|
PHP - Execute A Shell Command Php Script
Hi guys,
I am new here, and I am a bit stuck with doing something unusual. I want to create a script that can turn on a program (dynamips and dynagen). So far, I have tried 'exec' and 'shell_exec'. Soon I realized that apache runs the commands as 'www-data' user (apache2 in ubuntu) and it's very limited on what you can execute. Is there any way to do that at all? What would be the best practice? I am not concerned about security as this is not a production environment... Thanks Similar TutorialsHi all I have this problem on a server using php5, unix based, safe_mode is On globally, i have turned it off locally through php.ini. Ok, this is testing example script i used: $cmd = ( "php -v" ); $out = shell_exec( $cmd ); print $out; On my own server this returns php version. On this mentioned server i'm using (commercial) this causes complete server breakdown, when logged in with SSH, i can't even issue "ls" command after that, nor find and kill the process. What could be so wrong with it? I don't think calling php-cli would make any difference. Hi everyone, i'm trying to get it so when i visit my webpage called start.php it executes the command (/bigbrotherbot start) in the terminal which then should start the process on my linux machine. I'm currently using this code Code: [Select] <?php shell_exec('sudo /bigbrotherbot start'); ?> This script doesn't appear to do anything though. I'm very new to php and would really appreciate the help. P.S the file bigbrotherbot is the bash script which works if i actually go to the terminal myself and type /bigbrotherbot start yet when i try to make the php do it it doesnt do anything. any ideas? It was suggested that I add a ‘report’ parameter to the code, after revising with the ‘scale2ref’ code which appears to prevent the video from uploading/proceeding: $ffmpegCommand =''.$ffmpeg_b.' -y -i '.$video_file_full_path.' -i '.$watermark_image_full_path.' -filter_complex "[0]scale=426:-2[vid];[1][vid]scale2ref='oh*mdar':'ih/10'[wm][vid];[vid][wm]overlay=5:5:format=rgb,format=yuv420p" -vcodec libx264 -preset '.$pt->config->convert_speed.' -crf 26 -report'.$video_output_full_path_240.' 2>&1'; $shell = shell_exec($ffmpegCommand); I couldn’t see where the -report parameter was supposed to output (error.log has a filesize of 0). So I was asked to “run command from the shell and check”? But, I’m not sure what command and where/how to do that. I tried adding this to the php code, and attempted to upload again, same result
echo shell_exec("/usr/local/bin/ffmpeg -report log.txt 2>&1");
any additional help is appreciated
I want to get a simple true/false to check if my ffmpeg is still converting a video. You can check out the shell command I executed below. convertToFlv( $input, $output ); function convertToFlv( $input, $output ) { echo "Converting $input to $output"; $command = "ffmpeg -y -i $input -acodec libfaac -ar 44100 -ab 96k -vcodec libx264 -level 41 -crf 20 -bufsize 20000k -maxrate 25000k -g 250 -r 20 -s 640x480 -coder 1 -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -flags2 +brdo+dct8x8+bpyramid -me umh -subq 7 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -rc_eq 'blurCplx^(1-qComp)' -bf 16 -b_strategy 1 -bidir_refine 1 -refs 6 -deblockalpha 0 -deblockbeta 0 $output"; shell_exec( $command ); } Can someone provide me some code that will help me check if ffmpeg is still doing the conversion? This topic has been moved to Linux. http://www.phpfreaks.com/forums/index.php?topic=333614.0 Hi, I have a strange problem using the exec command. I have the following php code : <?php error_reporting(E_ALL); ini_set('display_errors','On'); $accountBase = "HORAIREMOBILE"; $primaryUser = "DUM"; $secondaryUser = "DUM"; $result = exec(escapeshellcmd("/home/evidian/utils/getAccount ".escapeshellarg($accountBase)." ".escapeshellarg($primaryUser)." ".escapeshellarg($secondaryUser)),$output,$return_val); echo $result; ?> When I execute the command from the CLI, with any user, it just works fine, and shows my the result (basically a JSON formated output). However, when I call the code frome the apache server, it simply returns nothing. Could anybody help me with this issue ? Hello, I am mounting google drive to my raspberry pi with this command from command line; sudo gdfs -o allow_other /var/www/html/gdfs.creds /media/pi/gdrives İt is working from command line, but it is not work when i execute it from web browser. Here php content;
shell_exec("sudo gdfs -o allow_other /var/www/html/gdfs.creds /media/pi/gdrives");
and i changed my sudoers file giving permission www-data. here is my sudoers file content # This file MUST be edited with the 'visudo' command as root. # # Please consider adding local content in /etc/sudoers.d/ instead of # directly modifying this file. # # See the man page for details on how to write a sudoers file. # Defaults env_reset Defaults mail_badpass Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL:ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL www-data ALL=NOPASSWD: ALL # See sudoers(5) for more information on "#include" directives: #includedir /etc/sudoers.d Can anyone tell me what i am doing wrong ? I've written some code to move a bunch of mp3's from one folder on a network server, rename them...based on the day of the week and date of the month...and then put them on another folder on the original server. Here's the code Code: [Select] #!/usr/bin/php <?php $today = date('m.d.y'); $week = date('W'); $weekplus = $week + 1; $daynumber = date('w'); //$dayofweek = date('D'); if (date('D') == "Mon") { $dayofweek = "mon"; } elseif (date('D') == "Tue") { $dayofweek = "tue"; } elseif (date('D') == "Wed") { $dayofweek = "wed"; } elseif (date('D') == "Thu") { $dayofweek = "thu"; } elseif (date('D') == "Fri") { $dayofweek = "fri"; } //original filenames are in this format 10361MRS-H01T01.mp3 $file1 = "10" . "$weekplus" . "$daynumber" . "MRS-H01T01.mp3"; $file2 = "10" . "$weekplus" . "$daynumber" . "MRS-H01T02.mp3"; $file3 = "10" . "$weekplus" . "$daynumber" . "MRS-H01T03.mp3"; $file4 = "10" . "$weekplus" . "$daynumber" . "MRS-H01S01.mp3"; $file5 = "10" . "$weekplus" . "$daynumber" . "MRS-H01S02.mp3"; $file6 = "10" . "$weekplus" . "$daynumber" . "MRS-H01S03.mp3"; $file7 = "10" . "$weekplus" . "$daynumber" . "MRS-H02T01.mp3"; $file8 = "10" . "$weekplus" . "$daynumber" . "MRS-H02T02.mp3"; $file9 = "10" . "$weekplus" . "$daynumber" . "MRS-H02T03.mp3"; $file10 = "10" . "$weekplus" . "$daynumber" . "MRS-H02S01.mp3"; $file11 = "10" . "$weekplus" . "$daynumber" . "MRS-H02S02.mp3"; $file12 = "10" . "$weekplus" . "$daynumber" . "MRS-H02S03.mp3"; $file13 = "10" . "$weekplus" . "$daynumber" . "MRS-H03T01.mp3"; $file14 = "10" . "$weekplus" . "$daynumber" . "MRS-H03T02.mp3"; $file15 = "10" . "$weekplus" . "$daynumber" . "MRS-H03T03.mp3"; $file16 = "10" . "$weekplus" . "$daynumber" . "MRS-H03S01.mp3"; $file17 = "10" . "$weekplus" . "$daynumber" . "MRS-H03S02.mp3"; $file18 = "10" . "$weekplus" . "$daynumber" . "MRS-H03S03.mp3"; $file19 = "10" . "$weekplus" . "$daynumber" . "MRS-H04T01.mp3"; $file20 = "10" . "$weekplus" . "$daynumber" . "MRS-H04T02.mp3"; $file21 = "10" . "$weekplus" . "$daynumber" . "MRS-H04T03.mp3"; $file22 = "10" . "$weekplus" . "$daynumber" . "MRS-H04S01.mp3"; $file23 = "10" . "$weekplus" . "$daynumber" . "MRS-H04S02.mp3"; $file24 = "10" . "$weekplus" . "$daynumber" . "MRS-H04S03.mp3"; $deletepath = "/var/www/showdownloads/mrshow/"; exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file1' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file2' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file3' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file4' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file5' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file6' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file7' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file8' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file9' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file10' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file11' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file12' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file13' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file14' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file15' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file16' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file17' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file18' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file19' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file20' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file21' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file22' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file23' /var/www/showdownloads/mrshow/"); exec("scp 'root@192.168.2.245:/Volumes/Big\ Disk/Media\ Shooter\ downloads/Matt\ and\ Ramona\ Content\ $today/$file24' /var/www/showdownloads/mrshow/"); rename("$deletepath/$file1", "$deletepath/mr_$dayofweek-2-1.mp3"); rename("$deletepath/$file2", "$deletepath/mr_$dayofweek-2-3.mp3"); rename("$deletepath/$file3", "$deletepath/mr_$dayofweek-2-5.mp3"); rename("$deletepath/$file4", "$deletepath/mr_$dayofweek-2-2.mp3"); rename("$deletepath/$file5", "$deletepath/mr_$dayofweek-2-4.mp3"); rename("$deletepath/$file6", "$deletepath/mr_$dayofweek-2-6.mp3"); rename("$deletepath/$file7", "$deletepath/mr_$dayofweek-3-1.mp3"); rename("$deletepath/$file8", "$deletepath/mr_$dayofweek-3-3.mp3"); rename("$deletepath/$file9", "$deletepath/mr_$dayofweek-3-5.mp3"); rename("$deletepath/$file10", "$deletepath/mr_$dayofweek-3-2.mp3"); rename("$deletepath/$file11", "$deletepath/mr_$dayofweek-3-4.mp3"); rename("$deletepath/$file12", "$deletepath/mr_$dayofweek-3-6.mp3"); rename("$deletepath/$file13", "$deletepath/mr_$dayofweek-4-1.mp3"); rename("$deletepath/$file14", "$deletepath/mr_$dayofweek-4-3.mp3"); rename("$deletepath/$file15", "$deletepath/mr_$dayofweek-4-5.mp3"); rename("$deletepath/$file16", "$deletepath/mr_$dayofweek-4-2.mp3"); rename("$deletepath/$file17", "$deletepath/mr_$dayofweek-4-4.mp3"); rename("$deletepath/$file18", "$deletepath/mr_$dayofweek-4-6.mp3"); rename("$deletepath/$file19", "$deletepath/mr_$dayofweek-5-1.mp3"); rename("$deletepath/$file20", "$deletepath/mr_$dayofweek-5-3.mp3"); rename("$deletepath/$file21", "$deletepath/mr_$dayofweek-5-5.mp3"); rename("$deletepath/$file22", "$deletepath/mr_$dayofweek-5-2.mp3"); rename("$deletepath/$file23", "$deletepath/mr_$dayofweek-5-4.mp3"); rename("$deletepath/$file24", "$deletepath/mr_$dayofweek-5-6.mp3"); exec("scp '/$deletepath/mr_$dayofweek-2-1.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-1.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-2-2.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-2.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-2-3.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-3.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-2-4.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-4.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-2-5.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-5.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-2-6.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-2-6.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-1.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-1.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-2.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-2.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-3.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-3.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-4.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-4.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-5.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-5.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-3-6.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-3-6.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-1.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-1.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-2.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-2.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-3.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-3.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-4.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-4.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-5.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-5.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-4-6.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-4-6.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-1.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-1.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-2.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-2.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-3.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-3.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-4.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-4.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-5.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-5.mp3'"); exec("scp '/$deletepath/mr_$dayofweek-5-6.mp3' 'root@192.168.2.245:/Volumes/Big\ Disk/Show\ Downloads/mrshow/mr_$dayofweek-5-6.mp3'"); ?> The problem is, this is the only way I can get this to work. I actually want to name the files in this format Quote mr_mon_2-1.mp3 Instead of the format now Quote mr_mon-2-1.mp3 The difference being that after the three letter version of the date, I have to have a dash...I want an underscore there. If I try to rename the file to use an underscore...it doesn't use the day of the week...so it turns out to be mr_2-1.mp3 Any ideas what I'm doing wrong? Thanks. In my php web program I'm trying to execute a bash shell script on the web server passing to it some parameters gathered within the program. Ideally I wouldl ike to run this script as another user. However, I get only a return code of "1" and no other error messages that I can see. I tried using system and passthru as well and I'm sure the script is executable by anyone. I've also tried the sticky bit on the target shell script. Can someone/anyone please provide some gotcha pointers about doing this? As can be expected, after playing with this for a week now I'm extremely frustrated and nearly exhausted my resources (except for this forum). Ideas/suggestions please? Thanks I am a bit desperate about this problem that I have been trying to solve for several days now. I'm trying to run a Python script from the exec() function in php. The script is called but the print job is never executed. This process has been running for several years and for no clear reason it suddenly stopped working. On my home computer, it works without any problem. In my virtual machine, nothing happens. The print() functions present in the script are well displayed by the return value received by php but the printing is not executed. The virtual machine is a test environment, in production it is also an physical machine. PHP
<?php
exec("py C:\xampp\htdocs\test\test.py", $out, $res);
echo "<pre>";
print_r($out);
echo "</pre>";
echo "<pre>";
print_r($res);
echo "</pre>";
?>
if __name__ == "__main__":
try:
filename = "C:/xampp/htdocs/test/test.pdf"
win32api.ShellExecute(0, "print", filename, None, ".", 0)
except Exception as e:
print(f "An error occured during print_pdf : {e}")
The two environments are approximately the same: I'd like to point out that running the script directly from the CLI works on both machines. On the problematic machine, exec() only returns the result of print(..) I already opened a thread a few months ago about this problem but received no response.
Thank you in advance. hello dear php-experts and freaks how to view photos and to rapidly change the major categories i have several hundred images (photographs) taht i want to view on opensuse linux version 13.1 i want to view the images - and of while doing so i want to turn the colored images into b/w Question; which is the best - ie. the quickest way to do so. note; i have installed the following thigns on my opensuse 13.1: - gimp the great grahical tool - digicam - the great tool to view images and pictures - Gwenview Version 4.11.4 on KDE 4.11.5 so again here the question: which tool allowes to view the color(ed) image and to turn it - on the fly - in to black and white? BTW: can i tell linux to swith the colors - in general - to black and white? is this doable... looks like we could write a small shell script, utilizing imagemagick. maybe like this: Code: for i in *jpg ; do mogrify -colorspace Gray "$i" ; done this is just a quick hack. i have tried. See more bleow: Also, it's not interactive and simply changes all jpg's to grayscale, even if they already are grayscale. please note that we need to have some more things about imagemagick. well see the results: martin@linux-70ce:~/Bilder> martin@linux-70ce:~/Bilder> for i in *jpg ; do mogrify -colorspace Gray "$i" ; done mogrify: unable to open image `*jpg': Datei oder Verzeichnis nicht gefunden @ error/blob.c/OpenBlob/2643. mogrify: no decode delegate for this image format `*jpg' @ error/constitute.c/ReadImage/552. martin@linux-70ce:~/Bilder> Hi,
I have a cron job that executes this script every 2 minutes:
<?php
// LOAD WP-LOAD.PHP
require('/opt/bitnami/apps/wordpress/htdocs/wp-load.php');
// INCLUDE AND EXECUTE SCHEDULER.PHP
include('/opt/bitnami/apps/wordpress/htdocs/wp-content/themes/yeelloe/scheduler.php');
?>
When I try to include; /opt/bitnami/apps/wordpress/htdocs/wp-content/themes/yeelloe/scheduler.php:
<?php // EXPLODE AND PARSE WP-CONTENT; FUNCTIONS.PHP $parse_uri = explode( '/opt/bitnami/apps/wordpress/htdocs/wp-content', $_SERVER['SCRIPT_FILENAME'] ); // LOAD WP-LOAD.PHP require_once( $parse_uri[0] . '/opt/bitnami/apps/wordpress/htdocs/wp-load.php' ); // LOAD TEMPLATE FUNCTION CheckFunction(); ?> <?php error_reporting(E_ALL); $psPath = "powershell.exe"; $psDir = "C:\\wamp\\www\\ps\\"; $psScript = "SampleHTML.ps1"; $runScript = $psDir. $psScript; $prem = "-Action enable"; $runCMD = $psPath. " " .$runScript. " " .$prem; //var_dump($runCMD); $output = exec($runCMD); echo $output; ?>Hello, I am working on a small project to get results from powershell script by using PHP. For some reason in PHP logs I get Exec unable to fork. Above is the script I wrote to execute powershell script within php. My webserver is IIS 7, and app pool is using a domain user that has full rights for Powershell to execute and get remote server results. Hi
I've been stuck trying to execute a script for a few weeks now and I really need help.
The script is supposed to schedule social media posts via functions.php and wp-load.php but I get errors.
Can someone do me a favour?
Drop your email and I'll send you the details to connect to my database.
Thanks
Seems to be a basic question, but I couldn't find an answer nor figure it out on my own. Basically I have a script that takes out specific data out of the database, the script works on its own, now I just need a way to make the user execute it with a link or a button. Example: Category: [Smileys] - [Category2] - [Category3] - etc. As soon as the user clicks on [Smileys] all data in the database which contains the word smileys in the category field gets selected and outputted as a list. Again the script works, I just need to be able to execute it with a button. If I understood it correctly I have to run the script by adding a if (isset($_POST['Smileys'])) { in front of the script. But how do I build the connection with the text link? Hi,
I am a newbie at php and I recently tried making a small php configuration that runs on the localhost. execution.php
<?php
echo "first script has been executed";
exec('execution2.php');
?>
execution2.php <?php echo "Second script has been executed"; ?> The script is designed to call another php file whereas on the web page I would expect seeing, "first script has been executed" and "Second script has been executed". I am honestly not sure how the execution method is supposed to work however I am not planning on using "include" or "require" since they do not meet my criteria for another project. I am using xampp localhost server on a windows 10 computer. I tried entering "localhost:8080/dir/execution.php" however it did not work.
Any help would be appreciated, thanks! How can I achieve the following scenario with an anchor tag? Code: [Select] if(isset($_POST['submit'])) { // execute script } I do need it for a label system to sort content with labels. Hi,
In reference to my first attached image, I have a form which displays two SELECT/drop-down fields (labeled "Store Name" and "Item Description".....and both of which pull-in values from two separate lookup/master tables, in addition to providing an additional option each for "NEW STORE" and "NEW ITEM").
Now, when first-run, and/or if "NEW STORE" and "NEW ITEM" are not selected from the drop-down's then the two fields in green ("New Store Name" and "New Item Name" are hidden, by means of the following code:
<div class="new-store-container" id="new-store-container" name="new-store-container" style="display:none;">
<div class="control-group">
<div class="other-store" id="new_store_name">
<?php echo standardInputField('New Store Name', 'new_store_name', '', $errors); ?>
</div>
</div>
</div>
Conversely, if "NEW STORE" and/or "NEW ITEM" are selected from the two drop-down's then one (or both) of the "New Name" fields are unhidden by means of the following two pieces of code, one PHP and the second JS:
<select class="store-name" name="store_id" id="store_id" onclick="toggle_visibility('store_id','new-store-container')">
<?php echo $store_options; ?>
<?php
if($values['store_id'] == "OTH")
{
echo "<option value='OTH' selected> <<<--- NEW STORE --->>> </option>";
}
else
{
echo '<OPTION VALUE="OTH"> <<<--- NEW STORE --->>> </OPTION>';
}
?>
</select>
function toggle_visibility(fieldName, containerName)
{
var e = document.getElementById(fieldName);
var g = document.getElementById(containerName);
if (e.value == 'OTH')
{
if(g.style.display == 'none')
g.style.display = 'block';
else
g.style.display = 'none';
}
}
All of that is working just fine. The problem I'm having is that when I click the "Create" button, after having left any one of the form fields blank, the two "New Name" fields are hidden again, which I don't want to happen i.e. I want them to remain visible (since the values of "store_id" and/or "item_id" are "OTH"), so that the user can enter values into one or both of them, without havng to click on the drop-down a second time in order to execute the "on-click" code.
The second attached image shows how the fields are hidden, after clicking "Create".
How can I achieve that? It would be greate if someone could cobble-up the required code and provide it to me, since I'm relatively new to this.
Thanks much.
Snap1.png 26.14KB
0 downloads
Snap2.png 149.47KB
0 downloads
Please tell me how to call, getimagesize() in exec command. http://www.example.com/images!/logos/ps_logo2.png I am using the linux enviroment. If the uRL has "!" symbol, it prints event not found. Please tell me how to avoid this. Hello, I am developing an account manager for our local network and I want people to be able to login to my website and change their UNIX & Mailbox password. These people have SSH access so that is why the UNIX passwd should also be changed. So what I want to do is get the values $username, $currentpwd , $newpwd and $newpwdcnfrm from the HTML form and execute the following shell commands : Quote su -l $username passwd Enter current UNIX Passwd : $currentpwd Enter new UNIX Passwd : $newpwd Confirm UNIX Passwd : $newpwdcnfrm The problem here is, passwd takes old and new passwords as input, not as command parameters. So I cant just do shell_exec("passwd $currentpwd $newpwd $newpwdcnfrm") ; Do you guys know how to give input to the command? thanks. Btw : Please do not argue about the security issues. I am aware of everything and I am perfectly sure that the script will run securely. |
|||||||