|
PHP - Need Help With This Error Sqlstate[42000]: Syntax Error Or Access Violation: 1064
I have a pdo prepared statement that fetches records from mysql database. The records show up on the page. However if there are no records on a page, I get this error message.
"QLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-10' at line 4"
Here is my statement
$getCategoryId = $_GET['id'];
$limit = 10;
$offset = ($page - 1) * $limit;
$statement = $db->prepare("SELECT records.*, categories.* FROM records
LEFT JOIN categories ON records.category_id = categories.category_id
WHERE records.category_id = :category_id
ORDER BY record_id DESC LIMIT {$limit} OFFSET ".$offset);
$statement->bindParam('category_id', $getCategoryId);
$statement->execute();
$results = $statement->fetchAll(PDO::FETCH_ASSOC);
If I remove try and catch block, it'll tell me exactly which line is giving the issue. So from the above code, the error has to do with "$statement->execute();". This is where the error occurs.
As far as I know, the above pdo statement is correct. Can you tell me if something is wrong with it?
Edited by helloworld001, 16 December 2014 - 04:14 PM. Similar TutorialsHello all,
Appreciate if you folks could pls. help me understand (and more importantly resolve) this very weird error:
Fatal error: Uncaught exception 'PDOException' with message 'SQLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ASC, purchase_later_flag ASC, shopper1_buy_flag AS' at line 3' in /var/www/index.php:67 Stack trace: #0 /var/www/index.php(67): PDO->query('SELECT shoplist...') #1 {main} thrown in /var/www/index.php on line 67
Everything seems to work fine when/if I use the following SQL query (which can also be seen commented out in my code towards the end of this post) :
$sql = "SELECT shoplist.*, store_master.store_name, item_master.item_name FROM shoplist, store_master, item_master WHERE shoplist.store_id = store_master.store_id AND shoplist.item_id = item_master.item_id";However, the moment I change my query to the following, which essentially just includes/adds the ORDER BY clause, I receive the error quoted above: $sql = "SELECT shoplist.*, store_master.store_name, item_master.item_name FROM shoplist, store_master, item_master ORDER BY purchased_flag ASC, purchase_later_flag ASC, shopper1_buy_flag ASC, shopper2_buy_flag ASC, store_name ASC) WHERE shoplist.store_id = store_master.store_id AND shoplist.item_id = item_master.item_id";In googling for this error I came across posts that suggested using "ORDER BY FIND_IN_SET()" and "ORDER BY FIELD()"...both of which I tried with no success. Here's the portion of my code which seems to have a problem, and line # 67 is the 3rd from bottom (third last) statement in the code below: <?php
/*
$sql = "SELECT shoplist.*, store_master.store_name, item_master.item_name
FROM shoplist, store_master, item_master
WHERE shoplist.store_id = store_master.store_id
AND shoplist.item_id = item_master.item_id";
*/
$sql = "SELECT shoplist.*, store_master.store_name, item_master.item_name
FROM shoplist, store_master, item_master
ORDER BY FIND_IN_SET(purchased_flag ASC,
purchase_later_flag ASC,
shopper1_buy_flag ASC,
shopper2_buy_flag ASC,
store_name ASC)
WHERE shoplist.store_id = store_master.store_id
AND shoplist.item_id = item_master.item_id";
$result = $pdo->query($sql);
// foreach ($pdo->query($sql) as $row) {
foreach ($result as $row) {
echo '<tr>';
print '<td><span class="filler-checkbox"><input type="checkbox" name="IDnumber[]" value="' . $row["idnumber"] . '" /></span></td>';
Thanks
I have been pulling my hair out for the lasy 3 hours i am trying to update a MySql table but i cant get it too work, i just keep getting MySql error #1064 - You have an error in your SQL syntax; if i just update 1 field it works fine but if i try to update more than 1 field it dosent work, Help Please! <?php $root = $_SERVER['DOCUMENT_ROOT']; require("$root/include/mysqldb.php"); require("$root/include/incpost.php"); $con = mysql_connect("$dbhost","$dbuser","$dbpass"); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("$dbame", $con); mysql_query("UPDATE Reg_Profile_p SET build='$build' col='$col' size='$size' WHERE uin = '$uinco'"); ?> Parse error: syntax error, unexpected T_STRING in C:\xampp\htdocs\mywork\unique.php on line 15 <html> <head> <title> </title> </head> <body bgproperties="fixed"> <?php $dbhost = 'localhost'; $dbuser = 'root'; $dbpass = ''; $con = mysql_connect($dbhost, $dbuser, $dbpass) or die ('Error connecting to mysql'); $dbname = 'mywork'; mysql_select_db($dbname, $con); $sql=mysql_query(insert into users (regno,name,gender,date,month,year,emailid,cell,paddress,caddress,incometype,incomeamt,dad,fyes,dadocup,mom,myes,momocup,password) VALUES ('$_POST[regno]','$_POST[name]','$_POST[gender]','$_POST[date]','$_POST[month]','$_POST[year]','$_POST[emailid]','$_POST[cell]','$_POST[paddress]','$_POST[caddress]','$_POST[incometype]','$_POST[incomeamt]','$_POST[dad]','$_POST[fyes]','$_POST[dadocup]','$_POST[mom]','$_POST[myes]','$_POST[momocup]','$_POST[password]')"); $sql1=mysql_fetch_array($sql); $result = @mysql_query($SQl1); $result="SELECT * FROM users WHERE regno='$regno'"; while($row = mysql_fetch_array($result)) { //echo $row['regno']."regno<br>"; //echo $row['name']."name<br>"; //echo $row['gender']."gender<br>"; //echo $row['date']."date<br>"; //echo $row['month']."month<br>"; //echo $row['year']."year<br>"; //echo $row['emailid']."emailid<br>"; //echo $row['cell']."cell<br>"; //echo $row['paddress']."paddress<br>"; //echo $row['caddress']."caddress<br>"; //echo $row['incometype']."incometype<br>"; //echo $row['incomeamt']."incomeamt<br>"; //echo $row['dad']."dad<br>"; //echo $row['fyes']."fyes<br>"; //echo $row['dadocup']."dadocup<br>"; //echo $row['mom']."mom<br>"; //echo $row['myes']."myes<br>"; //echo $row['momocup']."momocup<br>"; //echo $row['password']."password<br>"; } echo "Thanks for Register!"; if (!mysql_query($sql,$con)) { die('Error: ' . mysql_error()); } echo "1 record added"; mysql_close($con); ?> <form name="security" action="index.php" method="post"> <input type="submit" value="click here to login"> </form> </body> </html> Hi guys,
I am having a hard time trying to figure out why this gives me an error?
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 10
/**
* Baobab (an implementation of Nested Set Model)
*
* Copyright 2010 Riccardo Attilio Galli <riccardo@sideralis.org> [http://www.sideralis.org]
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* .. note::
* Each occurrence of the word "GENERIC" across this file is meant to be
* replaced with the name of the tree (which must be a valid string to use
* as SQL table name).
*/
/* ############################### */
/* ###### TABLES AND VIEWS ####### */
/* ############################### */
CREATE TABLE IF NOT EXISTS GENERIC (
tree_id INTEGER UNSIGNED NOT NULL,
id INTEGER UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY,
lft INTEGER NOT NULL CHECK (lft > 0),
rgt INTEGER NOT NULL CHECK (rgt > 1),
INDEX(tree_id),
INDEX(lft),
CONSTRAINT order_okay CHECK (lft < rgt)
) ENGINE INNODB;
DROP VIEW IF EXISTS GENERIC_AdjTree;
CREATE VIEW GENERIC_AdjTree (tree_id,parent,child,lft)
AS
SELECT E.tree_id,B.id, E.id, E.lft
FROM GENERIC AS E
LEFT OUTER JOIN GENERIC AS B
ON B.lft = ( SELECT MAX(lft)
FROM GENERIC AS S
WHERE E.lft > S.lft
AND E.lft < S.rgt
AND E.tree_id=S.tree_id)
AND B.tree_id=E.tree_id
ORDER BY lft ASC;
/* ##### LIST OF TREE NAMES IN USE ##### */
CREATE TABLE IF NOT EXISTS Baobab_ForestsNames (
name VARCHAR(200) PRIMARY KEY
) ENGINE INNODB DEFAULT CHARSET=utf8;
INSERT INTO Baobab_ForestsNames(name) VALUES ('GENERIC')
ON DUPLICATE KEY UPDATE name=name;
/* ##################################### */
/* ########################### */
/* ###### ERRORS CONTROL ##### */
/* ########################### */
CREATE TABLE IF NOT EXISTS Baobab_Errors (
code INTEGER UNSIGNED NOT NULL PRIMARY KEY,
name VARCHAR(50) NOT NULL,
msg TINYTEXT NOT NULL,
CONSTRAINT unique_codename UNIQUE (name)
) ENGINE INNODB;
INSERT INTO Baobab_Errors(code,name,msg)
VALUES
(1000,'VERSION','1.3.1'),
(1100,'ROOT_ERROR','Cannot add or move a node next to root'),
(1200,'CHILD_OF_YOURSELF_ERROR','Cannot move a node inside his own subtree'),
(1300,'INDEX_OUT_OF_RANGE','The index is out of range'),
(1400,'NODE_DOES_NOT_EXIST',"Node doesn't exist"),
(1500,'VERSION_NOT_MATCH',"The library and the sql schema have different versions")
ON DUPLICATE KEY UPDATE code=code,name=name,msg=msg;
DROP FUNCTION IF EXISTS Baobab_getErrCode;
CREATE FUNCTION Baobab_getErrCode(x TINYTEXT) RETURNS INT
DETERMINISTIC
RETURN (SELECT code from Baobab_Errors WHERE name=x);
/* ########################## */
/* ######## DROP TREE ####### */
/* ########################## */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_DropTree;
CREATE PROCEDURE Baobab_GENERIC_DropTree (
IN node INTEGER UNSIGNED,
IN update_numbers INTEGER)
LANGUAGE SQL
DETERMINISTIC
MODIFIES SQL DATA
BEGIN
DECLARE drop_tree_id INTEGER UNSIGNED;
DECLARE drop_id INTEGER UNSIGNED;
DECLARE drop_lft INTEGER UNSIGNED;
DECLARE drop_rgt INTEGER UNSIGNED;
/*
declare exit handler for not found rollback;
declare exit handler for sqlexception rollback;
declare exit handler for sqlwarning rollback;
*/
/* save the dropped subtree data with a singleton SELECT */
START TRANSACTION;
/* save the dropped subtree data with a singleton SELECT */
SELECT tree_id, id, lft, rgt
INTO drop_tree_id, drop_id, drop_lft, drop_rgt
FROM GENERIC
WHERE id = node;
/* subtree deletion is easy */
DELETE FROM GENERIC
WHERE tree_id=drop_tree_id AND lft BETWEEN drop_lft and drop_rgt;
IF update_numbers = 1 THEN
/* close up the gap left by the subtree */
UPDATE GENERIC
SET lft = CASE WHEN lft > drop_lft
THEN lft - (drop_rgt - drop_lft + 1)
ELSE lft END,
rgt = CASE WHEN rgt > drop_lft
THEN rgt - (drop_rgt - drop_lft + 1)
ELSE rgt END
WHERE tree_id=drop_tree_id AND (lft > drop_lft OR rgt > drop_lft);
END IF;
COMMIT;
END;
/* ########################## */
/* ###### APPEND CHILD ###### */
/* ########################## */
/* Add a new child to a parent as last sibling
If parent_id is 0, insert a new root node, moving the
previous root (if any) as his child.
If choosen_tree is 0, use the first available integer as id.
If choosen_tree is not present as tree_id in the table, it is used.
*/
DROP PROCEDURE IF EXISTS Baobab_GENERIC_AppendChild;
CREATE PROCEDURE Baobab_GENERIC_AppendChild(
IN choosen_tree INTEGER UNSIGNED,
IN parent_id INTEGER UNSIGNED,
OUT new_id INTEGER UNSIGNED,
OUT cur_tree_id INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
BEGIN
DECLARE num INTEGER UNSIGNED;
START TRANSACTION;
SET cur_tree_id = IF(choosen_tree > 0,
choosen_tree,
IFNULL((SELECT MAX(tree_id)+1 FROM GENERIC),1)
);
IF parent_id = 0 THEN /* inserting a new root node*/
UPDATE GENERIC
SET lft = lft+1, rgt = rgt+1
WHERE tree_id=cur_tree_id;
SET num = IFNULL((SELECT MAX(rgt)+1 FROM GENERIC WHERE tree_id=cur_tree_id),2);
INSERT INTO GENERIC(tree_id, id, lft, rgt)
VALUES (cur_tree_id, NULL, 1, num);
ELSE /* append a new node as last right child of his parent */
SET num = (SELECT rgt
FROM GENERIC
WHERE id = parent_id
);
UPDATE GENERIC
SET lft = CASE WHEN lft > num
THEN lft + 2
ELSE lft END,
rgt = CASE WHEN rgt >= num
THEN rgt + 2
ELSE rgt END
WHERE tree_id=cur_tree_id AND rgt >= num;
INSERT INTO GENERIC(tree_id, id, lft, rgt)
VALUES (cur_tree_id,NULL, num, (num + 1));
END IF;
SELECT LAST_INSERT_ID() INTO new_id;
COMMIT;
END;
/* ############################### */
/* ###### INSERT NODE AFTER ###### */
/* ############################### */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_insertAfter;
CREATE PROCEDURE Baobab_GENERIC_insertAfter(
IN sibling_id INTEGER UNSIGNED,
OUT new_id INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
IF 1 = (SELECT lft FROM GENERIC WHERE id = sibling_id) THEN
BEGIN
SELECT Baobab_getErrCode('ROOT_ERROR') INTO error_code;
LEAVE main;
END;
ELSE
BEGIN
DECLARE lft_sibling INTEGER UNSIGNED;
DECLARE choosen_tree INTEGER UNSIGNED;
START TRANSACTION;
SELECT tree_id,rgt
INTO choosen_tree,lft_sibling
FROM GENERIC
WHERE id = sibling_id;
IF ISNULL(lft_sibling) THEN
BEGIN
SELECT Baobab_getErrCode('NODE_DOES_NOT_EXIST') INTO error_code;
LEAVE main;
END;
END IF;
UPDATE GENERIC
SET lft = CASE WHEN lft < lft_sibling
THEN lft
ELSE lft + 2 END,
rgt = CASE WHEN rgt < lft_sibling
THEN rgt
ELSE rgt + 2 END
WHERE tree_id=choosen_tree AND rgt > lft_sibling;
INSERT INTO GENERIC(tree_id,id,lft,rgt)
VALUES (choosen_tree,NULL, (lft_sibling + 1),(lft_sibling + 2));
SELECT LAST_INSERT_ID() INTO new_id;
COMMIT;
END;
END IF;
END;
/* ################################ */
/* ###### INSERT NODE BEFORE ###### */
/* ################################ */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_insertBefore;
CREATE PROCEDURE Baobab_GENERIC_insertBefore(
IN sibling_id INTEGER UNSIGNED,
OUT new_id INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
IF 1 = (SELECT lft FROM GENERIC WHERE id = sibling_id) THEN
BEGIN
SELECT Baobab_getErrCode('ROOT_ERROR') INTO error_code;
LEAVE main;
END;
ELSE
BEGIN
DECLARE rgt_sibling INTEGER UNSIGNED;
DECLARE choosen_tree INTEGER UNSIGNED;
START TRANSACTION;
SELECT tree_id,lft
INTO choosen_tree,rgt_sibling
FROM GENERIC
WHERE id = sibling_id;
IF ISNULL(rgt_sibling) THEN
BEGIN
SELECT Baobab_getErrCode('NODE_DOES_NOT_EXIST') INTO error_code;
LEAVE main;
END;
END IF;
UPDATE IGNORE GENERIC
SET lft = CASE WHEN lft < rgt_sibling
THEN lft
ELSE lft + 2 END,
rgt = CASE WHEN rgt < rgt_sibling
THEN rgt
ELSE rgt + 2 END
WHERE tree_id=choosen_tree AND rgt >= rgt_sibling
ORDER BY lft DESC; /* order by is meant to avoid uniqueness violation on update */
INSERT INTO GENERIC(tree_id,id,lft,rgt)
VALUES (choosen_tree,NULL, rgt_sibling, rgt_sibling + 1);
SELECT LAST_INSERT_ID() INTO new_id;
COMMIT;
END;
END IF;
END;
/* ################################### */
/* ###### INSERT CHILD AT INDEX ###### */
/* ################################### */
/* Add a new child to parent 'parent_id' at index 'index'.
index is the new child position, 0 will put the new node as first.
index can be negative, where -1 will put the new node before the last one
*/
DROP PROCEDURE IF EXISTS Baobab_GENERIC_InsertChildAtIndex;
CREATE PROCEDURE Baobab_GENERIC_InsertChildAtIndex(
IN parent_id INTEGER UNSIGNED,
IN idx INTEGER,
OUT new_id INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
BEGIN
DECLARE nth_child INTEGER UNSIGNED;
DECLARE cur_tree_id INTEGER UNSIGNED;
SET error_code=0;
SET new_id=0;
CALL Baobab_GENERIC_getNthChild(parent_id,idx,nth_child,error_code);
IF NOT error_code THEN
CALL Baobab_GENERIC_insertBefore(nth_child,new_id,error_code);
ELSE IF idx = 0 AND error_code = (SELECT Baobab_getErrCode('INDEX_OUT_OF_RANGE')) THEN
BEGIN
SET error_code = 0;
CALL Baobab_GENERIC_AppendChild((SELECT tree_id FROM GENERIC WHERE id = parent_id),
parent_id,
new_id,
cur_tree_id);
END;
END IF;
END IF;
END;
/* ########################### */
/* ###### GET NTH CHILD ###### */
/* ########################### */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_getNthChild;
CREATE PROCEDURE Baobab_GENERIC_getNthChild(
IN parent_id INTEGER UNSIGNED,
IN idx INTEGER,
OUT nth_child INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
DECLARE num_children INTEGER;
SET error_code=0;
SELECT COUNT(*)
INTO num_children
FROM GENERIC_AdjTree WHERE parent = parent_id;
IF num_children = 0 OR IF(idx<0,(-idx)-1,idx) >= num_children THEN
/* idx is out of range */
BEGIN
SELECT Baobab_getErrCode('INDEX_OUT_OF_RANGE') INTO error_code;
LEAVE main;
END;
ELSE
SELECT child
INTO nth_child
FROM GENERIC_AdjTree as t1
WHERE (SELECT count(*) FROM GENERIC_AdjTree as t2
WHERE parent = parent_id AND t2.lft<=t1.lft AND t1.tree_id=t2.tree_id
)
= (CASE
WHEN idx >= 0
THEN idx+1
ELSE num_children+1+idx
END
)
LIMIT 1;
END IF;
END;
/* ###################################### */
/* ###### MOVE SUBTREE BEFORE NODE ###### */
/* ###################################### */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_MoveSubtreeBefore;
CREATE PROCEDURE Baobab_GENERIC_MoveSubtreeBefore(
IN node_id_to_move INTEGER UNSIGNED,
IN reference_node INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
DECLARE node_revised INTEGER UNSIGNED;
DECLARE move_as_first_sibling BOOLEAN;
DECLARE ref_left INTEGER UNSIGNED;
DECLARE ref_node_tree INTEGER UNSIGNED;
SET error_code=0; /* 0 means no error */
SET move_as_first_sibling = TRUE;
SELECT tree_id,lft
INTO ref_node_tree,ref_left
FROM GENERIC WHERE id = reference_node;
IF ref_left = 1 THEN
BEGIN
/* cannot move a parent node before or after root */
SELECT Baobab_getErrCode('ROOT_ERROR') INTO error_code;
LEAVE main;
END;
END IF;
/* if reference_node is the first child of his parent, set node_revised
to the parent id, else set node_revised to NULL */
SET node_revised = ( SELECT id FROM GENERIC WHERE tree_id=ref_node_tree AND lft = -1+ ref_left);
IF ISNULL(node_revised) THEN /* if node_revised is NULL we must find the previous sibling */
BEGIN
SET node_revised= (SELECT id FROM GENERIC
WHERE tree_id=ref_node_tree AND rgt = -1 + ref_left);
SET move_as_first_sibling = FALSE;
END;
END IF;
CALL Baobab_GENERIC_MoveSubtree_real(
node_id_to_move, node_revised , move_as_first_sibling, error_code
);
END;
/* ##################################### */
/* ###### MOVE SUBTREE AFTER NODE ###### */
/* ##################################### */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_MoveSubtreeAfter;
CREATE PROCEDURE Baobab_GENERIC_MoveSubtreeAfter(
IN node_id_to_move INTEGER UNSIGNED,
IN reference_node INTEGER UNSIGNED,
OUT error_code INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
BEGIN
SELECT 0 INTO error_code; /* 0 means no error */
CALL Baobab_GENERIC_MoveSubtree_real(
node_id_to_move,reference_node,FALSE,error_code
);
END;
/* ##################################### */
/* ####### MOVE SUBTREE AT INDEX ####### */
/* ##################################### */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_MoveSubtreeAtIndex;
CREATE PROCEDURE Baobab_GENERIC_MoveSubtreeAtIndex(
IN node_id_to_move INTEGER UNSIGNED,
IN parent_id INTEGER UNSIGNED,
IN idx INTEGER,
OUT error_code INTEGER)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
DECLARE nth_child INTEGER UNSIGNED;
DECLARE num_children INTEGER;
DECLARE parent_of_node_to_move INTEGER UNSIGNED;
DECLARE s_lft INTEGER UNSIGNED;
DECLARE current_idx INTEGER;
SET error_code=0;
SELECT COUNT(*)
INTO num_children
FROM GENERIC_AdjTree WHERE parent = parent_id;
IF idx < 0 THEN
SET idx = num_children + idx;
ELSEIF idx > 0 THEN BEGIN
SELECT parent, lft
INTO parent_of_node_to_move, s_lft
FROM GENERIC_AdjTree WHERE child = node_id_to_move;
IF parent_of_node_to_move = parent_id THEN BEGIN
SELECT count(*)
INTO current_idx
FROM GENERIC_AdjTree
WHERE parent = parent_id AND lft < s_lft;
IF idx > current_idx THEN
SET idx = idx + 1;
END IF;
END;
END IF;
END;
END IF;
SET idx = IF(idx<0,num_children+idx,idx);
IF idx = 0 THEN /* moving as first child, special case */
CALL Baobab_GENERIC_MoveSubtree_real(node_id_to_move,parent_id,TRUE,error_code);
ELSE
BEGIN
/* search the node before idx, and we wil move our node after that */
CALL Baobab_GENERIC_getNthChild(parent_id,idx-1,nth_child,error_code);
IF NOT error_code THEN
CALL Baobab_GENERIC_MoveSubtree_real(node_id_to_move,nth_child,FALSE,error_code);
END IF;
END;
END IF;
END;
/* ####################################### */
/* ####### MOVE SUBTREE REAL LOGIC #######*/
/* ####################################### */
/* If move_as_first_sibling is FALSE, move node_id_to_move after reference_node,
else reference_node is the new father of node_id_to_move */
SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_UNSIGNED_SUBTRACTION';
DROP PROCEDURE IF EXISTS Baobab_GENERIC_MoveSubtree_real;
CREATE PROCEDURE Baobab_GENERIC_MoveSubtree_real(
IN node_id_to_move INTEGER UNSIGNED,
IN reference_node INTEGER UNSIGNED,
IN move_as_first_sibling BOOLEAN,
OUT error_code INTEGER
)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
DECLARE s_lft INTEGER UNSIGNED;
DECLARE s_rgt INTEGER UNSIGNED;
DECLARE ref_lft INTEGER UNSIGNED;
DECLARE ref_rgt INTEGER UNSIGNED;
DECLARE source_node_tree INTEGER UNSIGNED;
DECLARE ref_node_tree INTEGER UNSIGNED;
DECLARE diff_when_inside_sourcetree BIGINT SIGNED;
DECLARE diff_when_next_sourcetree BIGINT SIGNED;
DECLARE ext_bound_1 INTEGER UNSIGNED;
DECLARE ext_bound_2 INTEGER UNSIGNED;
SET error_code=0;
START TRANSACTION;
/* select tree, left and right of the node to move */
SELECT tree_id,lft, rgt
INTO source_node_tree, s_lft, s_rgt
FROM GENERIC
WHERE id = node_id_to_move;
/* select left and right of the reference node
If moving as first sibling, ref_lft will become the new lft value of node_id_to_move,
(and ref_rgt is unused), else we're saving left and right value of soon to be
previous sibling
*/
SELECT tree_id, IF(move_as_first_sibling,lft+1,lft), rgt
INTO ref_node_tree, ref_lft, ref_rgt
FROM GENERIC
WHERE id = reference_node;
IF move_as_first_sibling = TRUE THEN
IF s_lft <= ref_lft AND s_rgt >= ref_rgt AND source_node_tree=ref_node_tree THEN
/* cannot move a parent node inside his own subtree */
BEGIN
SELECT Baobab_getErrCode('CHILD_OF_YOURSELF_ERROR') INTO error_code;
LEAVE main;
END;
ELSE
IF s_lft > ref_lft THEN BEGIN
SET diff_when_inside_sourcetree = -(s_lft-ref_lft);
SET diff_when_next_sourcetree = s_rgt-s_lft+1;
SET ext_bound_1 = ref_lft;
SET ext_bound_2 = s_lft-1;
END;
ELSEIF s_lft = ref_lft and source_node_tree = ref_node_tree THEN BEGIN
/* we have been asked to move a node to his same position */
LEAVE main;
END;
ELSE BEGIN
SET diff_when_inside_sourcetree = ref_lft-s_rgt-1;
SET diff_when_next_sourcetree = -(s_rgt-s_lft+1);
SET ext_bound_1 = s_rgt+1;
SET ext_bound_2 = ref_lft-1;
END;
END IF;
END IF;
ELSE /* moving after an existing child */
IF ref_lft = 1 THEN /* cannot move a node before or after root */
BEGIN
SELECT Baobab_getErrCode('ROOT_ERROR') INTO error_code;
LEAVE main;
END;
ELSEIF s_lft < ref_lft AND s_rgt > ref_rgt AND source_node_tree=ref_node_tree THEN
/* cannot move a parent node inside his own subtree */
BEGIN
SELECT Baobab_getErrCode('CHILD_OF_YOURSELF_ERROR') INTO error_code;
LEAVE main;
END;
ELSE
IF s_lft > ref_rgt THEN BEGIN
SET diff_when_inside_sourcetree = -(s_lft-ref_rgt-1);
SET diff_when_next_sourcetree = s_rgt-s_lft+1;
SET ext_bound_1 = ref_rgt+1;
SET ext_bound_2 = s_lft-1;
END;
ELSE BEGIN
SET diff_when_inside_sourcetree = ref_rgt-s_rgt;
SET diff_when_next_sourcetree = -(s_rgt-s_lft+1);
SET ext_bound_1 = s_rgt+1;
SET ext_bound_2 = ref_rgt;
END;
END IF;
END IF;
END IF;
IF source_node_tree <> ref_node_tree THEN
BEGIN
CALL Baobab_GENERIC_MoveSubtree_Different_Trees(
node_id_to_move,reference_node,move_as_first_sibling);
LEAVE main;
END;
END IF;
UPDATE GENERIC
SET lft =
lft + CASE
WHEN lft BETWEEN s_lft AND s_rgt
THEN diff_when_inside_sourcetree
WHEN lft BETWEEN ext_bound_1 AND ext_bound_2
THEN diff_when_next_sourcetree
ELSE 0 END
,
rgt =
rgt + CASE
WHEN rgt BETWEEN s_lft AND s_rgt
THEN diff_when_inside_sourcetree
WHEN rgt BETWEEN ext_bound_1 AND ext_bound_2
THEN diff_when_next_sourcetree
ELSE 0 END
WHERE tree_id=source_node_tree;
COMMIT;
END;
SET sql_mode=@OLD_SQL_MODE;
DROP PROCEDURE IF EXISTS Baobab_GENERIC_MoveSubtree_Different_Trees;
CREATE PROCEDURE Baobab_GENERIC_MoveSubtree_Different_Trees(
IN node_id_to_move INTEGER UNSIGNED,
IN reference_node INTEGER UNSIGNED,
IN move_as_first_sibling BOOLEAN
)
LANGUAGE SQL
DETERMINISTIC
main:BEGIN
DECLARE s_lft INTEGER UNSIGNED;
DECLARE s_rgt INTEGER UNSIGNED;
DECLARE ref_lft INTEGER UNSIGNED;
DECLARE ref_rgt INTEGER UNSIGNED;
DECLARE source_node_tree INTEGER UNSIGNED;
DECLARE ref_node_tree INTEGER UNSIGNED;
START TRANSACTION;
/* select tree, left and right of the node to move */
SELECT tree_id,lft, rgt
INTO source_node_tree, s_lft, s_rgt
FROM GENERIC
WHERE id = node_id_to_move;
/* The current select will behave differently whether we're moving
the node as first sibling or not.
If move_as_first_sibling,
ref_lft will have the value of the "lft" field of node_id_to_move at end
of move (ref_rgt here is discarded)
else
ref_lft and ref_rgt will have the values of the node before node_id_to_move
at end of move
*/
SELECT tree_id, IF(move_as_first_sibling,lft+1,lft), rgt
INTO ref_node_tree, ref_lft, ref_rgt
FROM GENERIC
WHERE id = reference_node;
IF (move_as_first_sibling) THEN BEGIN
/* create a gap in the destination tree to hold the subtree */
UPDATE GENERIC
SET lft = CASE WHEN lft < ref_lft
THEN lft
ELSE lft + s_rgt-s_lft+1 END,
rgt = CASE WHEN rgt < ref_lft
THEN rgt
ELSE rgt + s_rgt-s_lft+1 END
WHERE tree_id=ref_node_tree AND rgt >= ref_lft;
/* move the subtree to the new tree */
UPDATE GENERIC
SET lft = ref_lft + (lft-s_lft),
rgt = ref_lft + (rgt-s_lft),
tree_id = ref_node_tree
WHERE tree_id = source_node_tree AND lft >= s_lft AND rgt <= s_rgt;
END;
ELSE BEGIN
/* create a gap in the destination tree to hold the subtree */
UPDATE GENERIC
SET lft = CASE WHEN lft < ref_rgt
THEN lft
ELSE lft + s_rgt-s_lft+1 END,
rgt = CASE WHEN rgt <= ref_rgt
THEN rgt
ELSE rgt + s_rgt-s_lft+1 END
WHERE tree_id=ref_node_tree AND rgt > ref_rgt;
/* move the subtree to the new tree */
UPDATE GENERIC
SET lft = ref_rgt+1 + (lft-s_lft),
rgt = ref_rgt+1 + (rgt-s_lft),
tree_id = ref_node_tree
WHERE tree_id = source_node_tree AND lft >= s_lft AND rgt <= s_rgt;
END;
END IF;
/* close the gap in the source tree */
CALL Baobab_GENERIC_Close_Gaps(source_node_tree);
COMMIT;
END;
/* ########################## */
/* ####### CLOSE GAPS ####### */
/* ########################## */
DROP PROCEDURE IF EXISTS Baobab_GENERIC_Close_Gaps;
CREATE PROCEDURE Baobab_GENERIC_Close_Gaps(
IN choosen_tree INTEGER UNSIGNED)
LANGUAGE SQL
DETERMINISTIC
BEGIN
UPDATE GENERIC
SET lft = (SELECT COUNT(*)
FROM (
SELECT lft as seq_nbr FROM GENERIC WHERE tree_id=choosen_tree
UNION ALL
SELECT rgt FROM GENERIC WHERE tree_id=choosen_tree
) AS LftRgt
WHERE tree_id=choosen_tree AND seq_nbr <= lft
),
rgt = (SELECT COUNT(*)
FROM (
SELECT lft as seq_nbr FROM GENERIC WHERE tree_id=choosen_tree
UNION ALL
SELECT rgt FROM GENERIC WHERE tree_id=choosen_tree
) AS LftRgt
WHERE tree_id=choosen_tree AND seq_nbr <= rgt
)
WHERE tree_id=choosen_tree;
END
hello. i got this error and i have no idea why or what is going on. could someone explain in layman's term please and help me out.
Fatal error: Uncaught exception 'PDOException' with message 'SQLSTATE[23000]: Integrity constraint violation: 1048 Column 'event_id' cannot be null' in /home/dhsbnet/public_html/ems/add_guest.php:36 Stack trace: #0 /home/dhsbnet/public_html/ems/add_guest.php(36): PDOStatement->execute() #1 {main} thrown in /home/dhsbnet/public_html/ems/add_guest.php on line 36
code being referred to, line 36 is $guests->execute() :
if(isset($_SESSION['sess_user_id']))
{
if(isset($_POST['save']))
{
require "connection.php";
$name = $_POST['guest-name'];
$event = $_POST['event'];
$session = $_SESSION['sess_user_id'];
$status = "";
$status .= "0";
$guests = $dbh->prepare("INSERT INTO guest(guser_id,guest_name,event_id,status) VALUES (?,?,?,?)");
for($i = 0; $i < count($_POST['guest-name']); $i++)
{
if(trim($_POST['guest-name'][$i]) !== '')
{
$guests->bindParam(1, $session, PDO::PARAM_INT);
$guests->bindParam(2, $name[$i], PDO::PARAM_STR);
$guests->bindParam(3, $event, PDO::PARAM_INT);
$guests->bindParam(4, $status, PDO::PARAM_INT);
$guests->execute();
if($guests->rowCount() > 0)
{
echo "<script>window.location.href = 'guest_list.php';</script>";
}
}
}
}
}
<div class="dropdown">
<label>Event : <label/>
<select name="event" id="dd-event" required>
<option value="0" selected>Event</option>
<?php foreach($retrieve as $r): ?>
<option value="<?=$r['event_id']?>"><?=$r['event_name']?></option>
<?php endforeach ?>
</select>
</div>
in db event_id column is int, not null, not auto incremented. TIA!
help - can you tell me why this is giving the following error
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DROP TABLE IF EXISTS `admin`' at line 8
i am trying to import a data file ... first few lines of which are
-- MySQL dump 10.10 -- -- Host: localhost Database: bromleyone -- ------------------------------------------------------ -- Server version 5.0.22-Debian_0ubuntu6.06.10-log /*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */; /*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */; /*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */; /*!40101 SET NAMES utf8 */; /*!40103 SET @OLD_TIME_ZONE=@@TIME_ZONE */; /*!40103 SET TIME_ZONE='+00:00' */; /*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0 */; /*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */; /*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */; /*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */; use bromleyone -- -- Table structure for table `admin` -- DROP TABLE IF EXISTS `admin`; CREATE TABLE `admin` ( `id` int(11) NOT NULL auto_increment, `username` varchar(30) NOT NULL default '', `password` varchar(30) NOT NULL default '', `name` varchar(40) NOT NULL default '', PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1; I'm getting the err msg Error . "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '$sqry' at line 1 " while executing query from php5.3.5 but its working directly in mysql5.5.8 Help? I’ve just read several manual pages and forum comments on "Error number 1064" but I still don’t understand what’s going on with the problem I'm having now … Also, I'm surprised that the error message mentions two different line numbers (1 and 35). Here is the error message I get : And here are the contents of my "one_more_visit_to_topic.php" file :
<?php
include("includes/model/database_searches/see_readings.php");
include("includes/model/database_searches/see_watchings.php");
function one_more_visit_to_topic($user_id,$topic_id)
{
global $db;
$request_string='UPDATE forum_topic '.
'SET topic_vu = topic_vu + 1 WHERE topic_id = :topic';
$query=$db->prepare($request_string);
$query->bindValue(':topic',$topic_id,PDO::PARAM_INT);
$query->execute();
$query->CloseCursor();
// Remember that topic has been read by user
if(!(see_if_user_has_read_topic($user_id,$topic_id))) {
$request_string='INSERT INTO forum_read (fr_topic_id,fr_user_id) '.
'VALUES (:topic,:user)';
$query=$db->prepare($request_string);
$query->bindValue(':topic',$topic_id,PDO::PARAM_INT);
$query->bindValue(':user',$user_id,PDO::PARAM_INT);
$query->execute();
$query->CloseCursor();
}
// If user has already received a warning by mail,
// the "alert" value needs to be toggled in the fw_watch table
if(see_if_user_has_been_warned($user_id,$topic_id)) {
$request_string='UPDATE forum_read SET fw_alert = :alt '.
'WHERE fw_topic_id = :topic AND fw_user_id= :user)';
$query=$db->prepare($request_string);
$query->bindValue(':topic',$topic_id,PDO::PARAM_INT);
$query->bindValue(':user',$user_id,PDO::PARAM_INT);
$one=(int)1;
$query->bindValue(':alt',$one,PDO::PARAM_INT);
$query->execute();
$query->CloseCursor();
}
return;
}
?>
Code: [Select] <?php mysql_connect ("-","-","-") or die ('Error'); mysql_select_db ("-"); $out = mysql_query("SELECT * FROM guestbook ORDER BY id DESC"); while($row = mysql_fetch_assoc($out); --and this one if that braces is deleted { ----this is where im getting the error $name = $row['name']; $email = $row['email']; $txt = $row['comment']; $msg = "Are you sure you want to delete"; /* @var $_REQUEST <type> */ if (isset($_REQUEST ["action"]) && $_REQUEST["action"] == "del") { $id = intval($_REQUEST['id']); mysql_query("DELETE FROM guestbook WHERE id=$id;"); echo "<action=index.php>"; } echo "<font face='verdana' size='1'>"; echo "<table border='0'> <tr><td>Name: ".$name."</td></tr>"." <tr><td>Email: ".$email."</td></tr> <tr><td colspan='2'>Comment:</td></tr> <tr><td colspan='2' width='500'><b>".$txt."</b></td></tr> <tr><td><a onclick=\"return confirm('.$msg.');\" href='index.php?action=del&id=".$row['id']."'><span class='red'>["."Delete"."]</span></a> </td></tr> </table><br />"; echo "<hr size='1' width='500' align='left'></font>"; } ?> Kindly help me please. When i delete ({) the error will become the ( i dont know what to do already. Thanks. I don`t get it, waht is wrong?! Code: [Select] <?php require_once 'auth.php'; if (!isset($_SESSION['SESS_VERIFY'])) { header("location: access-denied.php"); exit(); } if ($_SESSION['lang'] == 'Ro') { // setare data romania date_default_timezone_set('Europe/Bucharest'); $today = getdate(); $zi = $today['mday']; $luna = $today['mon']; $lunastring = $today['month']; $an = $today['year']; $data = $zi.$luna.$an; $data = (string)$data; $ora = date('H:i:s'); $msg = array(); $err = array(); $luni = array ( 1=>'Ianuarie', 2=>'Februarie', 3=>'Martie', 4=>'Aprilie', 5=>'Mai', 6=>'Iunie', 7=>'Iulie', 8=>'August', 9=>'Septembrie', 10=>'Octobrie', 11=>'Noiembrie', 12=>'Decembrie'); // comun const SQL_ERR = 'SQL statement failed with error: '; const ADD_MODEL = 'ADAUGA UN MODEL NOU'; . .many constants.. . } elseif ($_SESSION['lang'] == 'It') {... Thank you! I have been trying to get my files to upload onto a computer and I receive this message: Parse error: syntax error, unexpected T_STRING in /home/content/19/6550319/html/listing.php on line 27. Line 27 is how the php logs into my SQL. The problem is that I was able to log in before. I just made changes to the form by adding a dropdown menu and price and now it says it doesnt parse. Can anyone figure this out. I will include the code without the login information because the forum is public but I did put the words left out for you to see where I took out the passcodes. Code: [Select] <?php //This is the directory where images will be saved $target = "potofiles/"; $target = $target . basename( $_FILES['photo']['name']); //This gets all the other information from the form $price=$_POST['price']; $gig=$_POST['giga']; $yesg=$_POST['yesg']; $pic=($_FILES['photo']['name']); $pic2=($_FILES['phototwo']['name']); $pic3=($_FILES['photothree']['name']); $pic4=($_FILES['photofour']['name']); $description=$_POST['iPadDescription']; $condition=$_POST['condition']; $fname=$_POST['firstName']; $lname=$_POST['lastName']; $email=$_POST['email'] // Connects to your Database mysql_connect ("left out", "left out", "left out") or die(mysql_error()) ; mysql_select_db("left out") or die(mysql_error()) ; //Writes the information to the database mysql_query("INSERT INTO listing (price,giga,yesg,photo,phototwo,photothree,photofour,iPadDescription,condition,firstName,lastName,email) VALUES ('$price', '$gig', '$yesg', '$pic', '$pic2', '$pic3', '$pic4', '$description', '$condition', '$fname', '$lname', '$email')") ; //Writes the photo to the server if(move_uploaded_file($_FILES['photo']['tmp_name'], $target)) { //Tells you if its all ok echo "The file ". basename( $_FILES['uploadedfile']['name']). " has been uploaded, and your information has been added to the directory"; } else { //Gives and error if its not echo "Sorry, there was a problem uploading your file."; } echo date("m/d/y : H:i:s", time()) ?>
Hello everyone,
1 <?php
7 // Create connection
10 // Check connection
14 $firstname = $conn->real_escape_string($_REQUEST['firstname']); 25 $sql2 = "INSERT INTO countries VALUES ('$country')"; 27 $sql3 = "INSERT INTO Contacts (firstname, lastname, address, city, country, phone, email) VALUES ('$firstname', '$lastname', '$address', $city, $country, '$phone_number','$email')";
29 SELECT * FROM cities;
if($conn->query($sql2) === true){
if($conn->query($sql3) === true){ Hi folks, I am a complete n00b at php and mysql. I am teaching myself from books and the WWW, but alas I am stuck... the error I get is: Parse error: syntax error, unexpected T_STRING in X:\xampp\htdocs\search.php on line 7 here is the code: <?php mysql_connect ("localhost", "user", "password") or die (mysql_error()); mysql_select_db ("it_homehelp_test") or die (mysql_error()); $term = $_POST['term']; $sql = $mysql_query(select * from it_homehelp_test where ClientName1 like '%term%'); <<<------this is line 7 while ($row = mysql_fetch_array($sql)){ echo 'Client Name:' .$row['ClientName1']; echo 'Address:' .$row['Address1']; echo 'Phone:' .$row['Tel1']; } ?> Any help you can offer would be great. I can also post the ".html" file that creates the search bar if it is needed. Thanks I just enabled error reporting and I am not that familiar with it. I know I have an error some where around line 33. I know I am missing a bracket or a comma or some other syntax error I just cannot find where the error is. Below is my script. Thanks for any help. Code: [Select] <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Airline Survey</title> <meta http-equiv="content-type" content="text/html; charset=iso-8859-1" /> <meta name="author" content="Revised by abc1234"/> </head> <body> <?php $WaitTime = addslashes($_POST["wait_time"]); $Friendliness = addslashes($_POST["friendliness"]); $Space = addslashes($_POST["space"]); $Comfort = addslashes($_POST["comfort"]); $Cleanliness = addslashes($_POST["cleanliness"]); $Noise = addslashes($_POST["noise"]); if (empty($WaitTime) || empty($Friendliness) || empty($Space) || empty($Comfort) || empty($Cleanliness) || empty($Noise)) echo "<hr /><p>You must enter a value in each field. Click your browser's Back button to return to the form.</p><hr />"; else { $Entry = $WaitTime . "\n"; $Entry .= $Friendliness . "\n"; $Entry .= $Space . "\n"; $Entry .= $Comfort . "\n"; $Entry .= $Cleanliness . "\n"; $Entry .= $Noise . "\n"; $SurveyFile = fopen("survey.txt", "w") } if (flock($SurveyFile, LOCK_EX)) { if (fwrite($SurveyFile, $Entry) > 0) { echo "<p>The entry has been successfully added.</p>"; flock($SurveyFile, LOCK_UN; fclose($SurveyFile); else echo "<p>The entry could not be saved!</p>"; } else echo "<p>The entry could not be saved!</p>"; } ?d> <p><a href="AirlineSurvey.html">Return to Airline Survey</a></p> </body> </html> Hey, I just started using WordPress - I'm a complete newbie, and am super perplexed by this error I'm getting in functions.php. I'm hoping I am just making a simple mistake, but I'd really appreciate some suggestions as to what the issue is. The error: Parse error: syntax error, unexpected T_VARIABLE in /homepages/33/d123623052/htdocs/rap3/wp-content/themes/business-turnkey/functions.php on line 196 That line would be at the very bottom of my code. From what I can tell, this error occurs when the code is missing a punctuation mark like a [ ( { , ' etc. I've been looking over the code for ages, and from what I can see all the brackets have a matching end, there's no out of place punctuation.
<?php
define('THEME_URI', get_stylesheet_directory_uri());
define('THEME_IMAGES', THEME_URI . '/assets/img');
define('THEME_CSS', THEME_URI . '/assets/css');
define('THEME_JS', THEME_URI . '/assets/js');
define('THEME_TEMPLATES', THEME_URI . '/assets/templates');
$GLOBALS['content_width'] = 900;
/* Define Theme Defaults */
$options = get_option('turnkey_theme_options');
if($options['templatestyle'] == null)
$options['templatestyle'] = 'modern';
if($options['typography'] == null)
$options['typography'] = 'typography1';
function turnkeySlider() {
$options = get_option('turnkey_theme_options');
if($options['sliderTimer'] != null)
$rotateTimer = $options['sliderTimer'];
else
$rotateTimer = 5000;
?>
<script type="text/javascript" charset="utf-8">
jQuery(document).ready(function($) {
$('.slide-container').cycle({ fx: 'scrollHorz',next: '#slide-nav .next',prev: '#slide-nav .prev',pause: 1, timeout:<?php echo $rotateTimer; ?>});
});
</script>
<?php
}
add_action('wp_head', 'turnkeySlider');
require_once ( get_stylesheet_directory() . '/theme-options.php' );
require_once ( 'slider/turnkey-slider.php' );
if (function_exists('register_sidebar')) {
register_sidebar(array(
'name'=> 'Homepage Widgets',
'id' => 'homepage_widgets',
'before_widget' => '<div class="widget group %2$s">',
'after_widget' => '</div>',
'before_title' => '<h3>',
'after_title' => '</h3>'
));
register_sidebar(array(
'name'=> 'Sidebar 1',
'id' => 'sidebar_1',
'before_widget' => '<div class="widget group %2$s">',
'after_widget' => '</div>',
'before_title' => '<h4>',
'after_title' => '</h4>'
));
register_sidebar(array(
'name'=> 'Sidebar 2',
'id' => 'sidebar_2',
'before_widget' => '<div class="widget group %2$s">',
'after_widget' => '</div>',
'before_title' => '<h4>',
'after_title' => '</h4>'
));
register_sidebar(array(
'name'=> 'Footer Widgets',
'id' => 'footer-widgets',
'before_widget' => '<div class="widget group %2$s">',
'after_widget' => '</div>',
'before_title' => '<h3>',
'after_title' => '</h3>'
));
}
if ( function_exists( 'register_nav_menus' ) ) {
register_nav_menus(
array(
'turnkey_mainnav' => 'TurnKey Main Navigation',
'turnkey_secondary' => 'TurnKey Secondary Navigation'
)
);
};
add_theme_support( 'post-thumbnails' );
// Makes Sure thumbnails show up in RSS
function do_post_thumbnail_feeds($content) {
global $post;
if(has_post_thumbnail($post->ID)) {
$content = '<div>' . get_the_post_thumbnail($post->ID) . '</div>' . $content;
}
return $content;
}
add_filter('the_excerpt_rss', 'do_post_thumbnail_feeds');
add_filter('the_content_feed', 'do_post_thumbnail_feeds');
// Define Thumbnail Images Sizes
if ( function_exists( 'add_image_size' ) ) {
add_image_size( 'post-thumb-threecol', 390, 200, true );
add_image_size( 'post-thumb-onetwocol', 520, 200, true );
/* Slide Image */ add_image_size( 'special', 580, 340, true );
}
if ( !is_admin() ) { // instruction to only load if it is not the admin area
function googlejquery() {
wp_deregister_script( 'jquery' );
wp_register_script( 'jquery', 'http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js');
}
add_action('init', 'googlejquery');
wp_register_script('functions',
get_bloginfo('template_directory') . '/assets/js/functions.js');
wp_register_script('cycle',
get_bloginfo('template_directory') . '/assets/js/cycle.min.js');
wp_register_script('lightbox',
get_bloginfo('template_directory') . '/assets/js/lightbox_me.js');
// enqueue the script
wp_enqueue_script('jquery');
wp_enqueue_script('functions');
wp_enqueue_script('cycle');
wp_enqueue_script('lightbox');
};
function the_breadcrumb() {
if (!is_home()) {
echo '<a href="';
echo get_option('home');
echo '">';
bloginfo('name');
echo "</a> » ";
if (is_category() || is_single()) {
the_category('title_li=');
if (is_single()) {
echo " » ";
the_title();
}
} elseif (is_page()) {
echo " <span class='current'> ";
echo the_title();
echo " </span> ";
}
}
}
function rap_register_sidebars() {
register_sidebar(array(
'name' => 'Scheduling campaign sidebar',
'id' => 'rap-scheduling-sidebar',
'description' => 'Sidebar for Scheduling Campaign template pages only.',
'before_widget' => '<div class="widget">',
'after_widget' => '</div>',
'before_title' => '<h2 class="widget-title">',
'after_title' => '</h2>'
));
}
// Add Automatic Feed Links
add_theme_support('automatic-feed-links');
add_filter('widget_text', 'do_shortcode');
add_action('widgets_init', 'rap_register_sidebars');
// Below added by Jessica 6/24/13 to display Salesforce lookup fields on Gravity Forms field mapping page
add_filter('gf_salesforce_skip_reference_types', '__return_false');
// Below added by Jessica to change the field value on the Join Us and Training forms
add_action("gform_pre_submission_1", "pre_submission_JoinUs");
add_action("gform_pre_submission_8", "pre_submission_Training");
add_action("gform_pre_submission_15", "pre_submission_HCAP");
function pre_submission_JoinUs($form){
if ($_POST["input_15"] == 'Former Retail Worker') $_POST["input_15"] = 'Retail Worker';
}
function pre_submission_Training($form){
if ($_POST["input_18"] == 'Former Retail Worker') $_POST["input_18"] = 'Retail Worker';
}
function pre_submission_HCAP($form){
if ($_POST["input_15"] == 'Former Retail Worker') $_POST["input_15"] = 'Retail Worker';
}
?>
Edited by motprogram, 11 December 2014 - 04:33 PM.
<?php
error_reporting(E_ALL);
include_once("conninfo2.php");
include_once('classes/bcrypt.php');
class User
{
private $_bcrypt;
$this->_bcrypt = new Bcrypt;
if($this->_bcrypt->verify($password, $this->data()->password)){
}
if(isset($_POST['username'])) {
$firstname = strip_tags($_POST['firstname']);
$surname = strip_tags($_POST['surname']);
$pnumber = strip_tags($_POST['pnumber']);
$username = strip_tags($_POST['username']);
$email1 = strip_tags($_POST['email1']);
$email2 = strip_tags($_POST['email2']);
$password1 = $_POST['password1'];
$password2 = $_POST['password2'];
//code below will make sure all fields are filled in
if(trim($firstname) == "" || trim($surname) == "" || trim($pnumber) == "" || trim($username) == "username" || trim($email1) == "" || trim($email2) == "" ||trim($password1) == "" || trim($password2) == "") {
echo "Error, all fileds need to be filled in";
$db = null;
exit();
}
//code below checks that the emails entered both match one another
if($email1 != $email2) {
echo "Emails do not match, please try again";
$db = null;
exit();
}
//code below matches the passwords entered
else if($password1 != $password2) {
echo "Passwords do not match please try again";
exit();
}
if(!filter_var($email1, FILTER_VALIDATE_EMAIL)) {
echo "Your email is invalid, please try again";
$db = null;
exit();
}
//checks if the email exists within the database
$stmt = $db->prepare("SELECT email FROM login WHERE email=:email1 LIMIT 1");
$stmt->bindValue(':email1',$email1, PDO::PARAM_STR);
try{
$stmt->execute();
$count = $stmt->rowCount();
}
catch(PDOException $e) {
echo $e->getMessage();
$db = null;
exit();
}
//checks if the username exists
$usernameSQL = $db->prepare("SELECT username FROM login WHERE username=:username LIMIT 1");
$usernameSQL->bindValue(':username',$username,PDO::PARAM_STR);
try{
$usernameSQL->execute();
$usernameCount = $usernameSQL->rowCount();
}
catch(PDOExemption $e) {
echo $e->getMessage();
$db = null;
exit();
}
//checks if the email is already within the database
if($count > 0) {
echo "This email already exists";
$db = null;
exit();
}
//checks the username
if($usernameCount > 0) {
echo "This username is unavailable please try another";
$db = null;
exit();
}
$user = new User;
$bcrypt = new Bcrypt;
try {
$email1->create(array(
'username' => Input::get('username'),
'password1' => $bcrypt->hash(Input::get('password')),
'firstname' => Input::get('name'),
'surname' => Input::get('surname'),
'pnumber' => Input::get('pnumber'),
'email1' => Input::get('email'),
'ipaddress' => Input::get('ipaddress'),
'signup_date' => date('Y-m-d H:i:s'),
'group' => 1
));
//grab the last id used within the database
$lastId = $db->lastInsertId();
$stmt3 = $db->prepare("INSERT INTO activated (user, token) VALUES ('$lastId', :token)");
$stmt3->bindValue(':token',$token,PDO::PARAM_STR);
$stmt3->execute();
//email activation
$from = "From Auto Responder @ Mediaedit <admin@mediaedit.com>";
$subject = "IMPORTANT: Please activate your account";
$link = 'http://mediaed.it/roxanne/activate.php?user='.$lastId.'&token='.$token.'';
//email body
$message = "
Thanks for register with Mediaedit, before your able to use our services you will need to verify your email so that we know your human
$link
";
//headers
$headers = 'MIME-Version: 1.0' . "rn";
$headers .= "Content-type: textrn";
$headers .= "From: Mediaedit";
//send email now
mail($email1, $subject, $message, $headers, '-f noreply@mediated.it');
$db->commit();
echo "Thanks for registering, before you can us our services you need to activate your account an email has been sent which you will recieve shortly";
$db = null;
exit();
}
catch(PDOException $e){
$db->rollBack();
echo $e->getMessage();
$db = null;
exit();
}
}
?>
i keep getting Parse error: syntax error, unexpected T_VARIABLE, expecting T_FUNCTION
This topic has been moved to Third Party PHP Scripts. http://www.phpfreaks.com/forums/index.php?topic=315281.0 |
|||||||