|
PHP - Blocking The Access To Multiple Files With .htaccess?
I have around 14 script files for an admin page.
I am looking to block the access to 10 of them with .htaccess, so they can not get called up through the URL with the web browser, by for example guessing the name.
<Files index.php>
Order Allow,Deny
Allow from all
</Files>
How to set up, so I can have "those" 10 files in there?
Also, when comes to having an admin page and blocking the access to "those" script files is this the proper way to do it?
I would appreciate the suggestions a lot!
Edited by glassfish, 25 October 2014 - 11:06 AM. Similar Tutorialshi all i am using this below code in htaccess RewriteCond %{HTTP_REFERER} !^http://(.+\.)?domain\.com/ [NC]
RewriteCond %{HTTP_REFERER} !^$
RewriteRule .*\.(jpe?g|bmp|png|swf)$ /images/nohotlink.gif [L]
Also I am using colorbox script to show content in popup.I have some images in "images" folder inside "colorbox" folder on the root on local server (xampp) The above code in htaccess file is not showing "images" from this images folder that is inside colorbox folder on root on local server (xampp) If i comment those 3 lines in htaccess file then all images are shown fine on local server (xampp). How can i allow my htaccess file to show these images from inside colorbox folder on local server (xampp)?? Thanks Vineet This topic has been moved to Apache HTTP Server. http://www.phpfreaks.com/forums/index.php?topic=357293.0 Not sure if this is the right place for this, but I need to be able to run some PHP code before anything loads up on the server. Can PHP dynamically change .htaccess files? So I am working on my own PHP framework and I am using this:
php_value auto_prepend_file library/fw.php php_value auto_append_file library/fw.phpTo auto prepend and append file. In that file I have check if instance of core class located in fw.php is defined so it will not prepend and append duplicates. With this I reduced index.php code by these 2 lines // This should be at beggining of index php $fw = Base::getInstance(); // This should be at very end of index.php $fw->run();Is it good or bad way? I'm writing a script that opens a webpage and pulls out the pictures for editing. The problem I'm having is the pictures are protected from hotlinking with htaccess. The script is on a different domain. I know it's possible to do this but after much searching and experimentation I can't work it out. Any ideas? I have written a rule that if a file doesn't exist, then look for it in "sub1" folder, for example: when someone goes to www.example.com/file15 it will rewrite to -> www.example.com/sub1/file15, and it works
RewriteEngine On But there are more folders than sub1, so if a "file15" doesn't exist in sub1, then look for it in folder sub2, and if it's not in sub2, then rewrite to sub3. I tried this but doesn't work:
RewriteEngine On
I have some files saved outside the webroot and need to allow posts in WordPress to be able to access the files.
Following is the location of one of the files:
/home1/Mathone/TESTS/Test1/index1.html
I created a Download.php file with the following code and saved it to public_html of my site:
<?php $path = '/home1/Mathone/TESTS/'. $_GET['filename']; $mm_type="application/octet-stream"; header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0"); header("Cache-Control: public"); header("Content-Description: File Transfer"); header("Content-Type: " . $mm_type); header("Content-Length: " .(string)(filesize($path)) ); header('Content-Disposition: attachment; filename="'.basename($path).'"'); header("Content-Transfer-Encoding: binary\n"); readfile($path); // outputs the content of the file exit(); ?> Next, I created a post in wordpress with the following link: <a href="www.mysite.com/download.php?filename=Test1/index1.html">download</a> I am getting an error This is somewhat embarrassing, isn’t it? It seems we can’t find what you’re looking for. Perhaps searching can help. Can anyone tell me what I am doing wrong? Thank you Hi, I'm having a bit of a problem sharing some variables I have across a few files. My first file (index.php) calls an ajax request for (display.php) and sends a few variables to it. All fine so far. display.php then does its thing and displays the content on index.php as it should. Now in display.php I need a variable to be passed back to index.php for use in a menu. I've tried setting a session variable in display.php but unfortunately this doesn't seem to work. I also can't use get or post as I don't want to refresh the page. Really scratching my head over this one! Edd Hi Guys, I have a HTML form which posts to a PHP mail script page. This data then emails to the company email address. I have two file attachments on my form: CV and Photo ID How do I integrate my php mail script to upload and then email these TWO files as TWO attachements on the email? $fileatt_cv $fileatt_id I have tried a few methods that I found on Google but they dont work Code: [Select] <?php // Grab Data from Form if(isset($_POST['submit'])) { // Personal Information $surname = mysql_real_escape_string($_POST['surname']); $firstname = mysql_real_escape_string($_POST['firstname']); $telephone = mysql_real_escape_string($_POST['telephone']); $mobile = mysql_real_escape_string($_POST['mobile']); $email = mysql_real_escape_string($_POST['email']); $address = mysql_real_escape_string($_POST['address']); $postcodep1 = mysql_real_escape_string($_POST['postcodep1']); $postcodep2 = mysql_real_escape_string($_POST['postcodep2']); $dob_dd = mysql_real_escape_string($_POST['dob_dd']); $dob_mm = mysql_real_escape_string($_POST['dob_mm']); $dob_yyyy = mysql_real_escape_string($_POST['dob_yyyy']); // Next of Kin $nextkinname = mysql_real_escape_string($_POST['nextkinname']); $nextkintel = mysql_real_escape_string($_POST['nextkintel']); // Availability $days_mon = mysql_real_escape_string($_POST['days_mon']); $days_tue = mysql_real_escape_string($_POST['days_tue']); $days_wed = mysql_real_escape_string($_POST['days_wed']); $days_thu = mysql_real_escape_string($_POST['days_thu']); $days_fri = mysql_real_escape_string($_POST['days_fri']); $days_sat = mysql_real_escape_string($_POST['days_sat']); $days_sun = mysql_real_escape_string($_POST['days_sun']); $availability_am = mysql_real_escape_string($_POST['availability_am']); $availability_pm = mysql_real_escape_string($_POST['availability_pm']); $availability_allday = mysql_real_escape_string($_POST['availability_allday']); $availability_requirements = mysql_real_escape_string($_POST['availability_requirements']); // Experience $experience = mysql_real_escape_string($_POST['experience']); // File Attachments $fileatt_cv = mysql_real_escape_string($_POST['fileatt_cv']); $fileatt_id = mysql_real_escape_string($_POST['fileatt_id']); // Rates $rate = mysql_real_escape_string($_POST['rate']); $rate_specific = mysql_real_escape_string($_POST['rate_specific']); // Employer Ref $employrefname = mysql_real_escape_string($_POST['employrefname']); $employrefcomp = mysql_real_escape_string($_POST['employrefcomp']); $employreftel = mysql_real_escape_string($_POST['employreftel']); $employrefadd = mysql_real_escape_string($_POST['employrefadd']); // Personal Ref $persrefname = mysql_real_escape_string($_POST['persrefname']); $persreftel = mysql_real_escape_string($_POST['persreftel']); $persrefadd = mysql_real_escape_string($_POST['persrefadd']); // Extra Information $allergy = mysql_real_escape_string($_POST['allergy']); $allergy_details = mysql_real_escape_string($_POST['allergy_details']); $drive = mysql_real_escape_string($_POST['drive']); $car = mysql_real_escape_string($_POST['car']); $criminal = mysql_real_escape_string($_POST['criminal']); $criminal_details = mysql_real_escape_string($_POST['criminal_details']); $howlongworkuk = mysql_real_escape_string($_POST['howlongworkuk']); $police_check = mysql_real_escape_string($_POST['police_check']); $right2work = mysql_real_escape_string($_POST['right2work']); $right2workna = mysql_real_escape_string($_POST['right2workna']); // Email Options $subject = "Test Company - Job Application"; $to = "test@test.com"; $mailheader = "From: $email" . "\r\n"; $mailheader .= 'MIME-Version: 1.0' . "\r\n"; $mailheader .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; // Applicants copy $mailheader .= "BCc: $email" . "\r\n"; // Message Content $body .= 'Message'; // End of Email Content > Display Message echo "Thank you. Your application was submitted to us successly. We review all applications carefully and we may contact you shortly."; // Attempt to Send Email mail($to, $subject, $body, $mailheader); } else { echo "Application Failed. Unfortunatley, there was a problem with your application and it was not submitted. Please try again later or alternativley please contact us."; } ?> Thanks in advanced. Hi all, I was wondering if it was possible and not too messy to have a single form page (html) and have it post to 2 or more PHP files? Surely this is something that is desirable and accomplished at some point, right? Thanks. Richard I need to be able to upload multiple files with the use of one form. Right now I have support for one file and it works great. I am stuck on what route I should take for times sake and reliability and functionality. Can I run each file on its own through the PHP script to upload the file; I would have to create a loop to run through the script as many times as there are files. OR Do I create new functionality and add the files through the use of an array? This is where I am getting the ARRAY idea: http://www.phpeasystep.com/phptu/2.html This is the PHP code that is submitting the image and uploading to file system. This is what I would use to loop through multiple files if I take the loop method. <? header("location: /classifieds/index.php"); echo '<html><center>'; //first lets upload any files that were selected// $date = date("m/d/y",time()); //check that we have a file if((!empty($_FILES["uploaded_file"])) && ($_FILES['uploaded_file']['error'] == 0)) { //Check if the file is JPEG image and it's size is less than 350Kb $filename = basename($_FILES['uploaded_file']['name']); $ext = substr($filename, strrpos($filename, '.') + 1); if (($ext == "jpg") && ($_FILES["uploaded_file"]["type"] == "image/jpeg") && ($_FILES["uploaded_file"]["size"] < 2500000)) { //Determine the path to which we want to save this file $newname = dirname(__FILE__).'/uploads/'.$filename; //Check if the file with the same name is already exists on the server if (!file_exists($newname)) { //Attempt to move the uploaded file to it's new place if ((move_uploaded_file($_FILES['uploaded_file']['tmp_name'],$newname))) { //strip off file path for $newname variable so path is not accessible via html// $tempnewname = explode('/', $newname); echo $tempnewname; $newname=$tempnewname[9].'/'.$tempnewname[10]; echo "It's done! The file has been saved as: ".$filename; } else { echo "Error: A problem occurred during file upload!"; } } else { //echo "Error: File ".$_FILES["uploaded_file"]["name"]." already exists";// $timestampname = str_replace('.jpg', date('j-n-Y_g:i:s').'.jpg', (basename($_FILES['uploaded_file']['name']))); $path = dirname(__FILE__).'/uploads/'; $fullname = $path.$timestampname; //strip off file path for $newname variable so path is not accessible via html// $tempnewname = explode('/', $fullname); $newname=$tempnewname[7].'/'.$tempnewname[8]; $picname=$tempnewname[8]; ((move_uploaded_file($_FILES['uploaded_file']['tmp_name'],$newname))); } } else { echo "Error: Only .jpg images under 2.5MB are accepted for upload"; } } else { echo "Error: No file uploaded"; } ?> Thanks for hte help -Beemer Good day all. I am looking for guidence. I am using phpexcell to format an excell file. all working 100% What should i be looking to do when i want to edit and format multiple files in a directory. about 200 excell documents all the same and with same formatting? Found this code for reading, but lets say row c3:i3 i want bold and size 14 in all the excell files
.
.
.
$path = "..."; ///the folder path
$theFilePath = "";
$theFileName = glob ($path . "*.xls");
//Read more than one file here
for($j = 0; $j< count($theFileName); $j++) {
$theFilePath = $theFileName[$j];
$excel = new Spreadsheet_Excel_Reader();
$excel->setOutputEncoding('CP1251');
$excel->setUTFEncoder('mb_convert_encoding');
error_reporting(E_ALL ^ E_NOTICE);
//echo $theFileName[$j];;
echo "<br />";
echo $theFilePath;
echo "<br />";
$excel->read($theFilePath);
.
.
.// Do what u want display here
}
Hi I want to read multiple .txt files and then if an action requires select one. Quote <? // /home/person-mike.txt // /home/person-sarah.txt // /home/person-paul.txt while ($row = sqlite_fetch_array($result)) { $name = $row['name']; $filename = "/home/person-$name.txt"; $handle = fopen($filename, "r"); $sendrequest = fread($handle, filesize($filename)); fclose($handle); } ?> <? if ( $client == "sarah" ) { echo "$sendrequest[sarah]"; ?> How do I do the last bit to have a variable like $sendrequest[sarah] Good day.
I have just written my first php phpexcell file importing into mysql without errors. now my next step is to try and read multiple excell files in a directory " files are same format" and import into mysql.
Heres my code so far.
<?php
$db_host = "localhost";$db_user = "root";$db_pass = "";$db_name ="kk";$db_table = "test";
require '/Classes/PHPExcel.php';
require_once '/Classes/PHPExcel/IOFactory.php';
$objPHPExcel = PHPExcel_IOFactory::load('Amersfoort_WR.xlsx');
foreach ($objPHPExcel->getWorksheetIterator() as $worksheet)
{
$worksheetTitle = $worksheet->getTitle();
$highestRow = $worksheet->getHighestRow(); // e.g. 10
$highestColumn = $worksheet->getHighestColumn(); // e.g 'F'
$highestColumnIndex = PHPExcel_Cell::columnIndexFromString($highestColumn);
$nrColumns = ord($highestColumn) - 64;
echo "File ".$worksheetTitle." has ";
echo $nrColumns . ' columns';
echo ' y ' . $highestRow . ' rows.';
echo "$cellValue";
$link = mysql_connect($db_host,$db_user,$db_pass);
if(!$link) die ('Could not connect to database: '.mysql_error());
mysql_select_db($db_name,$link);
for ($row = 2; $row <= $highestRow; ++ $row)
{
$val=array();
for ($col = 0; $col < $highestColumnIndex; ++ $col)
{
$cell = $worksheet->getCellByColumnAndRow($col, $row);
$val[] = $cell->getValue();
}
$sql = "insert into test (F1, F2, F3, F4) values('".$val['0']."', '".$val['1']."', '".$val['2']."','".$val['3']."')";
mysql_query($sql);
}
}
mysql_close($link);
?>
I am trying to convert 6 files into a single 1 php file. I have attached the original files. I need help because I don't know where I am going wrong. this what I have done so far : <?php session_start(); if ($_SESSION['ON'] =="FALSE" || $_SESSION['ON']==null) { header( 'Location: index.php?error=invalid-login' ); session_unset(); session_destroy(); exit(); } ?> <html><head><meta http-equiv="content-type" content="text/html; charset=iso-8859-1"> <title>LOGIN WEB SESSION</title> <link rel="stylesheet" type="text/css" href="loginsession.css" /> </head> <body> <?php // If the step is one, show the correct form // if ($step == 0) { echo '<form action="index.php?step=2" method="post"> <table> <tr><td width="100">Username:</td><td width="200"><input type="text" name="username"></td></tr> <tr><td width="100">Password:</td><td width="200"><input type="password" name="password"></td></tr> <tr><td colspan="2" align="center"><input type="submit" value="Login"></td></tr> </table> </form>'; } else if ($step == 1) { // Create the step 2 section of the page // function clean($data) { $data = trim($data); $data = stripslashes($data); $data = htmlspecialchars($data); return $data; } $user = clean($_POST['username']); $pass = clean($_POST['password']); if ($user == "webdeveloper" && $pass == "master") { session_start(); $_SESSION['username'] = $user; $_SESSION['password'] = $pass; $_SESSION['ON']="TRUE"; $lifetime=600; setcookie(session_name(),session_id(),time()+$lifetime); header( 'Location: index.php?step=2' ) ; exit(); } else { header( 'Location: index.php' ); session_destroy(); exit(); } } else if ($step == 2) <div>LOGIN WELCOME</div> <div> HERE IS YOUR USER DATA:<br /> <label class="data">username:'; <?php echo $_SESSION['username'] ?> <br> password: <?php echo $_SESSION['password'] ?> <br></label> HERE IS YOUR SESSION DATA:<br /> <label class="data"> <?php echo (session_name().": ".session_id()) ?><br> <?php echo ("SESSION DATA: ".session_encode() )?> </label> </div>index.php?step=3">Logoff</a></div> } else if ($step == 3) { // Create the step 4 section of the page // header( 'Location: index.php' ); session_start(); session_unset(); session_destroy(); exit(); } ?> </body> </html> Hey I have this code which works fine, it echos the file names from a directory into a dropdown box how can I change it to include more then one directory <?php $dirname = "../images/staff"; $dir = opendir($dirname); echo '<select name="file2">'; echo '<option value="">none</option>'; while(false != ($file = readdir($dir))) { if(($file != ".") and ($file != "..")) { echo "<option value=".$file.">$file</option>"; } } echo '</select>'; ?> I tried this but it didnt work any help <?php $dirname = "../images/staff"; $dirname .= "../images/boarddirectors"; $dir = opendir($dirname); echo '<select name="file2">'; echo '<option value="">none</option>'; while(false != ($file = readdir($dir))) { if(($file != ".") and ($file != "..")) { echo "<option value=".$file.">$file</option>"; } } echo '</select>'; ?> hello! in my header.php file i have the following line of code: Code: [Select] <link rel="stylesheet" href="<?php echo $pageCSS; ?>"> in the document proper, i have the following at the top of the page: Code: [Select] <?php $pageCSS="_css/compare.css"; ?> this works as expected and it's clean and neat. what i want to know is how i can adapt this to pass MULTIPLE JavaScript files through it. would it be best to pass an array of files and then step through the array? would be nice to be able to pass a simple comma-delimited list. any help would be appreciated. WR! Hi guys i am kinda stuck at a part where i want a download button to prompt out two download windows in a click. Currently i am able to prompt out one download window only. I have tried putting another header line of Content Disposition but it doesn't work..i will appreciate if you guys can help me out, thanks! The desired scenario will be WinSCP.exe download prompt will appear first, follow by auditgroup.bat $file1 = "WinSCP.exe"; $file = "auditgroup.bat"; //Set headers header("Cache-Control: private"); header("Expires: 0"); header("Pragma: cache"); header("Content-Description: File Transfer"); header("Content-Disposition: attachment; filename=$file"); header("Content-Type: application/octet-stream"); header("Content-Transfer-Encoding: ASCII"); //Read the file from disk readfile($file); I have this code and its downloading file nicely. But I want to show a progress bar while downloading file from external server. My existing code shows progress bar but its not effective (ex. if i try to download two media file, one video and another audio, and video size is larger than audio size the audio finishes first and the progress bar shows 100% also suddenly it drops to 50% as the video is still downloading ). I mean it actually shows two progress and I need one. If I could get average percentage value of two progress that would be better. Any suggestion regarding this will be greatly appreciated. <?php
set_time_limit ( 0 );
function define_progress_callback($i) {
global $conn;
curl_setopt($conn[$i], CURLOPT_PROGRESSFUNCTION, function ($resource,$download_size, $downloaded, $upload_size, $uploaded)
{
if($download_size > 0)
$progress = round($downloaded / $download_size * 100);
echo '<script language="javascript">$(".loader").loader("setProgress", '.$progress.');</script>';
echo str_pad("",1024," ");
flush();
usleep(20000);
});
}
$urls = array("http://example.com/file.mp3",
"http:/example.com/file.mp4");
$save_to='./tmp/';
$conn = array();
$fp = array();
$mh = curl_multi_init();
foreach ($urls as $i => $url) {
$g = $save_to . basename($url);
$conn[$i]=curl_init($url);
$fp[$i]=fopen ($g, "wb");
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, FALSE); // No certificate
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, TRUE);
curl_setopt ($conn[$i], CURLOPT_FILE, $fp[$i]);
curl_setopt ($conn[$i], CURLOPT_HEADER ,0);
curl_setopt($conn[$i],CURLOPT_CONNECTTIMEOUT,60);
curl_setopt ($conn[$i], CURLOPT_MAXCONNECTS, 10);
curl_setopt($conn[$i], CURLOPT_NOPROGRESS, false);
define_progress_callback($i);
curl_multi_add_handle ($mh,$conn[$i]);
}
do {
$n=curl_multi_exec($mh,$active);
}
while ($active);
foreach ($urls as $i => $url) {
curl_multi_remove_handle($mh,$conn[$i]);
curl_close($conn[$i]);
fclose($fp[$i]);
}
curl_multi_close($mh);
?>
Edited by requinix, 18 January 2015 - 08:16 AM. no code tags meant auto-embedding of mp3 |
|||||||