=$_POST['gender']; $address=$_POST['address']; $telephone=$_POST['telephone']; $grade_on_admission=$_POST['grade_on_admission']; $grade_ID=$_POST['grade_ID']; $stream_ID=isset($_POST['stream_ID']); $class_ID=$_POST['class_ID']; $student_house=$_POST['student_house']; $password=$_POST['password']; $description_about_st=$_POST['description_about_st']; $payment=$_POST["payment"]; $currentdate=getdate(time()); $year=$currentdate["year"]; //admission number validation $con=mysql_connect("localhost","root",""); mysql_select_db("student_management",$con); $query="SELECT admission_no FROM student_info Where student_info.admission_no='$admission_no'"; $result=mysql_query($query) ; $num_rows = mysql_num_rows($result); echo $num_rows; if($num_rows >= 0) { header("location:student registrationDatabase.php?admission_no=".urlencode($admission_no)."&year=".urlencode($year)."&admission_date=".urlencode($admission_date)."&full_name=".urlencode($full_name)."&name_with_initial=".urlencode($name_with_initial)."&date_of_birth=".urlencode($date_of_birth)."&religion=".urlencode($religion)."&address=".urlencode($address)."&telephone=".urlencode($telephone)."&grade_on_admission=".urlencode($grade_on_admission)."&grade_ID=".urlencode($grade_ID)."&stream_ID=".urlencode($stream_ID)."&class_ID=".urlencode($class_ID)."&student_house=".urlencode($student_house)."&password=".urlencode($password)."&description_about_st=".urlencode($description_about_st)."&payment=".urlencode($payment)); exit(); }else{ ?> <body> <?php echo "Admission number".$admission_no." .This student has been already entered to the system ."."<BR>"."<BR>"."<BR>"; echo "<a href='newStudentRegistrationForm.php'>GO to manage student details page</a> "; exit(); }?> </body> </html>
Hi all,
I am trying to validate my contact page for phone # and country.
I am not able to show warnings for country and phone#. Not sure what needs to be done.
Please help.
The code is as below
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>Contact Us</title>
<style>
.error {color: #FF0000;}
</style>
</head>
<body>
<?php
// define variables and set to empty values
$nameErr = $emailErr = $genderErr = $websiteErr = $countryErr = $phonenoErr = "";
$name = $email = $gender = $comment = $website = $country = $phoneno = "";
if ($_SERVER["REQUEST_METHOD"] == "POST") {
if (empty($_POST["name"])) {
$nameErr = "Name is required";
} else {
$name = test_input($_POST["name"]);
// check if name only contains letters and whitespace
if (!preg_match("/^[a-zA-Z ]*$/",$name)) {
$nameErr = "Only letters and white space allowed";
}
}
if (empty($_POST["email"])) {
$emailErr = "Email is required";
} else {
$email = test_input($_POST["email"]);
// check if e-mail address syntax is valid
if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/",$email)) {
$emailErr = "Invalid email format";
}
}
if (empty($_POST["website"])) {
$website = "";
} else {
$website = test_input($_POST["website"]);
// check if URL address syntax is valid (this regular expression also allows dashes in the URL)
if (!preg_match("/\b(?:(?:https?|ftp):\/\/|www\.)[-a-z0-9+&@#\/%?=~_|!:,.;]*[-a-z0-9+&@#\/%=~_|]/i",$website)) {
$websiteErr = "Invalid URL";
}
}
if (empty($_POST["comment"])) {
$comment = "";
} else {
$comment = test_input($_POST["comment"]);
}
if (empty($_POST["gender"])) {
$genderErr = "Gender is required";
} else {
$gender = test_input($_POST["gender"]);
}
{
if (empty($_POST["country"])) {
$nameErr = "Please select your country";
} else {
$name = test_input($_POST["country"]);
}}
}
function test_input($data) {
$data = trim($data);
$data = stripslashes($data);
$data = htmlspecialchars($data);
return $data;
}
?>
<h2>Contact Us</h2>
<form method="post" action="<?php echo htmlspecialchars($_SERVER["PHP_SELF"]);?>">
Name: <input type="text" name="name">
<span class="error">* <?php echo $nameErr;?></span>
<br><br>
E-mail: <input type="text" name="email">
<span class="error">* <?php echo $emailErr;?></span>
<br><br>
<!--Website: <input type="text" name="website">-->
<span class="error"><?php echo $websiteErr;?></span>
<br><br> Gender:
<input type="radio" name="gender" value="female">Female
<input type="radio" name="gender" value="male">Male
<span class="error">* <?php echo $genderErr;?></span>
<br><br>
<label for="country">Country:</label>
<select name="country">
<option value='Choose your country' selected='selected'></option>
<option value="AF">Afghanistan</option>
<option value="AX">Ã…Land Islands</option>
<option value="AL">Albania</option>
<option value="DZ">Algeria</option>
<option value="AS">American Samoa</option>
<option value="AD">Andorra</option>
<option value="AO">Angola</option>
<option value="AI">Anguilla</option>
<option value="AQ">Antarctica</option>
<option value="AG">Antigua And Barbuda</option>
<option value="AR">Argentina</option>
<option value="AM">Armenia</option>
<option value="AW">Aruba</option>
<option value="AU">Australia</option>
<option value="AT">Austria</option>
<option value="AZ">Azerbaijan</option>
<option value="BS">Bahamas</option>
<option value="BH">Bahrain</option>
<option value="BD">Bangladesh</option>
<option value="BB">Barbados</option>
<option value="BY">Belarus</option>
<option value="BE">Belgium</option>
<option value="BZ">Belize</option>
<option value="BJ">Benin</option>
<option value="BM">Bermuda</option>
<option value="BT">Bhutan</option>
<option value="BO">Bolivia</option>
<option value="BA">Bosnia And Herzegovina</option>
<option value="BW">Botswana</option>
<option value="BV">Bouvet Island</option>
<option value="BR">Brazil</option>
<option value="IO">British Indian Ocean Territory</option>
<option value="BN">Brunei Darussalam</option>
<option value="BG">Bulgaria</option>
<option value="BF">Burkina Faso</option>
<option value="BI">Burundi</option>
<option value="KH">Cambodia</option>
<option value="CM">Cameroon</option>
<option value="CA">Canada</option>
<option value="CV">Cape Verde</option>
<option value="KY">Cayman Islands</option>
<option value="CF">Central African Republic</option>
<option value="TD">Chad</option>
<option value="CL">Chile</option>
<option value="CN">China</option>
<option value="CX">Christmas Island</option>
<option value="CC">Cocos (Keeling) Islands</option>
<option value="CO">Colombia</option>
<option value="KM">Comoros</option>
<option value="CG">Congo</option>
<option value="CD">Congo, The Democratic Republic Of The</option>
<option value="CK">Cook Islands</option>
<option value="CR">Costa Rica</option>
<option value="CI">Cote D'Ivoire</option>
<option value="HR">Croatia</option>
<option value="CU">Cuba</option>
<option value="CY">Cyprus</option>
<option value="CZ">Czech Republic</option>
<option value="DK">Denmark</option>
<option value="DJ">Djibouti</option>
<option value="DM">Dominica</option>
<option value="DO">Dominican Republic</option>
<option value="EC">Ecuador</option>
<option value="EG">Egypt</option>
<option value="SV">El Salvador</option>
<option value="GQ">Equatorial Guinea</option>
<option value="ER">Eritrea</option>
<option value="EE">Estonia</option>
<option value="ET">Ethiopia</option>
<option value="FK">Falkland Islands (Malvinas)</option>
<option value="FO">Faroe Islands</option>
<option value="FJ">Fiji</option>
<option value="FI">Finland</option>
<option value="FR">France</option>
<option value="GF">French Guiana</option>
<option value="PF">French Polynesia</option>
<option value="TF">French Southern Territories</option>
<option value="GA">Gabon</option>
<option value="GM">Gambia</option>
<option value="GE">Georgia</option>
<option value="DE">Germany</option>
<option value="GH">Ghana</option>
<option value="GI">Gibraltar</option>
<option value="GR">Greece</option>
<option value="GL">Greenland</option>
<option value="GD">Grenada</option>
<option value="GP">Guadeloupe</option>
<option value="GU">Guam</option>
<option value="GT">Guatemala</option>
<option value="Gg">Guernsey</option>
<option value="GN">Guinea</option>
<option value="GW">Guinea-Bissau</option>
<option value="GY">Guyana</option>
<option value="HT">Haiti</option>
<option value="HM">Heard Island And Mcdonald Islands</option>
<option value="VA">Holy See (Vatican City State)</option>
<option value="HN">Honduras</option>
<option value="HK">Hong Kong</option>
<option value="HU">Hungary</option>
<option value="IS">Iceland</option>
<option value="IN">India</option>
<option value="ID">Indonesia</option>
<option value="IR">Iran, Islamic Republic Of</option>
<option value="IQ">Iraq</option>
<option value="IE">Ireland</option>
<option value="IM">Isle Of Man</option>
<option value="IL">Israel</option>
<option value="IT">Italy</option>
<option value="JM">Jamaica</option>
<option value="JP">Japan</option>
<option value="JE">Jersey</option>
<option value="JO">Jordan</option>
<option value="KZ">Kazakhstan</option>
<option value="KE">Kenya</option>
<option value="KI">Kiribati</option>
<option value="KP">Korea, Democratic People'S Republic Of</option>
<option value="KR">Korea, Republic Of</option>
<option value="KW">Kuwait</option>
<option value="KG">Kyrgyzstan</option>
<option value="LA">Lao People'S Democratic Republic</option>
<option value="LV">Latvia</option>
<option value="LB">Lebanon</option>
<option value="LS">Lesotho</option>
<option value="LR">Liberia</option>
<option value="LY">Libyan Arab Jamahiriya</option>
<option value="LI">Liechtenstein</option>
<option value="LT">Lithuania</option>
<option value="LU">Luxembourg</option>
<option value="MO">Macao</option>
<option value="MK">Macedonia, The Former Yugoslav Republic Of</option>
<option value="MG">Madagascar</option>
<option value="MW">Malawi</option>
<option value="MY">Malaysia</option>
<option value="MV">Maldives</option>
<option value="ML">Mali</option>
<option value="MT">Malta</option>
<option value="MH">Marshall Islands</option>
<option value="MQ">Martinique</option>
<option value="MR">Mauritania</option>
<option value="MU">Mauritius</option>
<option value="YT">Mayotte</option>
<option value="MX">Mexico</option>
<option value="FM">Micronesia, Federated States Of</option>
<option value="MD">Moldova, Republic Of</option>
<option value="MC">Monaco</option>
<option value="MN">Mongolia</option>
<option value="MS">Montserrat</option>
<option value="MA">Morocco</option>
<option value="MZ">Mozambique</option>
<option value="MM">Myanmar</option>
<option value="NA">Namibia</option>
<option value="NR">Nauru</option>
<option value="NP">Nepal</option>
<option value="NL">Netherlands</option>
<option value="AN">Netherlands Antilles</option>
<option value="NC">New Caledonia</option>
<option value="NZ">New Zealand</option>
<option value="NI">Nicaragua</option>
<option value="NE">Niger</option>
<option value="NG">Nigeria</option>
<option value="NU">Niue</option>
<option value="NF">Norfolk Island</option>
<option value="MP">Northern Mariana Islands</option>
<option value="NO">Norway</option>
<option value="OM">Oman</option>
<option value="PK">Pakistan</option>
<option value="PW">Palau</option>
<option value="PS">Palestinian Territory, Occupied</option>
<option value="PA">Panama</option>
<option value="PG">Papua New Guinea</option>
<option value="PY">Paraguay</option>
<option value="PE">Peru</option>
<option value="PH">Philippines</option>
<option value="PN">Pitcairn</option>
<option value="PL">Poland</option>
<option value="PT">Portugal</option>
<option value="PR">Puerto Rico</option>
<option value="QA">Qatar</option>
<option value="RE">Reunion</option>
<option value="RO">Romania</option>
<option value="RU">Russian Federation</option>
<option value="RW">Rwanda</option>
<option value="SH">Saint Helena</option>
<option value="KN">Saint Kitts And Nevis</option>
<option value="LC">Saint Lucia</option>
<option value="PM">Saint Pierre And Miquelon</option>
<option value="VC">Saint Vincent And The Grenadines</option>
<option value="WS">Samoa</option>
<option value="SM">San Marino</option>
<option value="ST">Sao Tome And Principe</option>
<option value="SA">Saudi Arabia</option>
<option value="SN">Senegal</option>
<option value="CS">Serbia And Montenegro</option>
<option value="SC">Seychelles</option>
<option value="SL">Sierra Leone</option>
<option value="SG">Singapore</option>
<option value="SK">Slovakia</option>
<option value="SI">Slovenia</option>
<option value="SB">Solomon Islands</option>
<option value="SO">Somalia</option>
<option value="ZA">South Africa</option>
<option value="GS">South Georgia And The South Sandwich Islands</option>
<option value="ES">Spain</option>
<option value="LK">Sri Lanka</option>
<option value="SD">Sudan</option>
<option value="SR">Suriname</option>
<option value="SJ">Svalbard And Jan Mayen</option>
<option value="SZ">Swaziland</option>
<option value="SE">Sweden</option>
<option value="CH">Switzerland</option>
<option value="SY">Syrian Arab Republic</option>
<option value="TW">Taiwan, Province Of China</option>
<option value="TJ">Tajikistan</option>
<option value="TZ">Tanzania, United Republic Of</option>
<option value="TH">Thailand</option>
<option value="TL">Timor-Leste</option>
<option value="TG">Togo</option>
<option value="TK">Tokelau</option>
<option value="TO">Tonga</option>
<option value="TT">Trinidad And Tobago</option>
<option value="TN">Tunisia</option>
<option value="TR">Turkey</option>
<option value="TM">Turkmenistan</option>
<option value="TC">Turks And Caicos Islands</option>
<option value="TV">Tuvalu</option>
<option value="UG">Uganda</option>
<option value="UA">Ukraine</option>
<option value="AE">United Arab Emirates</option>
<option value="GB">United Kingdom</option>
<option value="US">United States</option>
<option value="UM">United States Minor Outlying Islands</option>
<option value="UY">Uruguay</option>
<option value="UZ">Uzbekistan</option>
<option value="VU">Vanuatu</option>
<option value="VE">Venezuela</option>
<option value="VN">Viet Nam</option>
<option value="VG">Virgin Islands, British</option>
<option value="VI">Virgin Islands, U.S.</option>
<option value="WF">Wallis And Futuna</option>
<option value="EH">Western Sahara</option>
<option value="YE">Yemen</option>
<option value="ZM">Zambia</option>
<option value="ZW">Zimbabwe</option>
</select>
<span class="error"><?php echo $countryErr; ?></span>
<br><br>
<label for="phone">Phone Number (With Country Code):</label>
<input id="phone" name="phone" class="text" />
<span class="error"><?php echo $phonenoErr;?></span>
<br><br>
Comment: <textarea name="comment" rows="5" cols="40"></textarea>
<br><br>
<input type="submit" name="submit" value="Submit">
</form>
Hi Guys, I have a small issue with a new php script I wrote. It works fine, except for one issue. When the scrip emails me the info it captures, I need it to have the email sent to me from the person filling out the form. i.e. from the email address located in the $email field. It does not. Here's the code. (domain.com is just a dummy name to hold the spot, obviously.) <?php /* Subject and email */ $emailSubject = 'Centre Street Registration'; $webMaster = 'email@domain.com'; /* Gathering Data */ $firstname = $_POST['FirstName']; $lastname = $_POST['LastName']; $email = $_POST['Email']; $daytime = $_POST['Daytime']; $home = $_POST['Home']; $citytown = $_POST['CityTown']; $movingwhen = $_POST['MovingWhen']; $hearofus = $_POST['HearofUs']; $contactmethod = $_POST['ContactMethod']; $squareft = $_POST['SqareFt']; $important = $_POST['Important']; $pricerange = $_POST['PriceRange']; $body = <<<EOD First Name: $firstname Last Name: $lastname Email: $email Daytime Number: $daytime Home Number: $home City: $citytown Moving When: $movingwhen Hear of Us: $hearofus Contact Method: $contactmethod Square Feet: $squareft Important to You: $important Price Range: $pricerange Excel Data: $firstname,$lastname,$email,$daytime,$home,$citytown,$movingwhen,$hearofus,$contactmethod,$squareft,$important,$pricerange EOD; $headers = "From: $email"; $headers .= "Conten-type: text/html"; $success = mail($webMaster, $emailSubject, $body); /* Results rendered as HTML */ /* $theResults = 'domain.com'; */ header( "Location: http://www.dommain.com/thankyou_centre.shtml" ); ?> Script sends out text/plain email using php's mail() construct .... all working fine. However, I had a user use Novell GroupWise to receive an email and it chops the formatting up pretty hard. Specifically, any \r\n characters are translated into =09=0D=0A and carriage returns are replaced with =5F=5F Right now, I am setting UTF-8 in the mail header, anyone know of a better, more universally accepted charset? |
|||||||